User manual

7
The control indicators have the following meanings:
Prior to Using for the First Time
1. Set the water softener
2. Fill up with dishwasher salt
3. Fill up with rinse aid
3 If you wish to use 3in1 detergent, do the following:
– First read the section “Using 3in1 detergents”.
– Fill the salt container with dishwasher salt.
– Set the softener unit to its lowest setting.
– Deactivate the rinse aid dispenser. For dishwashers where the rinse
aid dispenser cannot be deactivated, set the rinse aid dosage to “I”.
– Before the start of the dishwashing cycle put 3in1 detergent in the
detergent dispenser.
– The drying result may be affected.
1)
1) These control indicators are never illuminated while a dishwashing cycle is running.
Refill with dishwasher salt
1)
Refill with rinse aid