FAVORIT 88060 VI0P EN User manual
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 3 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com WARNING! Dangerous voltage. • If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments.
ENGLISH 5 2. PRODUCT DESCRIPTION 1 2 3 12 11 10 9 8 7 6 5 4 1 Top spray arm 7 Water hardness dial 2 Upper spray arm 8 Rinse aid dispenser 3 Lower spray arm 4 Filters 9 Detergent dispenser 10 Cutlery basket 5 Rating plate 11 Lower basket 6 Salt container 12 Upper basket 2.1 TimeBeam TimeBeam is a light beam that shows, on the kitchen floor: • The programme duration. It decreases with steps of one minute. • The end of the programme (0:00). • The time of the delay start.
www.aeg.com 3. CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 6 ÖKO PLUS touchpad 2 Display 7 Multitab touchpad 3 Delay touchpad 4 Program touchpad 8 RESET touchpad 9 Indicators 5 ExtraHygiene touchpad Indicators Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. End indicator. 4.
ENGLISH Programme Degree of soil Type of load Programme phases Options 6 Normal soil Crockery and cutlery Wash 55 °C Rinses ExtraHygiene 7 Normal or light soil Wash 45 °C Delicate crockery Rinses and glassware Dry 8 All 7 ÖKO PLUS Prewash 6) 1) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the programme duration.
www.aeg.com Programme1) Duration (min) Energy (kWh) Water (l) 6 50 - 60 1.0 - 1.1 10 - 11 7 70 - 80 0.8 - 0.9 11 - 12 8 14 0.1 4 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. Information for test institutes For all the necessary information for test performance. send an email to: info.test@dishwasher-production.com Write down the product number (PNC) that is on the rating plate. 5.
ENGLISH How to activate the ExtraHygiene option 1. Press ExtraHygiene. The related indicator comes on. In the display you can see the update of the programme duration. 5.4 Acoustic signals The acoustic signals operate in these conditions: • The programme is completed. • The level of the water softener is adjusted electronically. • The appliance has a malfunction. Factory setting: On. It is possible to deactivate the acoustic signals. Deactivating the acoustic signals 1.
www.aeg.com 6.1 Adjusting the water softener Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Electronic 47 - 50 84 - 90 8.4. - 9.0 58 - 63 2 1) 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.
ENGLISH 11 6.2 Filling the salt container 1. 2. 3. 4. 5. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme.
www.aeg.com 5. Set and start the correct programme for the type of load and the degree of soil. 7.1 Using the detergent A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Setting and starting a programme Setting mode For some settings it is necessary that the appliance is in setting mode. Press the on/off button to activate the appliance. The appliance is in setting mode when the display shows 2 horizontal status bars. If the control panel does not show this condition, press RESET.
ENGLISH At the end of the programme The display shows 0 and the end indicator comes on. 1. Press the on/off button to deactivate the appliance. 2. Close the water tap. If you do not press the on/off button, the AUTO OFF function automatically deactivates the appliance a few minutes after the end of the programme. This helps to decrease the energy consumption, 13 Important • Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged.
www.aeg.com • Make sure that the spray arms can move freely before you start a programme. 8.4 Before starting a programme Make sure that: • The filters are clean and correctly installed. • The spray arms are not clogged. • The position of the items in the baskets is correct. • The programme is applicable for the type of load and for the degree of soil. • The correct quantity of detergent is used. • There is dishwasher salt and rinse aid (unless you use combi detergent tablets).
ENGLISH 6. 7. 15 Make sure that the filter (B) is correctly positioned under the 2 guides (C). Assemble the filter (A) and put it back in filter (B). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance. 9.2 Cleaning the spray arms 9.4 Internal cleaning Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object.
www.aeg.com Problem Possible solution Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clogged. Make sure that the inlet hose has no kinks or bends. The appliance does not drain the water. Make sure that the sink spigot is not clogged. Make sure that the drain hose has no kinks or bends. The anti-flood device is on.
ENGLISH 6. Adjust the released quantity of rinse aid. 17 7. Fill the rinse aid dispenser. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth (mm) Electrical connection Refer to the rating plate. Voltage 596 / 818 - 898 / 55 220-240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) Water supply 1) Cold water or hot water2) (0.5 / 0.05 ) / (8 / 0.8 ) Capacity Place settings 12 Power consumption Left-on mode 0.10 W Off-mode 0.10 W max.
www.aeg.
ENGLISH 19
117931992-A-052012 www.aeg.
