FAVORIT 60830 Lave-vaisselle Informations pour les utilisateurs
Chère cliente, cher client, veuillez lire avec soin ces informations pour les utilisateurs. Tenez surtout compte de la section “Sécurité” des premières pages de ces informations pour les utilisateurs! Conservez ces informations aux utilisateurs pour un usage ultérieur. Transmettez-les à un éventuel possesseur ultérieur de la machine.
Sommaire SOMMAIRE Mode d'emploi ............................................. 5 Consignes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Protection de l’environnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Laver la vaisselle de manière économique et ménageant l’environnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Vue de l'appareil et bandeau de commande . . . . . . . . . . . . . . . . .
Sommaire Fin de programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Retrait de la vaisselle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Entretien et nettoyage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Nettoyage du filtre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Que faire quand... . . . . . . . . . . . . . . . . . . . . . . . .
Mode d'emploi MODE D'EMPLOI 1 Consignes de sécurité La sécurité des appareils électroménagers AEG est conforme aux règles reconnues de la technique et à la législation portant sur la sécurité des appareils. En tant que fabricant, nous attirons cependant votre attention sur les indications supplémentaires suivantes: Installation, raccordement, mise en service • Le lave-vaisselle peut uniquement être transporté debout. • Contrôlez le lave-vaisselle pour dégâts de transport éventuels.
Mode d'emploi • Lors de la mise au rebut du lave-vaisselle: coupez le câble d'alimentation au ras de l'appareil et jetez-le. Neutralisez le dispositif de fermeture de porte, de façon à ce que la porte ne ferme plus. Sécurité générale • Les réparations sur le lave-vaisselle peuvent uniquement être effectuées par du personnel qualifié. Les réparations non effectuées dans les règles peuvent être la source de dangers importants pour l'utilisateur.
Mode d'emploi • Le système de protection contre les fuites d'eau protège de manière fiable contre les dégâts des eaux. Les conditions suivantes doivent cependant être remplies à cet effet: – L'appareil doit également rester raccordé à l'alimentation électrique lorsqu'il n'est pas en service. – Le lave-vaisselle doit être installé correctement. – Fermez toujours le robinet d'arrivée d'eau lorsque le lave-vaisselle n'est pas utilisé pendant une période prolongée, p. ex. durant un voyage de vacances.
Mode d'emploi 2 Laver la vaisselle de manière économique et ménageant l’environnement • Ne raccordez le lave-vaisselle à une alimentation en eau chaude que si vous disposez d’une installation d’eau chaude qui ne chauffe pas à l’électricité. • Réglez correctement l’adoucisseur. • Ne rincez pas préalablement la vaisselle à l’eau courante.
Mode d'emploi Vue de l'appareil et bandeau de commande Bras de lavage supérieur Joint en caoutchouc pour couplage de la tuyauterie d'arrivée d'eau au bras de lavage Bras de lavage Commutateur de plage de dureté Réservoir pour sel régénérant Réservoir de produit de lavage Réservoir pour produit de rinçage Plaque signalétique Filtres 9
Mode d'emploi Bandeau de commande Touches de fonction 1 3 2 4 Touches de fonction Poignée de la porte Départ différé Voyants Fenêtre Zone de commande d’affichage La zone de commande se compose de la touche MARCHE/ARRET M et des touches de programme avec leurs voyants.
Mode d'emploi Les voyants ont la signification suivante: 3 J Remplir le réservoir de sel régénérant H Remplir le réservoir de produit de rinçage ^ Ouvrir le robinet d'eau [ Nettoyer le système de filtration du lave-vaisselle Le voyant [ doit vous rappeler de contrôler à l'occasion les filtres du lave-vaisselle et, si nécessaire, de les nettoyer. Il s'allume à intervalles réguliers, indépendamment de l'état d'encrassement des filtres.
Mode d'emploi Adoucisseur d'eau Suivant les localités, l’eau contient une quantité variable de sels calcaires et minéraux. Ceux-ci se déposent sur la vaisselle laissant des taches et des dépôts blanchâtres. Plus la teneur en sels est élevée et plus l’eau est « dure ». Le lave vaisselle est muni d’un adoucisseur et, utilisant du sel régénérant spécial pour lave vaisselle, il fournit une eau dépourvue de calcaire (adoucie) pour opérations de lavage.
Mode d'emploi Réglage de l'adoucisseur d'eau 0 Régler l´adoucisseur d´eau conformément au tableau en fonction de la dureté de l´eau de votre région. Le lave-vaisselle doit être désactivé. Réglage manuel : 1. Ouvrir la porte du lave-vaisselle. 2. Retirez le panier inférieur du lavevaisselle. 3. Positionnez le sélecteur de dureté sur 0 ou sur 1 (voir tableau). 4. Replacez le panier inférieur. Réglage automatique : 1. Appuyez sur la touche MARCHE/ ARRET. Le voyant correspondant s´allume.
Mode d'emploi Le sel régénérant 3 Si la dureté de votre eau correspond aux degrés de niveau 1, il n’est pas nécessaire d’utiliser du sel régénérant car elle est déjà douce. Il existe 2 façons différentes d’utiliser le sel régénérant : • Si vous utilisez du produit de lavage pour lave vaisselle qui contient du sel celui-ci doit être déposé dans le réservoir du produit de lavage. – Dans ce cas, l’adoucisseur d’eau doit être réglé manuellement sur 0 et automatiquement sur 1.
Mode d'emploi Remplissage du réservoir de sel régénérant Si vous utilisez séparément un produit de lavage et du sel régénérant, versez le sel spécifique : – Avant la première utilisation du lave-vaisselle. – Quand le voyant de contrôle J s'allume sur le bandeau de commande. 0 1. Ouvrez la porte, retirez le panier inférieur. LE SA ALT Z 2. Dévissez et ôtez le bouchon du réserS AL S EL voir de sel. S 3. Uniquement lors de la première utilisation: Remplissez entièrement d’eau le réservoir de sel. 4.
Mode d'emploi Le produit de rinçage Ce produit évite que l’eau ne reste sur la vaisselle sous forme de gouttelettes laissant des taches blanches après séchage. Il existe deux façons différentes d’utiliser le produit de rinçage : • Si vous utilisez un produit de lavage contenant déjà un produit de rinçage, versez-le dans le distributeur de produit de lavage. – Dans ce cas, le distributeur de produit de rinçage doit être désactivé.
Mode d'emploi La fenêtre d’affichage indique le réglage en cours : 0d Le distributeur de produit de rinçage est désactivé 1d Le distributeur de produit de rinçage est activé (préréglage en usine) 4. Une pression sur la touche de fonction 2 active ou désactive le distributeur de produit de rinçage. 5. Dès que la fenêtre d’affichage indique le réglage désiré, appuyez sur la touche MARCHE/ARRET.
Mode d'emploi 4. Versez le produit de rinçage dans l’orifice de remplissage sans dépasser le repère maximum (ligne en pointillé) qui correspond à une quantité maximale de remplissage d'env. 140 ml. 5. Refermez le couvercle et appuyez dessus jusqu'au verrouillage. Epongez soigneusement tout débordement pour éviter une formation excessive de mousse lors d’un futur lavage. Utilisez uniquement du produit de rinçage spécial lave-vaisselle. Tout autre produit risque d’endommager votre appareil.
Mode d'emploi Utilisation journalière • Faut-il compléter le sel régénérant ou le produit de rinçage? • Disposez les couverts et la vaisselle dans le lave-vaisselle • Remplissez le réservoir de produit de lavage pour lave-vaisselle • Sélectionnez un programme de lavage convenant aux couverts et à la vaisselle • Lancez le programme de lavage Disposez les couverts et la vaisselle 1 Les éponges, serviettes de ménage et tous les objets susceptibles de se saturer en eau, ne peuvent pas être lavés au lave-vai
Mode d'emploi – la vaisselle et les couverts ne s’enchevêtrent ou ne s’imbriquent pas les uns dans les autres – les verres ne se touchent pas afin d’éviter les bris de verre et la formation des taches de contact qui peuvent se produire au séchage – placer les petits objets (p. ex.
Mode d'emploi Disposer dans le panier à couverts les fourchettes et les cuillères qui n'ont pas place dans le tiroir à couverts . Afin que l'eau de lavage asperge toutes les pièces dans le panier à couverts, vous devriez insérer 0 1. l'élément grille sur le panier à couverts 2. disposer les fourchettes et les cuillères avec le manche vers le bas dans l'élément grille du panier à couverts. 3. Pour les couverts de grande taille tels que p. ex. fouet, on peut enlever une partie de la grille à couverts.
Mode d'emploi Disposer de la vaisselle (casseroles, grandes assietes) Placez les grandes pièces de vaisselle très sales dans le panier inférieur (Assiettes jusqu’à un diamètre de 29 cm).
Mode d'emploi Variante 3 : le support à assiettes sur la droite du panier inférieur est rabattable en croisant les rayonnages 3 Afin de placer plus facilement les récipients les plus grands, les deux rayonnages du support à assiettes sur la droite du panier inférieur sont rabattables en se croisant.
Mode d'emploi Disposition de la vaisselle (tasses, verres, …) Placez les petites pièces de vaisselle, fragiles et les longs couverts dans le panier supérieur. • Disposez les pièces de vaisselle en quinconce sur les supports à tasses amovibles et en dessous de ceux-ci afin que l’eau de lavage atteigne toutes les pièces de vaisselle. • Pour les pièces de vaisselle hautes, rabattez les supports à tasses.
Mode d'emploi Réglage en hauteur du panier supérieur Hauteur maximale de vaisselle dans le panier supérieur le panier inférieur 3 avec le panier supérieur soulevé 22 cm 31 cm avec le panier supérieur abaissé 24 cm 29 cm Le réglage en hauteur est également possible lorsque les paniers sont remplis. Mise en position basse du panier supérieur: 0 1. Sortez entièrement le panier supérieur. 2. Soulevez le panier supérieur jusqu'à la butée et laissez-le descendre verticalement.
Mode d'emploi Remplissage du produit de lavage 1 N’utilisez que des produits de lavage pour des lave-vaisselle ménagers. Le produit de lavage est dangereux! – Le réservoir de produit de lavage doit être rempli avant chaque programme de lavage, à l’exception du programme prélavage. Le produit de lavage est libéré automatiquement au cours du programme de lavage. Veuillez respecter les recommandations de dosage et de stockage du fabricant mentionnées sur les emballages des produits de lavage.
Mode d'emploi Utilisation des tablettes de détergent combinées “3 en 1” Recommandations générales Ces produits sont des tablettes qui combinent les fonctions détergent / aide au rinçage et sel. 0 1. Avant d'utiliser ces produits, vous devriez d'abord vérifier que la dureté de l'eau de votre alimentation en eau est compatible avec l'utilisation de ces produits en vous référant aux instructions fournies par le fabricant du détergent (Voir sur l'emballage). 2.
Mode d'emploi Produits de lavage compacts Les produits de lavage pour lave-vaisselle peuvent se diviser en deux catégories principales selon leur composition chimique: – les produits de lavage alcalins traditionnels, à base de substances corrosives, – les produits de lavage compacts faiblement alcalins, à base d'enzymes naturelles.
Mode d'emploi Programmes de lavage Automatiques Pour les programmes de lavage AUTOMATIQUES, on utilise la turbidité de l'eau de lavage pour déterminer dans quelle mesure la vaisselle est sale. A faible chargement de vaisselle peu sale, les étapes de programme «Prélavage», «Lavage» et «Rinçage intermédiaire» durent moins longtemps et la consommation d'eau est moindre.
Mode d'emploi Sélectionner le programme de lavage (tableau des programmes) Sélectionnez le programme de lavage approprié à l'aide de ce tableau: Type de vaisselle de plus Type de salissures Service de table et plats Récipients Service de table et plats - - - • normalement sale • restes séchés d'aliments • utilisation toute • très sale récente, de moyenne- • restes séchés ment à légèrement d'aliments, en partisale culier blancs d'oeufs et amidon convient particulièrement en cas d'utilisation de dét
Mode d'emploi Type de vaisselle Service de table et plats de plus avec de la vaisselle sensible à la chaleur Type de salissures • normalement sale Programme de lavage approprié: Déroulement de programme 2 Données de consommation: 3 ECO 50° 1 Prélavage Lavage Rinçage intermédiaire Rinçage final Séchage Services à café et à Tous les dessert types de vaisselle avec des verres fragiles • légèrement sale Vaisselle utilisée qui a été rassemblée dans le lave-vaisselle, mais ne doit être lavée qu'à un mo
Mode d'emploi Démarrer le programme de lavage 0 1. Vérifier que la vaisselle et les couverts sont disposés correctement de façon à permettre aux bras de lavage de tourner librement. 2. Ouvrir complètement le robinet d’arrivée d'eau. 3. Fermer la porte. 4. Appuyer sur la touche MARCHE/ARRET. Le voyant correspondant s´allume. 5. Appuyer sur la touche du programme sélectionné (voir « tableau de programmes »). Le voyant correspondant s'allume. La fenêtre d'affichage indique la durée du programme.
Mode d'emploi 2. Relâcher la touche. Le nouveau programme de lavage sélectionné démarre. Interruption du programme de lavage en ouvrant la porte du lavevaisselle. L'ouverture de la porte peut provoquer un dégagement de vapeur chaude. Danger de brûlure par aspersion ! Ouvrir la porte avec précaution. 0 1. Ouvrir la porte du lave-vaisselle. Le programme de lavage s‘interrompt. 2. Fermer la porte. Le programme de lavage se poursuit. 1 Interruption du programme de lavage (RESET) : 0 1.
Mode d'emploi 4. Une pression sur la touche 3 en 1 permet d´activer ou de désactiver la touche complémentaire. Le voyant 3 en 1 affiche le réglage en cours : le voyant 3 en 1 s’allume la fonction complémentaire est activée le voyant 3 en 1 ne s´allume pas la fonction complémentaire est désactivée (Préréglage en usine). 5. Appuyer sur la touche du programme sélectionné (voir “tableau des programmes”). Après 3 secondes environ, le programme sélectionné démarre.
Mode d'emploi Modifier le départ différé : Tant que le programme de lavage n'a pas démarré, vous pouvez encore modifier la sélection du programme de lavage en appuyant sur la touche de programme correspondant. Annuler la sélection du départ différé : Tant que le programme de lavage n'a pas démarré, vous pouvez encore annuler la sélection du départ différé. Appuyez sur la touche DEPART DIFFERE jusqu'à ce que la durée du programme de lavage sélectionné apparaisse dans la fenêtre d’affichage.
Mode d'emploi Fin de programme Lorsque à la fin du programme, la fenêtre d’affichage indique «0». 0 1. Appuyez sur la touche MARCHE/ARRET. Le voyant MARCHE/ARRET s’éteint. A la fin du programme, de la vapeur brûlante peut s’échapper à l’ouverture de la porte. Aussi: 2. Ouvrez la porte avec précaution. 1 Retrait de la vaisselle 3 • Ouvrez la porte et attendez 15 minutes avant de sortir la vaisselle: vous éviterez de vous brûler et vous obtiendrez de meilleurs résultats de séchage.
Mode d'emploi Nettoyage du filtre Les filtres sont situés au fond de la cuve. Ils doivent être nettoyés très régulièrement. Des filtres non nettoyés nuisent au résultat de lavage. 0 1. Ouvrez la porte, sortez le panier inférieur. 2. Le système de filtrage du lave-vaisselle se compose d’un filtre mixte grossier/fin, d’un microfiltre et d’un filtre plat. 3. Tournez la poignée de l’ensemble filtre mixte grossier/fin et microfiltre d’¼ de tour vers la gauche puis soulevez le tout. 4.
Mode d'emploi Que faire quand... Si vous constatez une anomalie dans le lavage ou le fonctionnement de votre appareil, consultez les indications données dans cette notice d’utilisation avant de faire appel au Service Après Vente. Dans la majorité des cas, vous pourrez y remédier vous-même. ...
Mode d'emploi Symptôme Cause possible Solution La fenêtre d’affichage indique Le système anti-inondation est activé. le code d‘erreurÅ 30. Fermer le robinet d’arrivée d'eau et contacter le service après vente. Le voyant \ rappelle seulement que les filtres du lave-vaisselle doivent être contrôlés et nettoyés régulièrement. Il s'allume à intervalles réguliers indépendamment de l‘état de propreté des filtres. Le voyant s´éteint automatiquement lors du démarrage du programme de lavage suivant.
Mode d'emploi ...il y a des problèmes lors du fonctionnement du lavevaisselle. Symptômes Cause possible La porte du lave-vaisselle n’est pas correctement fermée. Solutions Refermez la porte. L’appareil n’est pas correcteBranchez la prise. ment branché. Le programme ne démarre pas. Le fusible de l’installation électrique de la maison n’est Remplacez le fusible pas en bon état. Un départ différé a été programmé (selon modèle). Des taches de rouille sont visibles à l’intérieur de la cuve.
Mode d'emploi La vaisselle ne sèche pas ou ne brille pas. – La vaisselle est restée trop longtemps dans l’appareil. – Le réservoir pour le liquide de rinçage est vide. Les verres présentent des stries, des taches blanchâtres ou un dépôt aux reflets bleus. – Dosez correctement la quantité de produit de rinçage. Les verres présentent des taches d’eau séchée. – Augmentez le dosage de produit de rinçage. – Vérifiez que le produit de lavage est correctement dosé et convient au lavage en lave-vaisselle.
Mode d'emploi Indications à l'attention des instituts d'essai L'essai selon la norme EN 60704 doit être effectué à pleine charge avec le programme de test (voir tableau des programmes). Les essais selon la norme EN 50242 doivent être effectués avec le bac à sel de l'adoucisseur d'eau plein, avec le bac d'alimentation du produit de rinçage plein et avec le programme de test (voir tableau des programmes).
Mode d'emploi Panier inférieur avec panier à couverts Panier à couverts 43
Instructions de montage et de raccordement INSTRUCTIONS DE MONTAGE ET DE RACCORDEMENT Installation du lave-vaisselle • Le lave-vaisselle doit bien reposer sur le sol et être mis à niveau sur un sol bien stable. • Dévisser les pieds réglables afin de compenser les inégalités du sol et d'adapter la hauteur de l'appareil aux meubles adjacents: – à l'aide d'un tournevis • Pour les lave-vaisselle encastrables les pieds arrières de l'appareil doivent être réglés de l'avant de l'appareil à l'aide d'un tournevis.
Instructions de montage et de raccordement Si le lave-vaisselle doit être installé en dessous d'un plan de travail de cuisine, vous devez enlever le plan de travail d'origine du lave-vaisselle comme suit: 0 1. Dévissez les vis des équerres de butée de la paroi arrière (1). 2. Faites glisser le plan de travail de l'appareil vers l'arrière sur environ 1 cm (2). 3. Soulevez le plan de travail à l'avant (3) et retirez-le.
Instructions de montage et de raccordement Raccordement du lave-vaisselle Arrivée d'eau Le lave-vaisselle possède des dispositifs de sécurité qui empêchent le reflux de l'eau de lavage dans le réseau de distribution d'eau potable et sont conformes aux prescriptions de sécurité en vigueur en matière de sécurité hydraulique. • Le lave-vaisselle peut être alimenté en eau froide et en eau chaude jusqu'à 60 °C max. • Le lave-vaisselle ne peut pas être raccordé à un chauffe-eau.
Instructions de montage et de raccordement • Si le tuyau d’arrivée d’eau fourni est trop court pour votre installation, utilisez exclusivement un tuyau complet normalisé disponible auprès de votre vendeur. Ne le coupez en aucun cas.
Instructions de montage et de raccordement – Poser le tuyau d’alimentation de telle manière qu’il ne soit jamais situé plus haut que le bord inférieur du clapet de sécurité.
Instructions de montage et de raccordement Evacuation de l’eau Tuyau d’évacuation Le tuyau d’évacuation ne peut être ni plié, ni écrasé ni replié sur lui-même. • Raccordement du tuyau d’évacuation: – hauteur maximum: 1 mètre. – hauteur minimum nécessaire, 40 cm. Tuyaux de prolongement • Les tuyaux de prolongement sont disponibles chez votre magasin vendeur. Le diamètre intérieur des flexibles de prolongement doit être de 19 mm.
Instructions de montage et de raccordement Système de protection contre les fuites d’eau A titre de protection contre les dégâts des eaux, le lave-vaisselle est équipé d’un système de protection contre les fuites d’eau. En cas d’anomalie, la soupape de sécurité dans le tuyau d'alimentation interrompt immédiatement l’arrivée d’eau et la pompe d’évacuation se met en marche. De cette manière, l’eau ne peut ni s’écouler ni déborder.
Instructions de montage et de raccordement Technique de raccordement Les tuyaux d’alimentation en eau et d’évacuation ainsi que le câble d’alimentation électrique se raccordent sur le côté du lave-vaisselle, aucune place n’étant disponible à cet effet à l’arrière de l’appareil.
Adresses du service après-vente ADRESSES DU SERVICE APRÈS-VENTE Electrolux Home Products Belgium Consumer services ELECTROLUX SERVICE Bergensesteenweg, 719 1502 Lembeek Province de Liège: S.D.E. Rue Gaucet, 26 4020 Liège 52 Téléphone Téléfax 02/363.04.44 02/363.04.00 02/363.04.60 04/343.11.60 04/343.47.
Conditions de garantie CONDITIONS DE GARANTIE DÉCLARATION DE CONDITIONS DE GARANTIE. Nos appareils sont produits avec le plus grand soin. Malgré cela, un défaut peut toujours se présenter. Notre service clientèle se chargera de réparer ceci sur demande, pendant ou après la période de garantie. La durée de vie de l'appareil n'en sera pas pour autant amputée. La présente déclaration de conditions de garantie est basée sur la Directive de l'Union Européenne 99/44/CE et les dispositions du Code Civil.
Conditions de garantie 11. Si des appareils sont encastrés, sous-encastrés, fixés ou suspendus de telle sorte que le retrait et la remise en place de ceux-ci dans leur niche d'encastrement prennent plus d'une demi-heure, les frais de prestation qui en découlent seront portés en compte. Les dommages connexes causés par ces opérations de retrait et de remise en place sont à charge de l'utilisateur. 12.
Service SERVICE au chapitre «Que faire si...» sont rassemblées les sources de panne les plus fréquentes, auxquelles vous pouvez remédier vous-même. Si vous faites malgré tout appel au service après-vente pour un des problèmes mentionnés ou suite à une erreur de manipulation, la visite du technicien de service après-vente ne sera pas gratuite pendant la période de garantie non plus. Si vous ne trouvez pas d’indication pour une panne dans ce mode d’emploi, veuillez vous adresser au service après-vente.
From the Electrolux Group. The world´s No.1 choice. "Le Groupe Electrolux est le premier fabricant mondial d'appareils de cuisine, d'entretien et d'extérieur. Plus de 55 millions de produits du Groupe Electrolux (tels que réfrigérateurs, cuisinières, lave-linge, aspirateurs, tronçonneuses, tondeuses à gazon) sont vendus chaque année pour un montant d'environ 14 milliards de dollars US dans plus de 150 pays à travers le monde." AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.