52985 59/2 de-nl 1-12-1999 10:01 Pagina 1 ÖKO_FAVORIT 54700 Geschirrspülautomat Afwasmachine Gebrauchsanweisung Gebruiksaanwijzing
152985 59/2 de-nl 1-12-1999 10:01 Pagina 2 Sehr geehrte Kundin, sehr geehrter Kunde! Lesen Sie bitte diese Benutzerinformation sorgfältig durch. Beachten Sie vor allem die Sicherheitshinweise auf den ersten Seiten dieser Benutzerinformation! Bewahren Sie bitte die Benutzerinformation zum späteren Nachschlagen auf. Geben Sie sie an eventuelle Nachbesitzer des Gerätes weiter.
152985 59/2 de-nl 1-12-1999 10:01 Pagina 3 Inhaltsverzeichnis Gebrauchsanweisung 4 Entsorgung 7 Wirtschaftlich und umweltbewußt spülen 7 Geräteansicht und Bedienblende 8 Vor der ersten Inbetriebnahme Wasserenthärter einstellen Spezialsalz für Wasserenthärter einfüllen Klarspülmittel einfüllen Klarspülerdosierung einstellen 11 11 13 14 15 Im täglichen Gebrauch 16 Besteck und Geschirr einordnen Besteck einordnen Töpfe, Pfannen und große Teller einordnen Tassen, Gläser und Kaffeeservice einordnen
152985 59/2 de-nl 1-12-1999 10:01 Pagina 4 Gebrauchsanweisung Sicherheitshinweise Die Sicherheit von AEG-Elektrogeräten entspricht den anerkannten Regeln der Technik und dem Gerätesicherheitsgesetz. Dennoch sehen wir uns als Hersteller veranlaßt, Sie mit folgenden Sicherheitshinweisen vertraut zu machen: Aufstellung, Anschluß, Inbetriebnahme ● Der Geschirrspüler darf nur stehend transportiert werden. ● Überprüfen Sie den Geschirrspüler auf Transportschäden.
152985 59/2 de-nl 1-12-1999 10:01 Pagina 5 Allgemeine Sicherheit ● Reparaturen am Geschirrspüler dürfen nur von Fachkräften durchgeführt werden. Durch unsachgemäße Reparaturen können erhebliche Gefahren für den Benutzer entstehen. Wenden Sie sich im Reparaturfall an unseren Kundendienst oder an Ihren Fachhändler.
152985 59/2 de-nl 1-12-1999 10:01 Pagina 6 Bestimmungsgemäße Verwendung 6 ● Spülen Sie mit dem Geschirrspüler nur Haushaltsgeschirr. Wird das Gerät zweckentfremdet oder falsch bedient, wird vom Hersteller keine Haftung für eventuelle Schäden übernommen. ● Vergewissern Sie sich vor Verwendung von Spezialsalz, Reinigungs- sowie Klarspülmittel, daß der Hersteller dieser Produkte deren Einsatz in Haushaltsgeschirrspülern ausdrücklich erlaubt. ● Keine Lösungsmittel in den Geschirrspüler geben.
152985 59/2 de-nl 1-12-1999 10:01 Pagina 7 Entsorgung Verpackungmaterial entsorgen Entsorgen Sie das Verpackungsmaterial des Geschirrspülautomaten sachgerecht. Alle verwendeten Verpackungsmaterialien sind umweltverträglich und wiederverwertbar. ● Kunststoffteile sind mit international genormten Abkürzungen gekennzeichnet: - >PE< für Polyethylen, z. B. Verpackungsfolien - >PS< für Polystyrol, z. B. Polsterteile (grundsätzlich FCKW-frei) - >POM< für Polyoxymethylen, z. B.
152985 59/2 de-nl 1-12-1999 10:01 Pagina 8 Geräteansicht und Bedienblende 1. Oberer Sprüharm 2. Salzbehälter 3. Behälter für Reiniger 8 1 4. Bedienblende 5. Behälter für Klarspüler 7 6. Siebe 7. Unterer Sprüharm 2 6 3 5 8. Oberer Korb 4 IN95 Bedienblende 12 8 3 4 5 1. Betriebskontrollampe 3. Programmtasten 2. ElN/AUS-Taste 4.
152985 59/2 de-nl 1-12-1999 10:01 Pagina 9 5. Programmablaufanzeige Wenn ein Programm eingestellt wird, leuchten alle Kontrollampen der dafür vorgesehenen Phasen auf. Nach dem Programmstart leuchtet jeweils die Lampe neben dem Programmschritt, der gerade abläuft. Vorspülen Reinigen Spülen Trocknen 6. Signalanzeigen Die Signalanzeigen haben folgende Bedeutung: SALZ Spezialsalz nachfüllen. KLARSPÜLER Klarspüler nachfüllen.
152985 59/2 de-nl 1-12-1999 10:01 Pagina 10 Um die verschiedenen Vorgänge der Geschirrspülmaschine zu verdeutlichen, sind Signaltöne vorgesehen. Kurzer Signalton "Befehl angenommen" Wenn eine Taste gedrückt wird, ertönt ein kurzes Tonsignal, der anzeigt, daß der Befehl angenommen ist. Langer Signalton "Programm wird ausgeführt" Ein langer Signalton bedeutet, daß das Programm gestartet wird.
152985 59/2 de-nl 1-12-1999 10:01 Pagina 11 Vor der ersten Inbetriebnahme Nachdem der Geschirrspüler korrekt aufgestellt und installiert wurde, müssen Sie ihn zuerst betriebsbereit machen. Führen Sie vor der ersten Inbetriebnahme folgende Schritte durch: - Transportsicherung entfernen; - Wasserenthärter einstellen; - Spezialsalz für Wasserenthärter einfüllen; - Klarspüler einfüllen. Ausführliche Informationen zu den einzelnen Punkten finden Sie in den nachfolgenden Kapiteln.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 12 Wenn Sie den Geschirrspüler auf eine andere Stufe einstellen möchten, gehen Sie wie folgt vor: Die Geschirrspülmaschine muß zur Einstellung bereit sein. 1. Die "INTENSIV 70°"- und "NORMAL 65°"- Programmtasten drücken, gedrückt halten und gleichzeitig die EIN/AUS-Taste drücken. 2. Die "INTENSIV 70°"- und "NORMAL 65°"- Programmtasten weiterhin gedrückt halten und ungefähr 5 Sekunden abwarten.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 13 Spezialsalz für Wasserenthärter einfüllen Verwenden Sie nur Spezialsalz für Geschirrspüler. Füllen Sie niemals andere salzarten (z.B. Speisesalz) oder Geschirrspülreiniger in den Salzvorratsbehälter. Dies würde den Wasserenthärter zerstören. Überzeugen Sie sich vor jedem Salzeinfüllen, daß Sie wirklich eine Packung Spezialsalz in der Hand haben. Füllen Sie Spezialsalz ein: - Vor der ersten Inbetriebnahme des Geschirrspülers.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 14 5. Öffnung des Vorratsbehälters von Salzresten säubern. 6. Verschlußkappe im Uhrzeigersinn bis zum Anschlag zudrehen sonst gelangt Spezialsalz ins Spülwasser. Trübe Gläser könnten die Folge sein. 7. Wenn Sie nicht unmittelbar nach dem Salzeinfüllen Ihr Geschirr spülen sollten Sie das Programm VORSPÜLEN laufen lassen. dadurch werden übergelaufenes Salzwasser und Salzkörner ausgespült.
2985 59/2 de-nl 1-12-1999 10:02 Pagina 15 1. Tür öffnen. 2. Deckel des Vorratsbehälters um 1/4 Umdrehung entgegen dem Uhrzeigersinn drehen und abnehmen. 3. Klarspüler einfüllen; maximal bis zur gestrichelten Linie, das entspricht einer Füllmenge von ca. 150 ml. A BR01 4. Deckel wieder einsetzen und im Uhrzeigersinn festdrehen. B m a x 6 5 4 3 2 1 5. Wenn Klarspüler danebengelaufen ist, mit einem Lappen wegwischen. Sonst bildet sich beim Spülen zuviel Schaum.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 16 Im täglichen Gebrauch ● ● ● ● ● Muß Spezialsalz oder Klarspüler nachgefüllt werden? Besteck und Geschirr in Geschirrspüler einordnen Reinigungsmittel für Geschirrspüler einfüllen Für Besteck und Geschirr geeignetes Spülprogramm auswählen Spülprogramm starten Besteck und Geschirr einordnen Schwämme, Haushaltstücher und alle Gegenstände, die sich mit Wasser vollsaugen können, dürfen nicht im Geschirrspüler gereinigt werden.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 17 - Hohlgefäße wie Tassen, Gläser, Töpfe usw. mit der Öffnung nach unten einordnen, damit sich in Mulden oder tiefen Böden kein Wasser ansammeln kann - Geschirr und Besteckteile dürfen nicht ineinander liegen oder sich gegenseitig abdecken - um Glasschäden zu vermeiden, dürfen Gläser sich nicht berühren - kleine Gegenstände (z.B.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 18 Töpfe, Pfannen und große Teller einordnen Größeres und stark verschmutztes Geschirr im Unterkorb einordnen. Um größeres Geschirr leichter einordnen zu können, ist es möglich, die beiden rückwärtigen Tellerhalten leicht und rasch umzuklappen. UI12 Tellerhalten leicht anheben und nach hinten klappen. UI18 Tassen, Gläser und Kaffeeservice einordnen Kleineres, empfindliches Geschirr und lange, spitze Besteckteile im Oberkorb einordnen.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 19 Oberkorb in der Höhe verstellen Maximale Höhe des Geschirrs im Oberkorb Unterkorb bei hochgestelltem Oberkorb 20 cm 31 cm bei normalgestelltem Oberkorb 24 cm 27 cm 1. Oberkorb bis zum Anschlag herausziehen. A 2. Die vorderen Arretierungen (A) zur Seite klappen. 3. Oberkorb aus den Schienen herausziehen. 4. Oberkorb mit den unteren Rollen in die Schienen einschieben. RC01 5. Arretierungen wieder nach vorne klappen.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 20 Reinigungsmittel einfüllen Verwenden Sie nur Reinigungsmittel für Geschirrspüler. Füllen Sie Reinigungsmittel ein: - Vor Beginn eines Spülprogramms (nicht beim Programm Vorspülen). Das Reinigungsmittel wird während des Programms ins Spülwasser abgegeben. Beachten Sie bitte die Dosier- und Lagerempfehlungen der Hersteller auf den Verpackungen der Reinigungsmittel. Der Behälter für Reinigungsmittel ist auf der Innenseite der Tür. 1.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 21 Spülprogramme mit Biophase und Kompaktreiniger Reinigungsmittel für Geschirrspüler lassen sich anhand ihrer chemischen Zusammensetzung in zwei Grundtypen einteilen: - herkömmliche, alkalische Reiniger mit ätzenden Bestandteilen - niederalkalische Kompaktreiniger mit natürlichen Enzymen.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 22 Programm auswählen (Programmtabelle) Programm INTENSIV 70° * 22 Art und Ausmaß der Verschmutzung Stark verschmutztes Geschirr mit anhaftenden, vorwiegend stärkehaltigen Speiseresten (z.B. Nudeln, Reis, Grieß, Kartoffeln, Eier, Soße, Bratfleisch). Geschirrart Zu drückende Tasten EIN AUS Töpfe und verschiedenartiges Geschirr NORMAL 65° Normal verschmutztes Geschirr mit anhaftenden, vorwiegend stärkehaltigen Speiseresten (z.B.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 23 Verbrauchswerte Programmbeschreibung ** Programmdauer in Minuten Stromverbrauch in kWh Wasserverbrauch in Liter Vorspülen 55°C Hauptspülen 70°C 2 Klarspülgange kalt 1 Klarspülgang 65°C Trocknung 105 ÷ 115 1,4 18 Vorspülen 40°C Hauptspülen 65°C 1 Klarspülgang kalt 1 Klarspülgang 65°C Trocknung 90 ÷ 100 1,2 15 Vorspülen kalt Hauptspülen 50°C 1 Klarspülgang kalt 1 Klarspülgang 60°C Trocknung 135 ÷ 145 0,8 14 Hauptspülen 50°C 1 Klarspülgang kalt 1 Kl
152985 59/2 de-nl 1-12-1999 10:02 Pagina 24 Starten des Spülprogramms 1. Überprüfen Sie, ob Geschirr und Besteck im Geschirrspüler so eingeordnet sind, daß die Sprüharme sich frei drehen können. 2. Wasserhahn ganz aufdrehen. 3. EIN/AUS-Taste drücken. 4. Die gewünschte Programmtaste drücken; die für diesen Zyklus vorgesehenen Programmablaufanzeiger leuchten auf. 5. Die Türklappe schließen. Das eingestellte Programm wird nach 5 Sekunden gestartet.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 25 Geschirrspüler ausschalten Geschirrspüler erst ausschalten, wenn die Programmablaufanzeige erlischt. 1. EIN/AUS-Taste drücken. Anzeige der EIN/AUS-Taste erlischt. Beim Öffnen der Tür, unmittelbar nach Programmende, kann heißer Dampf austreten. 2. Tür vorsichtig öffnen. Geschirr ausräumen ● Heißes Geschirr ist stoßempfindlich. Geschirr dashalb vor dem Ausräumen abkühlen lassen.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 26 Pflege und Reinigung Auf keinen Fall handelsübliche Möbelpflege- oder aggressive Reinigungsmittel verwenden. ● Bedienteile des Geschirrspülers bei Bedarf nur mit einem weichen Lappen und warmem, klarem Wasser reinigen. ● Sprüharme brauchen nicht gereinigt zu werden. ● Innenbehälter, Türdichtung und Wasserzulauf gelegentlich auf Verschmutzungen kontrollieren und gegebenfalls reinigen.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 27 7. Flächensieb wieder in den Spülraumboden einsetzen. 8. Grob-/Feinsieb in den Mikrofilter einsetzen und zusammenstecken. 9. Siebkombination einsetzen und durch Schwenken des Griffs im Uhrzeigersinn bis zum Anschlag verriegeln. Darauf achten, daß das Flächensieb nicht über den Spülraumboden heraussteht. Ohne Siebe darf keinen Fall gespült werden.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 28 Was tun, wenn... Versuchen Sie mit Hilfe der hier aufgeführten Hinweise kleinere Störungen am Geschirrspüler selbst zu beheben. Wenn Sie bei einer der hier aufgeführten Störungen oder zu Behebung eines Bedienfehlers den Kundendienst in Anspruch nehmen, erfolgt der Besuch des KundendienstTechnikers auch während der Garantiezeit nicht kostenlos. ...
152985 59/2 de-nl 1-12-1999 10:02 Pagina 29 ...es Probleme beim Betrieb des Geschirrspülers gibt. Störung Die Maschine startet nicht Größere Lärmentwicklung während des Betriebs Mögliche Ursache Abhilfe Die Gerätetür ist nicht richtig geschlossen. Schließen Sie die Tür. Der Stecker ist nicht korrekt in der Steckdose eingesteckt. Stecker richtig einstecken. Das Gerät ist nicht eingeschaltet. Gerät einschalten. Keine Spannung an der Steckdose vorhanden. Sicherung prüfen.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 30 ...das Spülergebnis nicht zufriedenstellend ist. Das Geschirr wird nicht sauber - Es wurde nicht das richtige Spülprogramme gewählt. - Geschirr war so eingeordnet, daß das Spülwasser nicht alle teile erreicht hat. Die Geschirrkörbe dürfen nicht überladen sein. - Siebe im Spülraumboden sind nicht sauber oder falsch eingesetzt. - Es wurde kein Marken-Reinigungsmittel verwendet oder zu wenig dosiert.
152985 59/2 de-nl 1-12-1999 10:02 Pagina 31 Technische Daten Abmessungen Breite Höhe mit Arbeitsplatte Höhe ohne Arbeitsplatte max. Tiefe max. Tiefe bei geöffneter Türe Betriebsspannung/Frequenz Leistungsaufnahme Umwälzpumpe Leistungsaufnahme Heizelement Gesamtleistung Leitungswasserdruck Fassungsvermögen 45 cm 85 cm 82 cm 60 cm 115,2 cm 230 V - 50 Hz 200 W 2100 W 2300 W min. max. 50 kPa (0.5 bar) 800 kPa (8 bar) 9 Maßgedecke Dieses Gerät entspricht den folgenden EG Richtlinien: - 73/23/EWG vom 19.
152985 59/2 de-nl 1-12-1999 10:03 Pagina 32 Hinweise für Prüfinstitute Prüfnorm EN 50242 Vergleichsprogramme: - Energie Spar 50° Fassungsvermögen 9 Maßgedecke einschl.
152985 59/2 de-nl 1-12-1999 10:03 Pagina 33 Kundendienst Im Kapitel "Abhilfe bei Störungen" sind die wichtigsten Fehlerquellen zusammengestellt, die Sie selbst beheben können. Wenn Sie trotzdem für einen der aufgeführten Hinweise oder aufgrund von Fehlbedienung den Kundendienst in Anspruch nehmen, so erfolgt der Besuch des Kundendienst-Technikers auch während der Garantiezeit nicht kostenlos.
152985 59/2 de-nl 1-12-1999 10:03 Pagina 34 Aufstell- und Anschlußanweisung Aufstellen des Geschirrspülers Stellen Sie die Maschine möglichst in der Nähe eines Wasserhahns und eines Ablaufanschlusses auf. Um ein einwandfries Schließen und Abdichtung der Tür zu erhalten, muß die Maschine fest und waagerecht auf dem Boden stehen. Hierzu verstellen Sie die Schraubfüße, bis die Maschine waagerecht steht.
152985 59/2 de-nl 1-12-1999 10:03 Pagina 35 Anschließen des Geschirrspülers Wasseranschluß Der Geschirrspüler hat Sicherheitseinrichtungen, die den Rückfluß von Spülwasser in das Trinkwasser-Leitungsnetz verhindern und den geltenden wassertechnischen Sicherheitsvorschriften entsprechen. Der Geschirrspüler kann an Kaltwasser und an Warmwasser bis max. 60°C angeschlossen werden. ● Der Geschirrspüler darf nicht an offene Warmwassergeräte und Durchlauferhitzer angeschlossen werden.
152985 59/2 de-nl 1-12-1999 10:03 Pagina 36 Wasserablauf Ablaufschlauch Der Ablaufschlauch darf nicht geknickt, gequetscht oder in sich verschlungen sein. ● Anschluß des Ablaufschlauches: -maximal zulässige Höhe: 1 Meter. -minimal erforderliche Höhe 30 cm über der Geräteunterkante. Verlängerungsschläuche ● Verlängerungsschläuche sind über den Fachhandel oder unseren Kundendienst zu beziehen. Der Innendurchmesser der Verlängerungsschläuche muß 19 mm betragen, damit die Gerätefunktion nicht gestört wird.
152985 59/2 de-nl 1-12-1999 10:03 Pagina 37 Wasserschutzsystem Zum Schutz gegen Wasserschäden ist der Geschirrspüler mit einem Wasserschutzsystem ausgestattet. An der Bodenwanne diese Vorrichtung schaltet die Wasserzufuhr bei einer Undichtheit innerhalb des Gerätes ab. Die Schutzvorrichtung ist nur im eingeschalteten Zustand aktiv. ● Schaltet die Sicherheitsvorrichtung ein, die Spülen-Kontrollampe blinkt. In diesem Fall schließen Sie den Wasserhahn und rufen Sie den Kundendienst.
152985 59/2 de-nl 1-12-1999 10:03 Pagina 38 Elektrischer Anschluß Gemäß den technischen Anschlußbedingungen der Elektrizitätsunternehmen darf ein Festanschluß an das elektrische Netz nur von einem zugelassenen Elektroinstallateur durchgeführt werden. Achten Sie beim Anschluß auf die VDE-Bestimmungen und gegebenenfalls auf die Zusatzbestimmungen der örtlichen Elektrizitätswerke.
152985 59/2 de-nl 1-12-1999 10:04 Pagina 76 AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.