EN User Manual Dishwasher F99719M0P F99719W0P
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION...........................................................................................6 4. CONTROL PANEL....................................................................................................... 7 5. PROGRAMMES...
ENGLISH 3 manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance. If the appliance has ventilation openings in the base, they must not be covered e.g. by a carpet. The appliance is to be connected to the water mains using the new supplied hose-sets.
ENGLISH 5 • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. 2.5 Internal lighting WARNING! Risk of injury. WARNING! Dangerous voltage. • If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose. 2.4 Use • Do not sit or stand on the open door. • Dishwasher detergents are dangerous.
www.aeg.com 3.
ENGLISH 7 4. CONTROL PANEL 1 2 3 4 5 6 10 9 1 2 3 4 5 6 On/off button Program key Navigation key (up) Display Delay key MyFavourite key 4.1 Key behaviour Program key • Short press enters the programme list. Default programme: ECO. • Long press (3 sec.) when a programme is running will delete the programme. The display shows the default programme. • Press at the same time the keys Program and Back to activate or deactivate the option Child lock.
www.aeg.com 5.
ENGLISH Programme Degree of soil Type of load Programme phases Prewash 6) • All • Prewash 9 Options 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard programme for test institutes). 2) The appliance senses the degree of soil and the quantity of items in the baskets . It automatically adjusts the temperature and the quantity of water, the energy consumption and the programme duration.
www.aeg.com Settings Values Description MyFavourite List of programmes Set your favourite daily programme. Refer to specific information provided in this chapter. AirDry ON (default value) OFF Set the automatic door opening for all programmes except Prewash. Refer to the specific information provided in this chapter. Brightness From level 0 to level 9. Change the brightness of the display. Contrast From level 0 to level 9. Change the contrast of the display.
ENGLISH 11 6.4 How to save the MyFavourite programme You can only save 1 programme at a time. A new setting cancels the previous one. 1. Press the Option key. 2. Select Settings. 3. Press the OK key. 4. Select MyFavourite. 5. Press the OK key. The display shows the programme list. 6. Select a programme. 7. Press the OK key. 8. The display shows Add option and Done. • Select Done if you want to save a programme without options and press the OK key.
www.aeg.com 7.1 Option list Options Values Description Delay start From 1 to 24 hours OFF (default value) The use of this option delays the start of the programme. XtraDry ON OFF (default value) The use of this option boosts the drying performance. Refer to specific information provided in this chapter. ExtraHygiene ON OFF (default value) The use of this option sanitizes cutlery and tableware. During the last rinsing phase, the temperature stays at 70 °C for at least 10 minutes.
ENGLISH 7.4 TimeSaver This option increases the pressure and the temperature of the water. The washing and drying phases are shorter. The total programme duration decreases by approximately 50%. The washing results are the same as with the normal programme duration but the drying results can be less satisfactory. The TimeSaver option is not applicable to all programmes. 1. Scroll through the programme list and select a programme. 2. Press the OK key to confirm.
www.aeg.com Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Water softener level 47 - 50 84 - 90 8.4 - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 <0.
ENGLISH CAUTION! Water and salt can come out of the salt container when you fill it. After you fill the salt container, immediately start a programme to prevent corrosion. When the salt container needs refilling, the display shows a message. 8.3 The rinse aid dispenser The rinse aid helps to dry the dishes without streaks and stains. The rinse aid is automatically released during the hot rinse phase.
www.aeg.com 4. Add the detergent. 5. Set and start the correct programme for the type of load and the degree of soil. 9.1 Using the detergent A B C CAUTION! Only use detergent specifically designed for dishwashers. 1. Press the release button (A) to open the lid (C). 2. Put the detergent, in powder or tablets, in the compartment (B). 3. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. 4. Close the lid.
ENGLISH the door, the appliance continues from the point of interruption. If the door is opened for more that 30 seconds during the drying phase, the running programme will end. This will not happen when programme ECO with AirDry is running. Cancelling the delay start while the countdown operates When you cancel the delay start the programme and the options are set to their default values. 1. Open the appliance door. 2.
www.aeg.com 10.2 Using salt, rinse aid and detergent 6. Activate the rinse aid empty notification. • Only use salt, rinse aid and detergent for dishwasher. Other products can cause damage to the appliance. • Multi-tablets are usually suitable in areas with a water hardness up to 21 °dH. In areas exceeding this limit, rinse aid and salt must be used in addition to the multi-tablets.
ENGLISH 19 At the end of the program water can still remain on the sides and on the door of the appliance. 11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 11.1 Cleaning the filters The filter system is made of 3 parts. C 4.
www.aeg.com lower arrow and simultaneously turn it clockwise. 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 3. Wash the spray arm under running water.
ENGLISH • Do not use abrasive products, abrasive cleaning pads or solvents. 11.5 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • If you regularly use short duration programmes, these can leave deposits of grease and limescale 21 inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month.
www.aeg.com Problem and alarm code Possible cause and solution The anti-flood device is on. • Close the water tap and contact an Authorised Service Centre. The display shows . The appliance stops and • It is normal. It provides optimal cleaning results and enstarts more times during opergy savings. eration. The program lasts too long. • Select the TimeSaver option to shorten the program time. • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown.
ENGLISH 23 12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and basket loading leaflet. • Use more intensive washing programmes. • Clean spray arm jets and filter. Refer to "Care and Cleaning". Poor drying results. • Tableware has been left for too long inside a closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level.
www.aeg.com Problem Possible cause and solution There are residues of detergent in the dispenser at the end of the programme. • The detergent tablet got stuck in the dispenser and therefore was not completely washed away by water. • Water cannot wash away the detergent from the dispenser. Make sure that the spray arm is not blocked or clogged. • Make sure that items in the baskets do not impede the lid of the detergent dispenser from opening. Odours inside the appliance.
ENGLISH Power consumption Off-mode (W) 25 0.10 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. 14. ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances.
www.aeg.
ENGLISH 27
117887721-A-362017 www.aeg.