FAVORIT 99009 DISHWASHER USER MANUAL
CONTENTS 4 6 7 9 11 13 17 20 21 24 25 SAFETY INFORMATION PRODUCT DESCRIPTION CONTROL PANEL PROGRAMMES OPTIONS BEFORE FIRST USE DAILY USE CARE AND CLEANING TROUBLESHOOTING INSTALLATION TECHNICAL INFORMATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste.
ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. CHILDREN AND VULNERABLE PEOPLE SAFETY WARNING! Risk of suffocation, injury or permanent disability.
ENGLISH cian to change a damaged mains cable. • Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. • Only for UK and Ireland. The appliance has a 13 amp mains plug. If it is necessary to change the fuse in the mains plug, use a 13 amp ASTA (BS 1362) fuse. 5 completed. There can be detergent on the dishes.
PRODUCT DESCRIPTION 2 1 3 4 13 12 11 10 9 8 7 6 5 1 Worktop 10 Detergent dispenser 2 Top spray arm 11 Cutlery basket 3 Upper spray arm 12 Lower basket 4 5 6 7 8 9 Lower spray arm Filters Rating plate Salt container Water hardness dial Rinse aid dispenser 13 Upper basket This appliance has an internal light that comes on when you open the door and goes off when the door is closed.
ENGLISH 7 CONTROL PANEL Messages in the display and acoustic signals help to operate with the appliance. 1 2 4 3 6 5 8 7 1 On/off button 5 Start touchpad 2 Menu touchpad (up) 3 Display 4 Return touchpad 6 OK touchpad 7 Menu touchpad (down) 8 Display touchpad DISPLAY A B C 02:28 13:08 Options The display has 3 areas. To operate in an area, press the display touchpad until the frame of the area comes on.
2. Press one of the menu touchpads to set the number of hours for the delay start. • The upper part of the area shows the delay start. • The lower part of the area shows the approximate end time of the programme. 3. Press OK. 4. Press the return touchpad to close the menu option and go back to area (A). Options area (C) 1. Press the display touchpad to go to this area. 2. Press one of the menu touchpads to go through the menu option. 3. Press OK to set a function or to open the submenu. 4.
ENGLISH 9 PROGRAMMES Programme Degree of soil Type of load Programme phases Options Automatic 1) All Crockery, cutlery, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry Extra hygiene 70° Pro 2) Heavy soil Crockery, cutlery, pots and pans Prewash Wash 70 °C Rinses Dry ProBoost Extra silent 3) Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry 60° Quick 4) Fresh soil Crockery and cutlery Wash 60 °C Rinse Extra hygiene 50° Energy 5) Normal soil Crockery and cutlery Prewas
7) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. Do not use detergent with this programme. Consumption values Programme1) Energy (kWh) Water (l) Automatic 0.9 - 1.7 8 - 15 70° Pro 1.4 - 1.6 13 - 14 Extra silent 1.1 - 1.2 9 - 11 60° Quick 0.8 9 50° Energy 0.9 - 1.0 9 - 11 50 Minutes 1.0 - 1.1 10 - 11 ProZone 1.3 - 1.5 14 - 15 45° Glass 0.8 - 0.9 11 - 12 Prewash 0.
ENGLISH 11 OPTIONS MENU OPTION Menu Submenu Description of the option Muiltitab On Off Activate this function only when you use the combi detergent tablets. These tablets contain detergent, rinse aid and other added agents. Extra hygiene On Off This function gives better results for the hygiene. During the rinsing phase, the temperature stays at 70 °C for 10 to 14 minutes.
Menu Submenu Description of the option Option guide The display shows information about the options. Demo mode On Off Refer to ‘ Demo mode ’. Back To go back to the menu option. MULTITAB FUNCTION This function deactivates the flow of rinse aid and salt. The related indicators are off. The programme duration can increase. Activating the multitab function Activate or deactivate the multitab function before the start of a programme.
ENGLISH 13 BEFORE FIRST USE 1. Activate the appliance. 2. The display shows the default language: Language English. • Press OK to confirm. • Press one of the menu touchpads to set a different language and then press OK to confirm. 3. The display shows the time message. Press one of the menu touchpads to set the time. 4. Press OK to confirm. The display shows the ‘ Programs ’ area. 5. Make sure that the set level of the water softener agrees with the water hardness in your area.
Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Electronic 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Factory position. 2) Do not use salt at this level. Manual adjustment Turn the water hardness dial to the position 1 or 2. Electronic adjustment 1.
ENGLISH 15 FILLING THE SALT CONTAINER CAUTION! Only use dishwasher salt. Other products can cause damage to the appliance. Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. 1. 2. 3. 4. 5. When it is necessary to fill the salt container, the display shows a message. The message is off while a programme operates. Turn the cap counterclockwise and open the salt container.
FILLING THE RINSE AID DISPENSER CAUTION! Only use rinse aid for dishwashers. Other products can cause damage to the appliance. B A M AX 4 3 2 The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains. 1 + - C D 1. 2. 3. 4. Press the release button (D) to open the lid (C). Fill the rinse aid dispenser (A), no more than the mark 'max'. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. Close the lid.
ENGLISH 17 DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. • If the display shows the salt message, fill the salt container. • If the display shows the rinse aid message, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. 5. Set and start the correct programme for the type of load and the degree of soil. LOADING THE BASKETS Refer to the supplied leaflet with examples of the load of the baskets.
WARNING! Be careful when you disengage or engage the support. Removing the holders and the support 1. Disengage the holders from the support and remove them. 2. Push the support to the rear part of the basket to disengage it. Engaging the holders and the support 1. Push the support to the front part of the basket to engage it. 2. Engage the holders from the support. USING THE DETERGENT A CAUTION! Use only detergents for dishwashers. B 30 1. 4 MAX + 32 - 1 20 2. C 3. 4. 5.
ENGLISH Starting a programme without delay start 1. Open the water tap. 2. Press the on/off button to activate the appliance. 3. Close the appliance door. 4. Set the programme and options 5. Press the start touchpad, the programme starts. • The start of the programme does not automatically occur if the salt container and the rinse aid dispenser are empty. The related messages show in the display. Press the start touchpad again. Starting a programme with delay start 1. Set the programme and the options. 2.
CARE AND CLEANING WARNING! Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. CLEANING THE FILTERS 1. C C 2. 3. A B 4. 5. 6. A1 A2 CLEANING THE SPRAY ARMS Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object.
ENGLISH 21 TROUBLESHOOTING The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If not, contact the Service. With some problems, an intermittent acoustic signals operates and the display shows a message. WARNING! Deactivate the appliance before you make the checks. Problem Possible cause Possible solution The programme does not start. The mains plug is not connected in the mains socket. Connect the mains plug.
THE WASHING RESULTS AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause Possible solution The dishes are not clean. The filters are clogged. Clean the filters. The filters are not correctly assembled and installed. Make sure that the filters are correctly assembled and installed. The spray arms are clogged. Remove remaining soil with a thin pointed object. The programme was not applicable for the type of load and soil.
ENGLISH Problem Dry water drop stains on glasses and dishes. 23 Possible cause Possible solution The quantity of detergent was too much. Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. The released quantity of rinse aid was not sufficient . Increase the released quantity of rinse aid. The quality of the detergent Try a different brand of decan be the cause. tergent. The dishes are wet. • The programme had no drying phase.
INSTALLATION WARNING! Refer to “SAFETY INFORMATION”. INSTALLATION UNDER A KITCHEN COUNTER 1. 570-600 mm 820 mm 2. Make sure that the dimensions of the recess agree with the dimensions in the figure. Put the appliance adjacent to a water tap and a water drain. 600 mm 3. 4. 1 5. 2 3 4 Remove the worktop of the appliance. Loosen or tighten the adjustable feet for a correct level of the appliance. With a correct level the appliance door closes and seals correctly.
ENGLISH 25 WATER DRAIN CONNECTION max. 850 mm max. 4000 mm min. 400 mm Connect the water drain hose to: • The sink spigot. Attach the water drain hose under the kitchen counter. This prevents that waste water from the sink goes back to the appliance. • A stand pipe with vent-hole. The internal diameter must be minimum 40 mm. Remove the sink plug when the appliance drains. This prevents water to go back to the appliance.
ENGLISH 27
www.aeg.
