DE Benutzerinformation Geschirrspüler FAVORIT 99605 VI1P
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSINFORMATIONEN.................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................... 4 3. GERÄTEBESCHREIBUNG...............................................................................................6 4. BEDIENFELD................................................................................................................... 7 5.
DEUTSCH 1. 3 SICHERHEITSINFORMATIONEN Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Allgemeine Sicherheit • • • • • • • • • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
www.aeg.com • • Die Lüftungsöffnungen im Gerätesockel (falls vorhanden) dürfen nicht von einem Teppichboden blockiert werden. Das Gerät muss mit den mitgelieferten neuen Schläuchen an die Wasserversorgung angeschlossen werden. Alte Schläuche dürfen nicht wieder verwendet werden. 1.
DEUTSCH • Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Falls das Netzkabel des Geräts ersetzt werden muss, lassen Sie diese Arbeit durch unseren autorisierten Kundendienst durchführen. • Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist.
www.aeg.com • Trennen Sie das Gerät von der Stromversorgung. • Schneiden Sie das Netzkabel ab, und entsorgen Sie es. • Entfernen Sie das Türschloss, um zu verhindern, dass sich Kinder oder Haustiere in dem Gerät einschließen. 3. GERÄTEBESCHREIBUNG 1 2 3 12 11 1 2 3 4 5 6 7 10 9 8 Oberster Sprüharm Oberer Sprüharm Unterer Sprüharm Filter Typenschild Salzbehälter Lüftungsschlitze 3.1 TimeBeam Der TimeBeam ist ein Lichtstrahl, der unterhalb der Gerätetür auf den Boden projiziert wird.
DEUTSCH 4. BEDIENFELD 1 2 3 6 1 2 3 4 Taste „Ein/Aus“ Navigationstaste (nach oben) Display Taste Option 4.1 Tastenbelegung Navigationstasten (nach oben und unten) • Verwenden Sie diese Tasten, um durch die Liste verfügbarer Optionen zu blättern. Option key • Durch ein kurzes Drücken wird die Optionsliste angezeigt. • Durch ein kurzes Drücken in der Optionsliste kehren Sie zur Programmübersicht zurück. • Durch ein kurzes Drücken in der Liste der Einstellungen kehren Sie zur Optionsliste zurück.
www.aeg.
DEUTSCH Programm Verschmutzungsgrad Beladung Programmphasen Vorspülen 8) • Alle • Vorspülen 9 Optionen 1) Dieses Programm gewährleistet den wirtschaftlichsten Wasser- und Energieverbrauch für normal verschmutztes Geschirr und Besteck. (Dies ist das Standardprogramm für Prüfinstitute.) 2) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben. Es stellt dann automatisch die Wassertemperatur und -menge, den Energieverbrauch und die Programmdauer ein.
www.aeg.com 5.2 Informationen für Prüfinstitute info.test@dishwasher-production.com Möchten Sie Informationen zum Leistungstest erhalten, schicken Sie eine E-Mail an: Notieren Sie die Produktnummer (PNC), die Sie auf dem Typenschild finden. 6. EINSTELLUNGEN 6.1 Übersicht der Einstellungen Zur Anzeige der Übersicht der Einstellungen, wählen Sie in der Optionsliste Einstellungen.
DEUTSCH Einstellungen Einstellmöglichkeiten Beschreibung Sprachen Übersicht der Sprachen. Zum Einstellen der bevorzugten Sprache. Voreingestellte Sprache: English. Fußboden-Display Farbübersicht. Zum Einstellen der Farbe von TimeBeam. Werte zurücksetzen 6.2 So ändern Sie eine Einstellung mit 2 Einstellmöglichkeiten (EIN und AUS) Wird eine Einstellung geändert, bleibt sie gespeichert, selbst wenn das Programm beendet oder abgebrochen wird. 1. 2. 3. 4. Drücken Sie die Taste Option.
www.aeg.com Verfügt das Programm über die Option TimeSaver, müssen Sie Schnell oder Normal wählen. 10. Mit OK bestätigen. Das Display bestätigt, dass das Programm MyFavourite gespeichert wurde. 7. OPTIONEN 7.1 Übersicht der Optionen Optionen Einstellmöglichkeiten Beschreibung Zeitvorwahl Von 1 bis 24 Stunden AUS (Standardeinstellung) Zum Einstellen der Zeitvorwahl. AutoOpen EIN (Standardeinstellung) AUS Diese Option spart durch das Öffnen der Gerätetür während des Trockengangs Energie.
DEUTSCH 7.2 So stellen Sie eine Option ein Die Optionsübersicht zeigt nur die Optionen an, die mit dem ausgewählten Programm kombinierbar sind. Optionen, die nicht mit dem Programm kombinierbar sind, sind nicht sichtbar. Einige Optionen können nicht miteinander kombiniert werden. Schalten Sie 2 Optionen ein, die sich nicht miteinander kombinieren lassen, schaltet das Programm automatisch eine der Optionen aus.
www.aeg.com Sie können AutoOpen in der Optionsübersicht ausschalten. In diesem Fall wird der Energieverbrauch erhöht. • Am Programmende wir die Vorrichtung zurückgezogen, die Tür kann jedoch ohne zu schließen offen gehalten oder zurückgezogen werden. ACHTUNG! Versuchen Sie nicht, die Gerätetür zu schließen, während sie von der Vorrichtung offen gehalten wird. Andernfalls kann das Gerät beschädigt werden.
DEUTSCH 15 Wasserhärte Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH). mmol/l Clarke Was- Einstellung für den serhärteWasserenthärter grade 47 - 50 84 - 90 8.4 - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.
www.aeg.com Beim Befüllen des Salzbehälters können Wasser und Salz austreten. Korrosionsgefahr. Starten Sie ein Programm, nachdem Sie den Salzbehälter befüllt haben, um die Korrosion zu vermeiden. Muss der Salzbehälter aufgefüllt werden, wird auf dem Display eine Meldung angezeigt. 8.3 Klarspülmittel-Dosierer Klarspülmittel ermöglichen das Trocknen des Geschirrs ohne Streifen und Flecken. Das Klarspülmittel wird automatisch während der heißen Spülphasen abgegeben.
DEUTSCH 2. Drücken Sie die Taste Ein/Aus, um das Gerät einzuschalten. • Wenn im Display die Meldung, dass Salz aufgefüllt werden muss, angezeigt wird, füllen Sie den Salzbehälter. • Wenn im Display die Meldung, dass Klarspülmittel aufgefüllt werden muss, angezeigt wird, füllen Sie den KlarspülmittelDosierer. 3. Beladen Sie die Körbe. 4. Füllen Sie Reinigungsmittel ein. Wenn Sie die MultiReinigungstabletten verwenden, schalten Sie die Option Multitab ein. 5.
www.aeg.com Sie können den Start eines Programms um 1 bis 24 Stunden verzögern. 6. Mit OK bestätigen. 7. Sie können weitere kombinierbare Optionen auswählen. 8. Drücken Sie Option wiederholt, bis im Display das gewünschte Programm angezeigt wird. 9. Drücken Sie OK. 10. Zum Starten der Zeitvorwahl, schließen Sie die Gerätetür. Nach Ablauf der Zeitvorwahl startet das Programm automatisch. Starten des Programms MyFavourite 1. Halten Sie OK ca.
DEUTSCH • • • • verfügbar) oder wählen Sie ein Programm mit Vorspülgang. Nutzen Sie die Körbe immer ganz aus. Wenn Sie das Gerät beladen, achten Sie darauf, dass das Geschirr komplett von dem Wasser aus den Sprüharmdüsen erreicht und gespült wird. Achten Sie darauf, dass das Geschirr sich weder berührt noch von anderem Geschirr verdeckt wird. Sie können Geschirrspülreiniger, Klarspüler und Salz separat oder Kombi-Reinigungstabletten (z.B. „3in1“, „4in1“, „All-in-1“) verwenden.
www.aeg.com • Spülen Sie in diesem Gerät keine Gegenstände, die Wasser aufnehmen können (Schwämme, Geschirrtücher usw.). • Schütten Sie größere Lebensmittelreste auf dem Geschirr in den Abfallbehälter. • Weichen Sie eingebrannte Essensreste ein. • Ordnen Sie hohle Gefäße (z. B. Tassen, Gläser, Pfannen) mit der Öffnung nach unten ein. • Achten Sie darauf, dass Gläser einander nicht berühren. • Ordnen Sie Besteck und kleine Gegenstände in den Besteckkorb ein.
DEUTSCH 2. Nehmen Sie den Filter (C) aus dem Filter (B). 3. Entfernen Sie den flachen Filter (A). 21 7. Bauen Sie die Filter (B) und (C) wieder zusammen. 8. Setzen Sie den Filter (B) in den flachen Filter (A) ein. Drehen Sie ihn nach rechts, bis er einrastet. 4. Reinigen Sie die Filter. ACHTUNG! Eine falsche Anordnung der Filter führt zu schlechten Spülergebnissen und kann das Gerät beschädigen. 11.2 Reinigen der Sprüharme Bauen Sie die Sprüharme nicht aus.
www.aeg.com 11.4 Reinigung des Geräteinnenraums • Reinigen Sie das Gerät und die Gummidichtung der Tür sorgfältig mit einem weichen, feuchten Tuch. • Wenn Sie regelmäßig Kurzprogramme verwenden, können diese zu Fett- und Kalkablagerungen im Gerät führen. Um dieses zu vermeiden, wird empfohlen, mindestens zweimal im Monat Programme mit langer Laufzeit zu verwenden. 12. FEHLERSUCHE Das Gerät startet nicht oder bleibt während des Betriebs stehen.
DEUTSCH Schalten Sie nach der Überprüfung das Gerät aus und wieder ein. Tritt das Problem erneut auf, wenden Sie sich an einen autorisierten Kundendienst. 23 Wenden Sie sich an einen autorisierten Kundendienst, wenn Alarmmeldungen oder Probleme angezeigt werden, die nicht in der Tabelle angegeben sind. 12.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend Problem Mögliche Abhilfe Weiße Streifen oder blau schimmernder Belag auf Gläsern und Geschirr.
www.aeg.com Leistungsaufnahme Aus-Zustand (W) 0.10 1) Weitere Angaben finden Sie auf dem Typenschild. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B. Solaranlagen oder Windkraft) aufbereiten, können Sie durch den Anschluss des Geräts an die Heißwasserversorgung Energie sparen. 14. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern.
DEUTSCH 25
www.aeg.
DEUTSCH 27
117895210-A-352014 www.aeg.