Informations pour les utilisateurs Lave-vaisselle VA6011AF
Chère cliente, cher client, veuillez lire avec soin ces informations pour les utilisateurs. Tenez surtout compte de la section “Sécurité” des premières pages de ces informations pour les utilisateurs! Conservez ces informations aux utilisateurs pour un usage ultérieur. Transmettez-les à un éventuel possesseur ultérieur de la machine.
Sommaire SOMMAIRE Mode d'emploi ............................................. 5 Consignes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Protection de l’environnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Laver la vaisselle de manière économique et ménageant l’environnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Vue de l'appareil et bandeau de commande . . . . . . . . . . . . . . . . .
Sommaire Entretien et nettoyage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Nettoyage du filtre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Que faire quand... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...les messages d'erreur sont indiqués. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...il y a des problèmes lors du fonctionnement du lave-vaisselle. . . . . . .
Mode d'emploi MODE D'EMPLOI 1 Consignes de sécurité La sécurité des appareils électroménagers ATAG est conforme aux règles reconnues de la technique et à la législation portant sur la sécurité des appareils. En tant que fabricant, nous attirons cependant votre attention sur les indications supplémentaires suivantes: Installation, raccordement, mise en service • Le lave-vaisselle peut uniquement être transporté debout. • Contrôlez le lave-vaisselle pour dégâts de transport éventuels.
Mode d'emploi • Lors de la mise au rebut du lave-vaisselle: coupez le câble d'alimentation au ras de l'appareil et jetez-le. Neutralisez le dispositif de fermeture de porte, de façon à ce que la porte ne ferme plus. Sécurité générale • Les réparations sur le lave-vaisselle peuvent uniquement être effectuées par du personnel qualifié. Les réparations non effectuées dans les règles peuvent être la source de dangers importants pour l'utilisateur.
Mode d'emploi • Le système de protection contre les fuites d'eau protège de manière fiable contre les dégâts des eaux. Les conditions suivantes doivent cependant être remplies à cet effet: – L'appareil doit également rester raccordé à l'alimentation électrique lorsqu'il n'est pas en service. – Le lave-vaisselle doit être installé correctement. – Fermez toujours le robinet d'arrivée d'eau lorsque le lave-vaisselle n'est pas utilisé pendant une période prolongée, p. ex. durant un voyage de vacances.
Mode d'emploi 2 Laver la vaisselle de manière économique et ménageant l’environnement • Ne raccordez le lave-vaisselle à une alimentation en eau chaude que si vous disposez d’une installation d’eau chaude qui ne chauffe pas à l’électricité. • Réglez correctement l’adoucisseur. • Ne rincez pas préalablement la vaisselle à l’eau courante.
Mode d'emploi Vue de l'appareil et bandeau de commande Bras de lavage supérieur Joint en caoutchouc pour couplage de la tuyauterie d'arrivée d'eau au bras de lavage Bras de lavage Commutateur de plage de dureté Réservoir pour sel régénérant Réservoir de produit de lavage Réservoir pour produit de rinçage Plaque signalétique Filtres 9
Mode d'emploi Bandeau de commande Touches de fonction Poignée de la porte Départ différé Voyants 1 2 3 4 Touche MARCHE/ ARRET Fenêtre d’affichage Zone de commande La zone de commande se compose de la touche MARCHE/ARRET et des touches de programme avec leurs voyants.
Mode d'emploi Avant la première utilisation Avant la mise en service, retirez les attaches en plastique avec lesquelles les paniers à vaisselle ont été bloqués pendant le transport. Procédez ensuite aux étapes suivantes: 1. Réglez l’adoucisseur 2. Remplissez le réservoir de sel régénérant 3. Remplissez le réservoir de liquide de rinçage Adoucisseur d'eau Suivant les localités, l’eau contient une quantité variable de sels calcaires et minéraux.
Mode d'emploi 3) Cette modalité de réglage peut susciter une brève prolongation du programme. *) Préréglage usine Réglage de l'adoucisseur d'eau 0 Régler l´adoucisseur d´eau conformément au tableau en fonction de la dureté de l´eau de votre région. Le lave-vaisselle doit être désactivé. Réglage manuel : 1. Ouvrir la porte du lave-vaisselle. 2. Retirez le panier inférieur du lavevaisselle. 3. Positionnez le sélecteur de dureté sur 0 ou sur 1 (voir tableau). 4. Replacez le panier inférieur.
Mode d'emploi Le sel régénérant 3 Si la dureté de votre eau correspond aux degrés de niveau 1, il n’est pas nécessaire d’utiliser du sel régénérant car elle est déjà douce. Il existe 2 façons différentes d’utiliser le sel régénérant : • Si vous utilisez du produit de lavage pour lave vaisselle qui contient du sel celui-ci doit être déposé dans le réservoir du produit de lavage. – Dans ce cas, l’adoucisseur d’eau doit être réglé manuellement sur 0 et automatiquement sur 1.
Mode d'emploi Remplissage du réservoir de sel régénérant Si vous utilisez séparément un produit de lavage et du sel régénérant, versez le sel spécifique : – Avant la première utilisation du lave-vaisselle. – Quand le voyant de contrôle J s'allume sur le bandeau de commande. 0 1. Ouvrez la porte, retirez le panier inférieur. LE SA ALT Z 2. Dévissez et ôtez le bouchon du réserS AL S EL voir de sel. S 3. Uniquement lors de la première utilisation: Remplissez entièrement d’eau le réservoir de sel. 4.
Mode d'emploi Le produit de rinçage Ce produit évite que l’eau ne reste sur la vaisselle sous forme de gouttelettes laissant des taches blanches après séchage. Il existe deux façons différentes d’utiliser le produit de rinçage : • Si vous utilisez un produit de lavage contenant déjà un produit de rinçage, versez-le dans le distributeur de produit de lavage. – Dans ce cas, le distributeur de produit de rinçage doit être désactivé.
Mode d'emploi La fenêtre d’affichage indique le réglage en cours : 0d Le distributeur de produit de rinçage est désactivé 1d Le distributeur de produit de rinçage est activé (préréglage en usine) 4. Une pression sur la touche de fonction 2 active ou désactive le distributeur de produit de rinçage. 5. Dès que la fenêtre d’affichage indique le réglage désiré, appuyez sur la touche MARCHE/ARRET.
Mode d'emploi 4. Versez le produit de rinçage dans l’orifice de remplissage sans dépasser le repère maximum (ligne en pointillé) qui correspond à une quantité maximale de remplissage d'env. 140 ml. 5. Refermez le couvercle et appuyez dessus jusqu'au verrouillage. Epongez soigneusement tout débordement pour éviter une formation excessive de mousse lors d’un futur lavage. Utilisez uniquement du produit de rinçage spécial lave-vaisselle. Tout autre produit risque d’endommager votre appareil.
Mode d'emploi Utilisation journalière • Faut-il compléter le sel régénérant ou le produit de rinçage? • Disposez les couverts et la vaisselle dans le lave-vaisselle • Remplissez le réservoir de produit de lavage pour lave-vaisselle • Sélectionnez un programme de lavage convenant aux couverts et à la vaisselle • Lancez le programme de lavage Disposez les couverts et la vaisselle 1 Les éponges, serviettes de ménage et tous les objets susceptibles de se saturer en eau, ne peuvent pas être lavés au lave-vai
Mode d'emploi – les récipients tels que tasses, verres, casseroles, etc., soient disposés avec l’ouverture vers le bas, afin que l’eau puisse s’écouler facilement – la vaisselle et les couverts ne s’enchevêtrent ou ne s’imbriquent pas les uns dans les autres – les verres ne se touchent pas afin d’éviter les bris de verre et la formation des taches de contact qui peuvent se produire au séchage – placer les petits objets (p. ex.
Mode d'emploi Disposer dans le panier à couverts les fourchettes et les cuillères qui n'ont pas place dans le tiroir à couverts . Afin que l'eau de lavage asperge toutes les pièces dans le panier à couverts, vous devriez insérer 0 1. l'élément grille sur le panier à couverts 2. disposer les fourchettes et les cuillères avec le manche vers le bas dans l'élément grille du panier à couverts. 3. Pour les couverts de grande taille tels que p. ex. fouet, on peut enlever une partie de la grille à couverts.
Mode d'emploi Disposer de la vaisselle (casseroles, grandes assietes) Placez les grandes pièces de vaisselle très sales dans le panier inférieur (Assiettes jusqu’à un diamètre de 29 cm).
Mode d'emploi Variante 3 : le support à assiettes sur la droite du panier inférieur est rabattable en croisant les rayonnages 3 Afin de placer plus facilement les récipients les plus grands, les deux rayonnages du support à assiettes sur la droite du panier inférieur sont rabattables en se croisant.
Mode d'emploi Disposition de la vaisselle (tasses, verres, …) Placez les petites pièces de vaisselle, fragiles et les longs couverts dans le panier supérieur. • Disposez les pièces de vaisselle en quinconce sur les supports à tasses amovibles et en dessous de ceux-ci afin que l’eau de lavage atteigne toutes les pièces de vaisselle. • Pour les pièces de vaisselle hautes, rabattez les supports à tasses.
Mode d'emploi Réglage en hauteur du panier supérieur Hauteur maximale de la vaisselle dans le panier supérieur le panier inférieur 3 avec le panier supérieur soulevé 22 cm 31 cm avec le panier supérieur abaissé 24 cm 29 cm Le réglage en hauteur est également possible panier chargé. Mise en position basse du panier supérieur: 0 1. Sortez entièrement le panier supérieur. 2. Soulevez le panier supérieur à l’aide de la poignée jusqu'à la butée et laissez-le descendre verticalement.
Mode d'emploi Dosage des produits de lavage 1 N’utilisez des produits de lavage pour lave-vaisselle. Dosez le produit de lavage: – Avant le début d’un programme (pas pendant un programme de prérinçage). Le produit de lavage est automatiquement ajouté pendant le programme. Observez les indications concernant le dosage et la conservation sur l’emballage du produit de lavage. Le réservoir pour le produit de lavage se trouve à l’intérieur de la porte. 0 1.
Mode d'emploi L’utilisation de tablettes de lavage combinées. Remarques importantes Il existe également des tablettes de lavage, qui combinent les fonctions de produit de lavage, de lustrant et de sel régénérant. 0 1. Si vous utilisez ce type de produit de lavage, vous devrez d’abord vérifier que la dureté de l’eau correspond avec les indications reprises sur l’emballage et/ou que le produit convient bien à ce type d’application. 2.
Mode d'emploi Produits de lavage concentrés Les produits de lavage pour machines sont à classer en deux catégories en fonction de leur composition chimique: – les produits alcalins classiques avec des composants détersifs – les produits concentrés légèrement alcalins avec des enzymes naturelles 2 L’utilisation de programmes lave-vaisselle à une température de 50 °C et des produits de lavage concentrés est écologique et prolonge la durée de vie des services du fait que les programmes à 50 °C ont été spéci
Mode d'emploi Programmes de lavage Automatiques Pour les programmes de lavage AUTOMATIQUES, on utilise la turbidité de l'eau de lavage pour déterminer dans quelle mesure la vaisselle est sale. A faible chargement de vaisselle peu sale, les étapes de programme «Prélavage», «Lavage» et «Rinçage intermédiaire» durent moins longtemps et la consommation d'eau est moindre.
Mode d'emploi Sélectionner le programme de lavage (tableau des programmes) Sélectionnez le programme de lavage approprié à l'aide de ce tableau: 1) Type de vaisselle plus Type de salissures Programme de lavage approprié: Déroulement de programme 2) Données de consommati on: 3) Service de table et plats - - • très sale • très sale • restes séchés d'aliments, en particulier blanc d'œuf et amidon ò ò Service à café et à dessert - avec des verres fragiles • moyenne• moyennement ment sale sale • reste
Mode d'emploi 5) Lorsque le niveau de dureté est réglé électroniquement á 10, le temps de parcours du programme peut se prolonger quelque peu. Démarrer le programme de lavage 0 1. Vérifier que la vaisselle et les couverts sont disposés correctement de façon à permettre aux bras de lavage de tourner librement. 2. Ouvrir complètement le robinet d’arrivée d'eau. 3. Fermer la porte. 4. Appuyer sur la touche MARCHE/ARRET. Le voyant correspondant s´allume. 5.
Mode d'emploi 0 1. Maintenir la touche du nouveau programme de lavage sélectionné enfoncée. Le voyant du programme de lavage en cours clignote. Après quelques secondes, seul le voyant du nouveau programme de lavage reste allumé. 2. Relâcher la touche. Le nouveau programme de lavage sélectionné démarre. Interruption du programme de lavage en ouvrant la porte du lavevaisselle. L'ouverture de la porte peut provoquer un dégagement de vapeur chaude.
Mode d'emploi Régler ou modifier le départ différé Le départ différé vous permet de régler le moment de démarrage d'un programme de rinçage dans les 19 heures à venir. Régler le départ différé : 0 1. Appuyer sur la touche MARCHE/ARRET 2. Appuyer plusieurs fois sur la touche Départ différé Y jusqu'à ce que le nombre d'heures de démarrage du programme de rinçage clignote sur l'indicateur multifonctions. 3. Appuyer sur la touche du programme de rinçage désiré.
Mode d'emploi Reconnaissance de charge – AUTOMATIC Lorsqu’un programme de lavage démarre bien que le panier supérieur et/ou le panier inférieur ne soient que partiellement chargés, la haute technologie électronique équipant cet appareil adapte la quantité d’eau de lavage ainsi que la durée du programme de lavage à la quantité de vaisselle. De la sorte, il est possible de laver également une petite quantité de vaisselle rapidement et économiquement.
Mode d'emploi Nettoyage du filtre Les filtres sont situés au fond de la cuve. Ils doivent être nettoyés très régulièrement. Des filtres non nettoyés nuisent au résultat de lavage. 0 1. Ouvrez la porte, sortez le panier inférieur. 2. Le système de filtrage du lave-vaisselle se compose d’un filtre mixte grossier/fin, d’un microfiltre et d’un filtre plat. 3. Tournez la poignée de l’ensemble filtre mixte grossier/fin et microfiltre d’¼ de tour vers la gauche puis soulevez le tout. 4.
Mode d'emploi Que faire quand... Si vous constatez une anomalie dans le lavage ou le fonctionnement de votre appareil, consultez les indications données dans cette notice d’utilisation avant de faire appel au Service Après Vente. Dans la majorité des cas, vous pourrez y remédier vous-même. ...les messages d'erreur sont indiqués.
Mode d'emploi Après avoir corrigé l'erreur Å 10 ou Å 20, appuyer sur le bouton du programme de rinçage entamé. Le programme de rinçage se poursuit. Si l'erreur s'indique à nouveau, avertissez s.v.p. le service après vente. 3 Pour toutes les autres erreurs qui s'affichent, avertissez s.v.p. le service après vente en précisant le libellé de l'erreur. (Voir chapitre Service Après Vente) ...il y a des problèmes lors du fonctionnement du lavevaisselle.
Mode d'emploi ...le résultat de lavage n’est pas satisfaisant. La vaisselle n’est pas propre. – Le programme sélectionné ne convient pas au type de salissure sur la vaisselle. – La vaisselle n’est pas correctement placée. Les paniers à vaisselle ne peuvent pas être surchargés. – Les filtres ne sont pas propres ou sont mal placés. – Le produit de lavage n’est pas correctement dosé ou ne convient pas au lavage en lave-vaisselle.
Mode d'emploi Caractéristiques techniques Capacité: 12 couverts normalisés y compris vaisselle de service Pression d’eau autorisée: 1-10 bar (=10-100 N/cm2 = 0.1-1.0 MPa) Raccordement électrique: Les informations concernant le raccordement électrique se trouvent sur la plaque signalétique placée sur le côté droit de la porte du lave-vaisselle. Lave-vaisselle: «pose-libres» Dimensions: 850 x 600 x 600 (H x L x P en mm) poids max.
Mode d'emploi Indications à l'attention des instituts d'essai L'essai selon la norme EN 60704 doit être effectué à pleine charge avec le programme de test (voir tableau des programmes). Les essais selon la norme EN 50242 doivent être effectués avec le bac à sel de l'adoucisseur d'eau plein, avec le bac d'alimentation du produit de rinçage plein et avec le programme de test (voir tableau des programmes).
Instructions de montage et de raccordement INSTRUCTIONS DE MONTAGE GE ET DE RACCORDEMENT Installation du lave-vaisselle • Le lave-vaisselle doit bien reposer sur le sol et être mis à niveau sur un sol bien stable.
Instructions de montage et de raccordement Lave-vaisselle intégrable (voir gabarit de montage en annexe) 3 On peut garnir la porte de l'appareil à l'aide d'une porte du meuble cuisine aux dimensions suivantes: Largeur: 591 – 594 mm Epaisseur: 16 – 24 mm Hauteur: (variable) dépend de – la hauteur de niche – la hauteur du socle – L'adaptation au tracé des joints des meubles adjacents La hauteur exacte doit être mesurée sur place par rapport aux meubles adjacents. Poids: max.
Instructions de montage et de raccordement Raccordement du lave-vaisselle Arrivée d'eau Le lave-vaisselle possède des dispositifs de sécurité qui empêchent le reflux de l'eau de lavage dans le réseau de distribution d'eau potable et sont conformes aux prescriptions de sécurité en vigueur en matière de sécurité hydraulique. • Le lave-vaisselle peut être alimenté en eau froide et en eau chaude jusqu'à 60 °C max. • Le lave-vaisselle ne peut pas être raccordé à un chauffe-eau.
Instructions de montage et de raccordement 3 Le chapitre suivant concerne uniquement les lave-vaisselle qui ont un clapet de sécurité au raccord vissé au niveau du robinet d’eau : Tuyau d’alimentation avec clapet de sécurité Après avoir raccordé le tuyau d’alimentation à double conduit, le clapet de sécurité se situe directement au contact du robinet. De ce fait, le tuyau d’alimentation n’est sous pression que pendant l’alimentation en eau.
Instructions de montage et de raccordement Evacuation de l’eau Tuyau d’évacuation Le tuyau d’évacuation ne peut être ni plié, ni écrasé ni replié sur lui-même. • Raccordement du tuyau d’évacuation: – hauteur maximum: 0,85 mètre. – hauteur minimum nécessaire, 40 cm. Tuyaux de prolongement • Les tuyaux de prolongement sont disponibles chez votre magasin vendeur. Le diamètre intérieur des flexibles de prolongement doit être de 19 mm.
Instructions de montage et de raccordement Système de protection contre les fuites d’eau A titre de protection contre les dégâts des eaux, le lave-vaisselle est équipé d’un système de protection contre les fuites d’eau. En cas d’anomalie, la soupape de sécurité dans le tuyau d'alimentation interrompt immédiatement l’arrivée d’eau et la pompe d’évacuation se met en marche. De cette manière, l’eau ne peut ni s’écouler ni déborder.
Instructions de montage et de raccordement Technique de raccordement Les tuyaux d’alimentation en eau et d’évacuation ainsi que le câble d’alimentation électrique se raccordent sur le côté du lave-vaisselle, aucune place n’étant disponible à cet effet à l’arrière de l’appareil.
Service SERVICE au chapitre «Que faire si...» sont rassemblées les sources de panne les plus fréquentes, auxquelles vous pouvez remédier vous-même. Si vous faites malgré tout appel au service après-vente pour un des problèmes mentionnés ou suite à une erreur de manipulation, la visite du technicien de service après-vente ne sera pas gratuite pendant la période de garantie non plus. Si vous ne trouvez pas d’indication pour une panne dans ce mode d’emploi, veuillez vous adresser au service après-vente.
822 960 261 - 00 - 0203