FAVORIT 44062i Geschirrspülautomat Benutzerinformation
Sehr geehrte Kundin, sehr geehrter Kunde, lesen Sie bitte diese Benutzerinformation sorgfältig durch und bewahren Sie sie zum späteren Nachschlagen auf. Geben Sie diese Benutzerinformation an eventuelle Nachbesitzer des Gerätes weiter. 1 3 2 3 2 Folgende Symbole werden im Text verwendet: Sicherheitshinweise Warnung! Hinweise, die Ihrer persönlichen Sicherheit dienen. Achtung! Hinweise, die zur Vermeidung von Schäden am Gerät dienen.
Inhalt Gebrauchsanweisung. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Sicherheit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Geräteansicht . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Bedienfeld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Vor der ersten Inbetriebnahme . . . . . . .
Gebrauchsanweisung 1 Sicherheit Vor der ersten Inbetriebnahme • Beachten Sie die „Aufstell- und Anschlussanweisung“. Bestimmungsgemäße Verwendung • Geschirrspüler ist nur zum Spülen von Haushaltsgeschirr bestimmt. • Umbauten oder Veränderungen am Geschirrspüler sind nicht zulässig. • Nur Spezialsalz, Reinigungs- sowie Klarspülmittel verwenden, die für Haushaltsgeschirrspüler geeignet sind. • Keine Lösungsmittel in den Geschirrspüler geben.
Geräteansicht Decken-Dusche Oberkorb-Sprüharm und Boden-Sprüharm Härtebereichsschalter Vorratsbehälter für Spezialsalz Behälter für Reinigungsmittel Vorratsbehälter für Klarspüler Typschild Siebe Bedienfeld EIN / AUS-Taste Mit der EIN-/AUS-Taste wird der Geschirrspüler ein-/ausgeschaltet.
Zeitvorwahl Funktions-Tasten 1 SpülprogrammendeAnzeige ProgrammablaufAnzeigen 2 FunktionsTaste Programm-Tasten 3in1 Funktion auswählen Kontroll-Anzeigen Mit den Programm-Tasten wird das gewünschte Spülprogramm gewählt.
Vor der ersten Inbetriebnahme 3 1. Wasserenthärter einstellen 2. Spezialsalz für Wasserenthärter einfüllen 3. Klarspüler einfüllen Wenn Sie 3in1 Reiniger verwenden wollen, beachten Sie folgendes: – Lesen Sie zuerst den Abschnitt „Verwendung von 3in1 Reinigern“. – Geschirrspüler einschalten, 3in1 Taste drücken. Anzeige der Taste leuchtet: 3in1 Funktion ist ausgewählt! Sie brauchen daher – weder Spezialsalz noch Klarspüler einfüllen. – den Wasserenthärter nicht einstellen.
2. Funktions-Taste 2 und 3 gleichzeitig drücken und gedrückt halten. Die LED-Anzeigen der Funktions-Tasten 1 bis 3 blinken. 3. Funktions-Taste 1 drücken. Die LED-Anzeige der Funktions-Taste 1 blinkt. Gleichzeitig blinkt die LED-Anzeige für Spülprogrammende: – Die Anzahl der Blinkzeichen der LED-Anzeige für Spülprogrammende entspricht der eingestellten Härtestufe. – Diese Blinkzeichenfolge wird nach jeweils 3 Sekunden Pause mehrmals wiederholt. 4. Drücken der Funktions-Taste 1 erhöht die Härtestufe um 1.
Spezialsalz einfüllen 3 3 Um den Wasserenthärter zu entkalken, muss Spezialsalz eingefüllt werden. Nur Spezialsalz verwenden, das für Haushaltsgeschirrspüler geeignet ist. Wenn Sie keinen 3in1 Reiniger verwenden, füllen Sie Spezialsalz ein: – Vor der ersten Inbetriebnahme des Geschirrspülers. – Wenn auf dem Bedienfeld die Kontrollanzeige für Spezialsalz leuchtet. 1. Tür öffnen, Unterkorb herausnehmen. 2. Verschlusskappe des Salzvorratsbehälters entgegen dem Uhrzeigersinn aufdrehen. 3.
Klarspüler einfüllen Da der Klarspüler das Spülwasser besser ablaufen lässt, erhält man flekkenfreies, glänzendes Geschirr und klare Gläser. Wenn Sie keinen 3in1 Reiniger verwenden, füllen Sie Klarspüler ein: – Vor der ersten Inbetriebnahme des Geschirrspülers. – Wenn auf dem Bedienfeld die Kontrollanzeige für Klarspüler leuchtet. Verwenden Sie nur Spezialklarspüler für Geschirrspüler und keine anderen flüssigen Reinigungsmittel. 1. Tür öffnen.
Klarspülerdosierung einstellen 3 Dosierung nur dann verändern, wenn auf Gläsern und Geschirr Schlieren, milchige Flecken (Dosierung niedriger einstellen) oder angetrocknete Wassertropfen (Dosierung höher einstellen) zu sehen sind (Siehe Kapitel „Wenn das Spülergebnis nicht zufriedenstellend ist“). Die Dosierung kann von 1-6 eingestellt werden. Vom Werk ist die Dosierung auf „4“ voreingestellt. 1. Geschirrspülertür öffnen. 2. Entriegelungsknopf des Klarspülerfachs drücken. 3. Deckel aufklappen. 4.
Im täglichen Gebrauch Besteck und Geschirr einordnen 1 Schwämme, Haushaltstücher und alle Gegenstände, die sich mit Wasser vollsaugen können, dürfen nicht im Geschirrspüler gereinigt werden. Kunststoff- und teflonbeschichtetes Geschirr hält Wassertropfen verstärkt zurück. Daher trocknet dieses Geschirr etwas schlechter als Porzellan und Edelstahl.
Besteck einordnen 1 Warnung: Spitze Messer und scharfkantige Besteckteile müssen wegen Verletzungsgefahr in den Oberkorb gelegt werden. Damit alle Besteckteile im Besteckkorb vom Wasser umspült werden, sollten Sie: 1.Gittereinsatz auf den Besteck- 2.Gabeln und Löffel mit dem Griff korb aufstecken nach unten in den Gittereinsatz des Besteckkorbs stellen. Für größere Besteckteile, wie z.B. Schneebesen, kann eine Hälfte des Besteckgitters weggelassen werden.
Töpfe, Pfannen, große Teller Größeres und stark verschmutztes Geschirr im Unterkorb einordnen (Teller bis 29 cm Durchmesser). Um größeres Geschirr leichter einordnen zu können, sind die beiden rechten Tellereinsätze des Unterkorbs klappbar.
Tassen, Gläser, Kaffeeservice Kleineres, empfindliches Geschirr und lange, spitze Besteckteile im Oberkorb einordnen. • Geschirrteile auf und unter den klappbaren Tassenauflagen versetzt anordnen, damit das Spülwasser alle Geschirrteile erreicht. • Für hohe Geschirrteile lassen sich die Tassenauflagen hochklappen. • Wein-oder Cognacgläser in die Ausschnitte der Tassenauflagen lehnen bzw. hängen.
Oberkorb in der Höhe verstellen Maximale Höhe des Geschirrs im 3 Oberkorb Unterkorb bei angehobenem Oberkorb 22 cm 30 cm bei abgesenktem Oberkorb 24 cm 29 cm Die Höhenverstellung ist auch bei beladenen Körben möglich. Anheben / Absenken des Oberkorbs 1. Oberkorb ganz herausziehen. 2. Oberkorb bis zum Anschlag anheben und senkrecht absenken. Der Oberkorb rastet in der unteren bzw. oberen Position ein.
Reinigungsmittel einfüllen 1 Reinigungsmittel lösen die Verschmutzungen von Geschirr und Besteck. Das Reinigungsmittel muss vor Programmbeginn eingefüllt werden. Verwenden Sie nur Reinigungsmittel für Haushaltsgeschirrspüler. Das Fach für Reinigungsmittel ist auf der Innenseite der Tür. 1. Falls der Deckel geschlossen ist: Entriegelungsknopf drücken. Deckel springt auf. 3 2. Reinigungsmittel in den Behälter für Reinigungsmittel füllen.
Kompaktreiniger 2 Reinigungsmittel für Geschirrspüler sind heute fast ausschließlich niederalkalische Kompaktreiniger mit natürlichen Enzymen in Tablettenoder Pulverform. 50 °C-Spülprogramme in Verbindung mit diesen Kompaktreinigern entlasten die Umwelt und schonen Ihr Geschirr, denn diese Spülprogramme sind speziell auf die schmutzlösenden Eigenschaften der Enzyme im Kompaktreiniger abgestimmt.
Spülprogramm auswählen (Programmtabelle) Reinigen Zwischenspülen Klarspülen Trocknen a 70° Ess- und Kochgeschirr stark verschmutzt, angetrocknete Speisereste, besonders Eiweiß und Stärke • • 2x • • AUTOMATIC2) Ess- und (50°-65°) Kochgeschirr normal verschmutzt, angetrocknete Speisereste • • 1 bis 2x • • Geschirr ohne frisch benutzt, leicht Töpfe bis normal verschmutzt - • - • - 30 0,8 9 Ess- und Kochgeschirr, temperaturempfindliches Geschirr • • • • • 130 - 150 0,95 - 1,0
Spülprogramm starten 1. Überprüfen, ob sich die Sprüharme frei drehen können. 2. Wasserhahn ganz aufdrehen. 3. Tür schließen. 4. EIN/AUS-Taste drücken. 5. Gewünschtes Programm wählen. Die Programmanzeige leuchtet. Ein oder zwei Lampen der Programmablaufanzeige blinken. Nach ungefähr 3 Sekunden beginnt das gewählte Spülprogramm. Spülprogramm unterbrechen oder abbrechen Unterbrechen Sie ein laufendes Spülprogramm nur, wenn es unbedingt notwendig ist.
2. Spülprogramm wählen. Die LED-Anzeige des gewählten Spülprogramms und die Anzeige neben der Stundenanzahl leuchten. Nach Ablauf der eingestellten Stunden startet das Spülprogramm automatisch. Zeitvorwahl ändern: Solange das Spülprogramm nicht begonnen hat, können Sie durch Drücken der Taste Zeitvorwahl die Einstellung noch ändern. Zeitvorwahl löschen: Drücken Sie die Taste Zeitvorwahl so oft, bis keine der drei Stundenanzeigen mehr aufleuchtet. Das gewählte Spülprogramm beginnt sofort.
Pflege und Reinigung 1 Keine Möbelpflege- oder aggressive Reinigungsmittel verwenden. • Bedienteile des Geschirrspülers mit einem weichen Lappen und warmem, klarem Wasser reinigen. • Innenbehälter, Türdichtung und Wasserzulaufsieb (falls vorhanden) gelegentlich auf Verschmutzungen kontrollieren und gegebenfalls reinigen. Reinigung der Siebe 3 Die Siebe müssen regelmäßig kontrolliert und gereinigt werden. Verschmutzte Siebe beeinträchtigen das Spülergebnis. 1. Tür öffnen, Unterkorb herausnehmen. 2.
7. Grob-/Feinsieb in den Mikrofilter einsetzen und zusammenstecken. 8. Siebsystem einsetzen und durch Schwenken des Griffs im Uhrzeigersinn bis zum Anschlag verriegeln. Darauf achten, daß das Flächensieb nicht über den Spülraumboden heraussteht. 1 Ohne Siebe darf auf keinen Fall gespült werden. Was tun, wenn...
Störung Mögliche Ursache Wasserhahn ist verstopft oder verkalkt. Abhilfe Wasserhahn reinigen. Wasserhahn ist geschlossen. Wasserhahn öffnen. Die Programmanzeige des gewählten Spülprogramms blinkt, die Anzeige für Spülprogrammende blinkt im Rhythmus 1 kurzes Lichtsignal mit ca. 3 Sekunden Pause dazwischen: es läuft kein Wasser in den Geschirrspüler. Sieb (falls vorhanden) in der Sieb in der SchlauchverSchlauchverschraubung am schraubung reinigen. Wasserhahn ist verstopft.
Störung Mögliche Ursache Abhilfe Im Spülraum sind Rostflecken sichtbar. Spülraum besteht aus rostfreiem Edelstahl. Rostflekken im Spülraum sind auf Fremdrost zurückzuführen (Rostteilchen aus Wasserlei- Nur geeignetes Besteck und Geschirr spülen. tung, von Töpfen, Besteck usw.). Beseitigen Sie solche Flecken mit einem handelsüblichen Edelstahlputzmittel. Pfeifendes Geräusch beim Spülen. Das Pfeifen ist unbedenklich. Anderen Markenreiniger verwenden.
Entsorgung 2 2 1 Verpackungsmaterial Die Verpackungsmaterialien sind umweltverträglich und wiederverwertbar. Die Kunststoffteile sind gekennzeichnet, z. B. >PE<, >PS< etc. Entsorgen Sie die Verpackungsmaterialien entsprechend ihrer Kennzeichnung bei den kommunalen Entsorgungsstellen in den dafür vorgesehenen Sammelbehältern. Altgerät Entsorgen Sie Ihr ausgedientes Gerät nach den an Ihrem Wohnort gültigen Entsorgungsrichtlinien. Warnung! Bei ausgedienten Geräten Netzstecker aus der Steckdose ziehen.
Hinweise für Prüfinstitute Die Prüfung nach EN 60704 muß bei voller Beladung mit dem Testprogramm (siehe Programmtabelle) durchgeführt werden. Die Prüfungen nach EN 50242 müssen mit vollem Salzbehälter des Wasserenthärters, mit vollem Vorratsbehälter für Klarspüler und mit dem Testprogramm (siehe Programmtabelle) durchgeführt werden. Volle Beladung: Halbvolle Beladung: 12 Maßgedecke 6 Maßgedecke einschl. Servicegeeinschl. Servicegeschirr schirr, jeden 2.
Aufstell- und Anschlussanweisung 1 Sicherheitshinweise für die Installation • Den Geschirrspüler nur stehend transportieren, sonst kann Salzwasser auslaufen. • Vor Inbetriebnahme den Geschirrspüler auf Transportschäden überprüfen. Ein beschädigtes Gerät auf keinen Fall anschließen. Wenden Sie sich im Schadensfall an Ihren Lieferanten.
Aufstellen des Geschirrspülers • Geschirrspüler muss standsicher und waagrecht in alle Richtungen ausgerichtet auf festem Boden aufgestellt werden. • Um Bodenunebenheiten auszugleichen und Gerätehöhe an andere Möbel anzugleichen, Schraubfüße mit einem Schraubendreher herausschrauben. • Die hinteren Gerätefüße sind mit einem Akkuschrauber vorne am Gerät einzustellen (siehe Montageanweisung).
Integrierbarer Geschirrspüler 3 30 (siehe beiliegende Montageschablone) Die Gerätetür kann mit einer Holzplatte/Möbelplatte folgender Abmessungen verkleidet werden: Breite: 591 – 594 mm Dicke: 16 – 24 mm Höhe: (variabel) abhängig von Gewicht: max. 8 kg – Nischenhöhe – Sockelhöhe – Anpassung an Fugenverlauf benachbarter Möbel Das genaue Höhenmaß muss am Aufstellort von den benachbarten Möbeln abgemessen werden.
Anschließen des Geschirrspülers Wasseranschluss • Der Geschirrspüler kann an Kaltwasser und an Warmwasser bis max. 60 °C angeschlossen werden. • Der Geschirrspüler darf nicht an offene Warmwassergeräte und Durchlauferhitzer angeschlossen werden. Zulässiger Wasserdruck Niedrigster zulässiger Wasserdruck: 1 bar (=10 N/cm2 =100 kPa) Unter 1 bar Wasserdruck ziehen Sie bitte ihren Installateur zu Rate.
Wasserablauf 1 Ablaufschlauch Der Ablaufschlauch darf nicht geknickt, gequetscht oder in sich verschlungen sein. Anschluss des Ablaufschlauches: – maximal zulässige Höhe: 1 Meter. – minimal erforderliche Höhe: 40 cm über der Geräteunterkante. Verlängerungsschläuche • Verlängerungsschläuche sind über den Fachhandel oder unseren Kundendienst zu beziehen. Der Innendurchmesser der Verlängerungsschläuche muss 19 mm betragen, damit die Gerätefunktion nicht gestört wird.
Wasserschutzsystem Zum Schutz gegen Wasserschäden ist der Geschirrspüler mit einem Wasserschutzsystem ausgestattet. Im Fehlerfall unterbricht das Sicherheitsventil im Zulaufschlauch sofort den Wasserzulauf und die Entleerungspumpe schaltet sich ein. Damit kann Wasser weder aus- noch überlaufen. Im Gerät befindliches Restwasser wird automatisch abgepumpt. Elektrischer Anschluss Angaben über Netzspannung, Stromart und die erforderliche Absicherung sind dem Typschild zu entnehmen.
Anschlusstechnik Zulauf- und Ablaufschläuche sowie das Netzkabel müssen seitlich vom Geschirrspüler angeschlossen werden, da hinter dem Gerät kein Platz dafür ist.
Garantiebedingungen/Kundendienststellen Deutschland Der Endabnehmer dieses Gerätes (Verbraucher) hat bei einem Kauf dieses Gerätes von einem Unternehmer (Händler) in Deutschland im Rahmen der Vorschriften über den Verbrauchsgüterkauf gesetzliche Rechte, die durch diese Garantie nicht eingeschränkt werden. Diese Garantie räumt dem Verbraucher also zusätzliche Rechte ein.
Österreich Sehr geehrte Kunden! Wir, die Electrolux Hausgeräte GmbH, beglückwünschen Sie zum Erwerb eines Gerätes aus dem Electrolux Konzern. Für dieses Gerät räumen wir Ihnen, gemäß den nachstehenden Bedingungen, eine besondere Garantie ein, die Ihnen also zusätzliche Rechte gewährt. 1. Die Garantie beginnt mit dem Tag an dem das Gerät gekauft wurde und erstreckt sich über einen Zeitraum von 24 Monaten. Wir empfehlen daher, den Kaufbeleg unbedingt aufzubewahren. 2.
Österreich Unsere Kundendienststellen und Servicepartner Electrolux stellt Ihnen hiermit jene Partner vor, die dafür garantieren, dass wir Ihnen Top-Qualität mit unseren Kundendiensteinrichtungen jetzt und in Zukunft bieten. Unsere Kundendienststellen in den Bundesländern sind spezialisiert auf unsere Marken: AEG, Electrolux, Juno, Zanussi. Zentrale: Kundendienst Wien, Niederösterreich, nördliches Burgenland Electrolux Hausgeräte GmbH 1230 Wien, Herziggasse 9 Tel. Reparaturannahme 01/86640-330 Tel.
Service Wenn Sie einmal unsere Hilfe benötigen, erreichen Sie uns in Deutschland wie folgt: Bei Fragen zu Bedienung oder Einsatz Ihres Gerätes Wenden Sie sich an den AEG-Direct Info Service: Telefon: 0180 555 4 555 (0,12 Euro/Min)** Internet: www.aeg-hausgeraete.de Bei technischen Störungen Prüfen Sie bitte zunächst, ob Sie mit Hilfe der Gebrauchsanweisung (Kapitel „Was tun, wenn...“) das Problem selbst beheben können.
From the Electrolux GroupK=qÜÉ=ïçêäÇ…ë=kçKN=ÅÜçáÅÉK aáÉ=bäÉÅíêçäìñJdêìééÉ=áëí=ÇÉê=ïÉäíïÉáí=Öê∏≈íÉ=eÉêëíÉääÉê=îçå=Ö~ëJ=ìåÇ=ëíêçãÄÉíêáÉÄÉåÉå=dÉê®íÉå=ÑΩê=ÇáÉ=hΩÅÜÉI òìã= oÉáåáÖÉå= ìåÇ= ÑΩê= cçêëí= ìåÇ= d~êíÉåK=gÉÇÉë= g~Üê= îÉêâ~ìÑí= ÇáÉ=bäÉÅíêçäìñJdêìééÉ= áå= ΩÄÉê= NRM=i®åÇÉêå= ÇÉê bêÇÉ= ΩÄÉê= RR= jáääáçåÉå= mêçÇìâíÉ= EhΩÜäëÅÜê®åâÉI= eÉêÇÉI= t~ëÅÜã~ëÅÜáåÉåI= pí~ìÄë~ìÖÉêI= jçíçêë®ÖÉå= ìåÇ o~ëÉåã®ÜÉêF=ãáí=ÉáåÉã=tÉêí=îçå=êìåÇ=NQ=jêÇK=rpaK AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.