EN User Manual Dishwasher F99719M0P F99719W0P
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION...........................................................................................6 4. CONTROL PANEL....................................................................................................... 7 5. PROGRAMMES...
ENGLISH manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance. If the appliance has ventilation openings in the base, they must not be covered e.g. by a carpet. The appliance is to be connected to the water mains using the new supplied hose-sets.
ENGLISH 5 2.5 Internal light WARNING! Risk of injury. WARNING! Dangerous voltage. • If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose. 2.4 Use • Do not sit or stand on the open door. • Dishwasher detergents are dangerous. Obey the safety instructions on the detergent packaging. • Do not drink and play with the water in the appliance.
www.aeg.com 3.
ENGLISH 7 4. CONTROL PANEL 1 2 3 4 5 6 10 9 1 2 3 4 5 6 On/off button Program key Navigation key (up) Display Delay key MyFavourite key 4.1 Key behaviour Program key • Short press enters the programme list. Default programme: ECO. • Long press (3 sec.) when a programme is running will delete the programme. The display shows the default programme. • Press at the same time the keys Program and Back to activate or deactivate the option Child lock.
www.aeg.com 5.
ENGLISH Programme Degree of soil Type of load Programme phases Prewash 6) • All • Prewash 9 Options 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard programme for test institutes). 2) The appliance senses the degree of soil and the quantity of items in the baskets . It automatically adjusts the temperature and the quantity of water, the energy consumption and the programme duration.
www.aeg.com Settings Values Description MyFavourite List of programmes Set your favourite daily programme. Refer to specific information provided in this chapter. AirDry ON (default value) OFF Set the automatic door opening for all programmes except Prewash. Refer to the specific information provided in this chapter. End sound ON OFF Informs you when the programme is completed. Factory setting: off. Key tones Off Click Beep Set the sound of the keys when pressed.
ENGLISH 6.3 How to change a setting with multiple values When a setting is changed it will remain valid even if the programme is completed or a running programme is cancelled. 1. 2. 3. 4. 5. Press the Option key. Select Settings. Press the OK key. Select the setting to change. Press the OK key to enter the next level. 6. Select the new value. 7. Press the OK key to confirm. 8. Press repeatedly the Option key until the display shows the programme list. 11 10. Press the OK key to confirm.
www.aeg.com 7. OPTIONS Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. Not all options are compatible with each other. If you have selected non compatible options, the appliance will automatically deactivate one or more of them. Only the indicators of the options still active will stay on. 7.
ENGLISH The XtraDry option is a permanent option for all programmes other than ECO 50° and need not to be selected at every cycle. Every time ECO 50° is activated, XtraDry option is off and needs to be chosen manually. In other programmes, the setting of XtraDry is permanent and it is automatically used in next cycles. This configuration can be changed at any time. Activating XtraDry option deactivates TimeSaver. 7.4 TimeSaver This option increases the pressure and the temperature of the water.
www.aeg.com in your area. It is important to set the right level of the water softener to assure good washing results. Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Water softener level 47 - 50 84 - 90 8.4 - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.
ENGLISH Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. When the salt container needs refilling, the display shows a message. 8.3 The rinse aid dispenser The rinse aid helps to dry the dishes without streaks and stains. The rinse aid is automatically released during the hot rinse phase.
www.aeg.com 5. Set and start the correct programme for the type of load and the degree of soil. 9.1 Using the detergent A B C CAUTION! Only use detergent specifically designed for dishwashers. 1. Press the release button (A) to open the lid (C). 2. Put the detergent, in powder or tablets, in the compartment (B). 3. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. 4. Close the lid. Make sure that the lid locks into position. 9.
ENGLISH the door, the appliance continues from the point of interruption. If the door is opened for more that 30 seconds during the drying phase, the running programme will end. This will not happen when programme ECO with AirDry is running. Cancelling the delay start while the countdown operates When you cancel the delay start the programme and the options are set to their default values. 1. Open the appliance door. 2.
www.aeg.com 10.2 Using salt, rinse aid and detergent 6. Activate the rinse aid empty notification. • Only use salt, rinse aid and detergent for dishwasher. Other products can cause damage to the appliance. • Multi-tablets are usually suitable in areas with a water hardness up to 21 °dH. In areas exceeding this limit, rinse aid and salt must be used in addition to the multi-tablets.
ENGLISH 19 At the end of the program water can still remain on the sides and on the door of the appliance. 11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 11.1 Cleaning the filters The filter system is made of 3 parts. C 4.
www.aeg.com lower arrow and simultaneously turn it clockwise. 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 3. Wash the spray arm under running water.
ENGLISH • Do not use abrasive products, abrasive cleaning pads or solvents. 11.5 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • If you regularly use short duration programmes, these can leave deposits of grease and limescale 21 inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month.
www.aeg.com Problem and alarm code Possible cause and solution The anti-flood device is on. • Close the water tap and contact an Authorised Service Centre. The display shows . The appliance stops and • It is normal. It provides optimal cleaning results and enstarts more times during opergy savings. eration. The program lasts too long. • Select the TimeSaver option to shorten the program time. • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown.
ENGLISH 23 12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and basket loading leaflet. • Use more intensive washing programmes. • Clean spray arm jets and filter. Refer to "Care and Cleaning". Poor drying results. • Tableware has been left for too long inside a closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level.
www.aeg.com Problem Possible cause and solution There are residues of detergent in the dispenser at the end of the programme. • The detergent tablet got stuck in the dispenser and therefore was not completely washed away by water. • Water cannot wash away the detergent from the dispenser. Make sure that the spray arm is not blocked or clogged. • Make sure that items in the baskets do not impede the lid of the detergent dispenser from opening. Odours inside the appliance.
ENGLISH Power consumption Off-mode (W) 25 0.10 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. 14. ENVIRONMENTAL CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances.
www.aeg.
ENGLISH 27
117887720-A-242016 www.aeg.
