FAVORIT 99015 IM0P DE Benutzerinformation
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMME . . . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Es besteht Erstickungsgefahr, Risiko von Verletzungen oder permanenten Behinderungen.
www.aeg.com Ummantelung mit einem innenliegenden Netzkabel. WARNUNG! Gefährliche Spannung. • Ziehen Sie sofort den Netzstecker aus der Steckdose, wenn der Wasserzulaufschlauch beschädigt ist. Wenden Sie sich für den Austausch des Wasserzulaufschlauchs an den Kundendienst. 1.3 Gebrauch • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
DEUTSCH 2. GERÄTEBESCHREIBUNG 1 2 3 12 11 10 9 8 7 6 5 4 1 Oberer Sprüharm 7 Wasserhärtestufen-Wähler 2 Mittlerer Sprüharm 8 Klarspülmittel-Dosierer 3 Unterer Sprüharm 4 Filter 9 Waschmittelschublade 10 Besteckkorb 5 Typenschild 11 Unterkorb 6 Salzbehälter 12 Oberkorb 3. BEDIENFELD Meldungen im Display und akustische Signaltöne helfen Ihnen bei der Bedienung des Geräts.
www.aeg.com 1 2 4 3 6 5 8 7 1 Taste „Ein/Aus“ 5 Touchpad Start 2 Menü-Touchpad (nach oben) 3 Display 6 Touchpad OK 4 Touchpad Zurück 8 Touchpad „Display“ 7 Menü-Touchpad (nach unten) 3.1 Display A B C 02:28 13:08 Options Das Display ist in drei Bereiche aufgeteilt. Um einen Bereich zu bedienen, berühren Sie das Touchpad „Display“, bis der Rand des Bereiches erscheint. Bereich Programme (A) In diesem Displaybereich werden die einzelnen Programme und ihre entsprechende Dauer angezeigt.
DEUTSCH den verzögerten Programmstart einzustellen. • Im oberen Teil des Bereichs wird die Zeitvorwahl angezeigt. • Im unteren Teil des Bereichs wird die ungefähre Ende-Zeit des Programms angezeigt. 3. Drücken Sie OK. 4. Drücken Sie das Touchpad "Zurück" zum Schließen der Menüoption und zur Rückkehr zum Bereich (A). 7 2. Berühren Sie eines der Menü-Touchpads, um im Menü „Optionen“ zu blättern. 3. Drücken Sie OK, um eine Option einzustellen oder das Untermenü aufzurufen. 4.
www.aeg.
DEUTSCH Programm1) Dauer (Min.) Energieverbrauch (kWh) Wasser (l) 30 Minuten 30 0.8 9 50° ECO 195 1.03 10.2 60 Minuten 55 - 65 1.0 - 1.2 10 - 11 ProZone 130 - 140 1.2 - 1.3 14 - 15 45° Glas 70 - 80 0.7 - 0.9 11 - 12 Vorspülen 14 0.1 4 9 1) Druck und Temperatur des Wassers, die Schwankungen in der Stromversorgung, die ausgewählten Optionen und die Geschirrmenge können die Werte verändern.
www.aeg.com Menü Untermenü Beschreibung der Option TimeSaver Ein Aus Wenn diese Option eingeschaltet ist, erhöht sich der Wasserdruck und die Wassertemperatur. Die Spül- und Trockenphasen verkürzen sich. Die Programmdauer verkürzt sich um etwa 50 %. Die Spülergebnisse entsprechen denen einer normalen Programmdauer. Einstellungen Sprache Deutsch (Es sind verschiedene Sprachen verfügbar.) Sie können die Sprache der Meldungen im Display einstellen. Lautstärke Ein Aus (Es sind 5 Stufen verfügbar.
DEUTSCH Menü 11 Untermenü Beschreibung der Option Demo Betrieb Ein Aus Mit dieser Option können Sie ein Programm simulieren. Die Option ist eingeschaltet, wenn in der oberen linken Ecke des Displays DEMO angezeigt wird. Schalten Sie den Demo Betrieb aus, wenn Sie das Gerät benutzten möchten. Werkseinstellungen: Aus. Zurück Rückkehr zum Optionsmenü. 6. VOR DER ERSTEN INBETRIEBNAHME 1. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. 2.
www.aeg.com Wasserenthärtereinstellung Wasserhärte Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol/l Clarke Wasserhärtegrade Manuell Elektronisch 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Werkseinstellung.
DEUTSCH 13 6.2 Befüllen des Salzbehälters 1. 2. 3. 4. 5. Drehen Sie den Deckel gegen den Uhrzeigersinn und öffnen Sie den Salzbehälter. Füllen Sie 1 Liter Wasser in den Salzbehälter (nur beim ersten Mal). Füllen Sie den Salzbehälter mit Geschirrspülsalz. Entfernen Sie das Salz, das sich um die Öffnung des Salzbehälters herum angesammelt hat. Drehen Sie den Deckel im Uhrzeigersinn, um den Salzbehälter zu schließen. VORSICHT! Beim Befüllen des Salzbehälters können Wasser und Salz austreten.
www.aeg.com 6.3 Befüllen des Klarspülmittel-Dosierers 1. B A M AX 4 3 2 1 + - C D Drücken Sie die Entriegelungstaste (D), um den Deckel (C) zu öffnen. 2. Füllen Sie den Klarspülmittel-Dosierer (A) nicht über die Marke „max“ hinaus. 3. Wischen Sie verschüttetes Klarspülmittel mit einem saugfähigen Tuch auf, um zu große Schaumbildung zu vermeiden. 4. Schließen Sie den Deckel. Achten Sie darauf, dass die Entriegelungstaste einrastet.
DEUTSCH 15 7.1 Verwendung des Reinigungsmittels A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Einstellen und Starten eines Programms Starten eines Programms ohne Zeitvorwahl 1. Öffnen Sie den Wasserhahn. 2. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. 3. Schließen Sie die Gerätetür. 4. Wählen Sie das Programm. Sie können auch die kombinierbaren Optionen einstellen. 5. Drücken Sie das Touchpad "Start" und das eingestellte Programm beginnt.
www.aeg.com 2. Im Display erscheint eine Meldung. Befolgen Sie die Anweisungen, um das Löschen des Programms zu bestätigen. Bevor Sie ein neues Programm starten, stellen Sie sicher, dass der Reinigungsmittelbehälter gefüllt ist. Am Programmende Das Display zeigt eine Meldung an und ein unterbrochenes Signal ertönt. 1. Drücken Sie die Taste „Ein/Aus“, um das Gerät auszuschalten. 2. Schließen Sie den Wasserhahn.
DEUTSCH 5. Stellen Sie die Menge des Klarspülmittels ein. 8.4 Beladen der Körbe Beispiele für die Beladung der Körbe finden Sie in der mitgelieferten Broschüre. • Spülen Sie im Gerät nur spülmaschinenfestes Geschirr. • Spülen Sie im Gerät keine Geschirrteile aus Holz, Horn, Aluminium, Zinn oder Kupfer. • Spülen Sie in diesem Gerät keine Gegenstände, die Wasser aufnehmen können (Schwämme, Geschirrtücher, usw.). • Entfernen Sie Speisereste vom Geschirr.
www.aeg.com 9.1 Reinigen der Filter C 1. Drehen Sie den Filter (A) nach links und nehmen Sie ihn heraus. 2. Um den Filter (A) auseinanderzubauen, ziehen Sie (A1) und (A2) auseinander. Nehmen Sie den Filter (B) heraus. Reinigen Sie die Filter mit Wasser. Prüfen Sie, bevor Sie den Filter (B) wieder einsetzen, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. C A B A1 3. 4. 5. A2 6. 7.
DEUTSCH 19 10. FEHLERSUCHE Das Gerät startet nicht oder bleibt während des Betriebs stehen. Prüfen Sie, ob Sie die Störung mit den folgenden Hinweisen selbst beheben können, bevor Sie den Kundendienst rufen. Bei manchen Problemen zeigt das Display eine Meldung an: Display Problem Achtung: kein Wassereinlauf. Wasserhahn und Einlaufschlauch prüfen. Es läuft kein Wasser in das Gerät. Achtung: Wasser in der Maschine. Anschluss und Verlegung des Ablaufschlauchs prüfen.
www.aeg.com Problem Mögliche Abhilfe Vergewissern Sie sich, dass der Ablaufschlauch nicht geknickt oder zu stark gekrümmt ist. Das Wasserauslauf-Schutzsystem ist eingeschaltet. Drehen Sie den Wasserhahn zu und wenden Sie sich an den Kundendienst. Schalten Sie das Gerät nach der Überprüfung wieder ein. Das Programm wird an der Stelle fortgesetzt, an der es unterbrochen wurde. Tritt das Problem erneut auf, wenden Sie sich an den Kundendienst.
DEUTSCH Leistungsaufnahme 21 Unausgeschaltet 0.10 W Ausgeschaltet 0.10 W 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B. Solaranlagen oder Windkraft) aufbereiten, können Sie durch den Anschluss des Geräts an die Heißwasserversorgung Energie sparen. 12. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern.
www.aeg.
DEUTSCH 23
117914651-A-132013 www.aeg.