ÖKO_FAVORIT 80800 Dishwasher User Instructions
Dear customer, Please read these user instructions carefully. Above all please observe the safety instructions on the first few pages ofthese user instructions! Please keep these user instructions for later reference. Pass them on to any subsequent owner of the appliance. 1 0 The warning triangle and/or specific words (Warning!, Caution!, Important!) are used to highlight instructions that are important for your safety or for the function of the appliance.
Contents CONTENTS Operating Instructions .................................... 5 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Economical and Ecological Dishwashing . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Appliance Features and Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Notes for Test Institutes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Installation and Connection Instructions . . . . . . . . . . . . . . . . 37 Installing the Dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Free-Standing Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions OPERATING INSTRUCTIONS 1 Safety Instructions The safety aspects of AEG electrical appliances comply with accepted technical standards and the German Appliance Safety Law. Nevertheless, as a manufacturer we consider it our obligation to make you aware of the following safety information: Installation, Connection and Placing into Operation • The dishwasher may only be transported upright. • Check the dishwasher for transport damage.
Operating Instructions General Safety • Repairs to the dishwasher are only to be carried out by qualified service engineers. Improper repairs can give rise to significant hazards for the user. If your appliance needs repairing, please contact customer service or your dealer. • Never place the dishwasher in operation if the mains cable, water inlet or drain hose is damaged; or the control panel, work top or plinth area is damaged such that the inside of the appliance is freely accessible.
Operating Instructions • Do not sit or stand on the open door, the appliance may tip over. • In the event of a fault, first close the tap, then switch off the appliance and unplug it from the mains. If the appliance is permanently wired to the mains: switch off the fuse(s) or unscrew them. 2 Disposal Disposing of the Packaging Material Dispose of the dishwasher packaging material correctly. All the packaging materials used are harmless to the environment and can be recycled.
Operating Instructions 2 Economical and Ecological Dishwashing • Only connect the dishwasher to the hot water supply if your hot water is not electrically heated. • Ensure that the water softener is correctly adjusted. • Do not pre-rinse dishes under running water. • If you wash a small load, the load sensor calculates the amount of water necessary and shortens the programme. It is more economical to always wash with a full load.
Operating Instructions Appliance Features and Control Panel Top Spray Arm Rubber Seal for Connecting the Water Feed to the Middle Spray Arm Spray Arms Container for Special Salt Container for Rinse Aid Container for Detergent Inlet for Fan Assisted Drying Rating Plate Filters Interior Lighting 9
Operating Instructions Control Panel Signal Tone Water Softener Button Button AAN/UIT MARCHE/ARRET INTENSIEF INTENSIF 70° Door Handle MultiDisplay Set Start Delay E-STAND ECO 50° STARTTIJDKEUZE DEPART DIFFERE LOOPTIJD TEMPS RESTANT AUTO 65° NORMAAL NORMAL 65° QUICK RAPIDE 40° AUTO BIO 50° NORMAAL BIO NORMAL 50° VOORSPOELEN PRELAVAGE Control Panel Air Outlet for Fan Assisted Drying Indicators VOORSPOELEN PRELAVAGE REINIGEN LAVAGE SPOELEN RINCAGE NASPOELEN RINCAGE FINAL DROGEN SECHAGE EINDE
Operating Instructions Prior to using for the first time Prior to using for the first time, remove all the clips with which the dish racks are secured for transport. Then perform the following steps: 0 1. Adjust the water softener 2. Filling with Special Salt for the Water Softener 3. Filling with Rinse Aid Adjusting the Water Softener To prevent the build up of scale on dishes and in the dishwasher, the dishes must be washed with soft, i.e. low lime content water.
Operating Instructions 0 1. The dishwasher must be switched off. 2. Press the signal tone and water softener buttons simultaneously and keep them pressed 3. Press the ON/OFF switch. The LED indicators for the signal tone and water softener buttons flash. 4. Press the softener button again. The multi-display indicates the hardness setting. 5. Pressing the hardness button increases the hardness setting by 1. (Exception: Hardness setting 0 follows hardness setting 9). 6.
Operating Instructions 3 The water expelled by filling the salt container with special salt runs out of the salt container onto the base of the washing compartment. This is not a cause for concern, the water will be pumped out at the start of the next wash programme. 5. Clean any salt remnants on the container opening. 6. Turn the lid clockwise to the stop, otherwise special salt will leak into the wash water, this could lead to poor wash results.
Operating Instructions Filling with Rinse Aid Rinse aid ensures that your dishes gleam and are free from spots, and that you glasses are clear. 1 Use only branded rinse aid for dishwashers. Never fill the rinse aid container with any another substance (e.g. concentrated vinegar). This would damage the appliance. Fill with rinse aid: – Prior to using the dishwasher for the first time – When the RINSE AID indicator (NASPOELEN; RINCAGE FINAL) on the control panel is illuminated.
Operating Instructions Adjusting Rinse Aid Dosing 3 As the dishes are washed rinse aid is released from the dispenser into the wash water. The dose is factory set at 4, and can be adjusted from 1 to 6. Only change the setting if streaks, milky spots or dried on water marks are visible on glasses or crockery. 0 1. Open the door of the dishwasher. 2. Press the rinse aid compartment release button with your finger. 3. Fully open the rinse aid compartment lid. 4. Set the dose level. 5.
Operating Instructions In Daily Use • Is it necessary to refill with special salt or rinse aid? • Load cutlery and dishes into the dishwasher • Fill with dishwasher detergent • Select a wash programme suitable for the cutlery and dishes • Start the wash programme Loading cutlery and dishes 1 Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.
Operating Instructions – To avoid damage to glasses, they must not touch – Do not lay small objects (e.g. lids) in the cutlery rack Loading Cutlery 1 Long, pointed items of cutlery are a hazard if placed in the cutlery basket, particularly to children (see Safety Instructions). They should therefore be placed in the upper rack. Place knives, small spoons and small forks in the cutlery tray. Place forks and spoons that do not fit in the cutlery tray in the cutlery basket.
Operating Instructions If you use the grid insert, it is not possible to open the cutlery basket. To ensure that the cutlery basket cannot open on removal from the appliance, you should always hold both parts of the two part handle. 0 1. Place the cutlery basket on a table or work surface 2. open the two part handle 3. remove cutlery 4. close the two part handle.
Operating Instructions Loading Pans, Frying Pans and Large Plates Load large and heavily soiled dishes in the lower rack. To ease the loading of large items at some dishwasher-models the two rows of prongs for the right-hand plate insert can be folded down: 0 1. Slightly lift the right plate insert. 3 2. Fold the plate insert to the left.
Operating Instructions Loading Cups, Glasses and Coffee Services Load small, delicate items and long pointed cutlery in the upper rack. • Arrange items of crockery on the folding cups racks so that they are offset from each other and water can reach all items. • The cup racks can be folded up out of the way for tall items. • Lay or hang wine, champagne, and brandy glasses in the cut outs on the cup racks. • Glasses, beakers, etc. can also be placed on the two rows of prongs on the left of the upper rack.
Operating Instructions Adjusting the Height of the Upper Basket Maximum Height of the Dishes in the Upper Basket Lower Basketk 3 With upper basket raised 22 cm 31 cm With upper basket lowered 24 cm 29 cm The height of the basket can also be adjusted when it is loaded. Depending on the model, your appliance is provided with one of the following types of upper basket: Lowering the Upper Basket: 0 1. Pull the upper basket out completely. 2. Lift the upper basket at the rear right and lower.
Operating Instructions Filling with Detergent 1 Only use dishwasher detergent. Fill with detergent: – Prior to the start of a wash programme (not for the pre wash programme). The detergent is released into the wash water during the programme. Please observe the manufacturer's dosing and storage recommendations as stated on the detergent packaging. The detergent compartment is on the inside of the dishwasher door. 0 1. If the lid is closed: press release button (1). The lid springs open. 2 2.
Operating Instructions Bio Wash Programmes and Concentrated Detergents Based on their chemical composition, dishwasher detergents can be split into two basic types: – Conventional, alkaline detergents with caustic components – Weak alkaline concentrated detergents with natural enzymes.
Operating Instructions Selecting the Wash Programme (Programme Table) Choose the most suitable wash programme with the aid of this table: Type of Dishes In Addition Type of Soiling Dinner Service and Cooking Utensils • heavily to lightly soiled • dried leftovers with non-temperature resistant dishes • normally to lightly soiled particularly suited to the use of concentrated detergents.
Operating Instructions Type of Dishes Dinner Service and Cooking Utensils Dessert Dishes and Coffee Service All Types of Dishes In Addition with non-temperature resistant dishes with delicate glasses - Type of Soiling • normally soiled • lightly soiled particularly suited to the use of concentrated detergents. Suitable Wash Programme: Programme Sequence 2 Consumption Figures: 3) 4) 5) Used dishes that are collected in the dishwasher and are to be washed at a later point in time.
Operating Instructions Starting the Wash Programme 0 1. Check that the dishes and cutlery are loaded into the dishwasher in such a manner that the spray arms are free to rotate. 2. Open the tap fully. 3. Shut the door. 4. Press the ON/OFF switch (AAN/UIT; MARCHE/ARRET) The ON/OFF switch indicator (AAN/UIT; MARCHE/ARRET) illuminates. 5. Press the button for the programme required (see “Programme Table“).
Operating Instructions Interrupting the wash programme by opening the door of the dishwasher Hot steam can escape when the door is opened. There is a risk of scolding! Open the door carefully. 0 1. Open the door of the dishwasher. The wash programme stops. 2. Shut the door. The wash programme continues. 1 Cancelling the wash programme 0 1. Press the button for the wash programme in progress and keep it pressed.
Operating Instructions Setting or Changing the Start Delay Timer Using the start delay timer you can adjust when the wash programme is to begin within the next 19 hours. Setting the start delay timer: 0 1. Press the ON/OFF button (AAN/UIT; MARCHE/ARRET). 2. Keep pressing the DELAY TIMER button (STARTTUIDKREUZE; DEPART DIFFERE) until the number of hours of delay until the wash programme is to start are flashing on the multi-display. 3. Press the button for the desired wash programme.
Operating Instructions Switching Off the Dishwasher Only switch the dishwasher off when the multi-display indicates “0“ for the remaining programme time and END (EINDE; FIN) is illuminated on the programme progress display. If the signal tone for the end of the washing programme is enabled, a continuous tone indicates the end of the programme for 10 seconds. If the dishwasher is not switched off, the continuous tone is repeated twice after a few minutes. 0 1.
Operating Instructions Cleaning the Filter The filters in the base of the washing compartment are to a large extent self-cleaning. Nevertheless the filters should be checked and cleaned from time to time. Dirty filters will degrade the washing result. 0 1. Open the door, remove the lower rack. 2. The dishwasher filter system comprises a coarse/fine filter, microfilter and a flat filter. Unlock the filter system using the handle on the microfilter, and remove. 3.
Operating Instructions What to do, when ... Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call in customer service to resolve one of the malfunctions listed here, or rectify an error made in the operation of the appliance, the customer service engineer’s visit is not free of charge, even during the period of guarantee. ... Error messages are displayed.
Operating Instructions Malfunction 32 Possible Cause Remedy During a washing programme, the display SPRAY ARM (SPROIEARM; BRAS) The middle spray arm is lights up and a longer warn- jammed. ing tone can be heard at the same time. Open the door carefully. Hot steam can escape when the door is opened. There is a risk of scalding! Arrange the dishes and cutlery in the bottom basket so that the middle spray arm can rotate freely. Close the dishwasher door. The display DOOR (DEUR; PORTE) lights up.
Operating Instructions ...there are problems with the operation of the dishwasher. Malfunction Possible Cause Remedy The door of the dishwasher is Shut the door. not closed properly. Mains plug is not plugged in. Insert mains plug. House fuse in defective. Replace fuse. In the case of dishwasher models with start delay timer: A start delay is selected. Where dishes are to be washed immediately, for appliances - with multidisplay, set the delay start to 0.
Operating Instructions – The filter in the base of the washing compartment is dirty or incorrectly positioned. – Detergent was not used or too little was used. – In the case of scale deposits on the dishes: the special salt container is empty or the water softener is incorrectly adjusted. – The drain hose is incorrectly laid. The dishes are wet and dull. – Rinse aid was not used. – The rinse aid container is empty. There are streaks, milky spots or a bluish coating on glasses and dishes.
Operating Instructions Technical Data Capacity: 12 place settings including serving dishes Permitted Water Pressure: 1-10 bar (=10-100 N/cm2 = 0.1-1.0 MPa) Electrical Connection: Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door on the right. Dishwasher: Free-Standing Appliances Dimensions: 850 x 600 x 600 (H x W x D in mm) Max.
Operating Instructions Notes for Test Institutes Testing in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test programme (see Programme Table). Tests in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see Programme Table). 36 Full Load: 12 place settings incl. serving dishes Half Load: 6 place settings incl.
Installation and Connection Instructions INSTALLATION AND CONNECTION INSTRUCTIONS Installing the Dishwasher • The dishwasher must be installed on a firm floor and adjusted to ensure that it is stable and level. • To compensate for unevenness in the floor and to match the height of the appliance to that of surrounding units extend the threaded feet by unscrewing: – use a screwdriver. • The drain hose, inlet hose and mains cable must not be kinked or crushed when the dishwasher is in position.
Installation and Connection Instructions • If the dishwasher is installed underneath a kitchen work surface, the original work surface of the dishwasher is to be removed as follows: – Unscrew the screws (1) from the elbows on the back side. – Slide the work surface approx. 1cm to the rear (3) , lift at the front (4) and remove. – Press the work surface retaining brackets at the position shown in the diagram (4) and remove the bracket at an angle to the rear (5).
Installation and Connection Instructions Connecting the Dishwasher Water Connection The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations. • The dishwasher can be connected to cold and hot water supplies up to max. 60 °C. • The dishwasher must not be connected to open hot water appliances or instantaneous water heaters.
Installation and Connection Instructions Water drain Drain hose 1 The drain hose must not be kinked, crushed or entangled. • Connecting the drain hose: – Maximum permitted height: 1 metre. – Minimum required height 30 cm above the lower edge of the machine. Extension hoses • Extension hoses are available from your dealer or customer service. The internal diameter of the extension hoses must be 19 mm to ensure that the function of the appliance is not impeded.
Installation and Connection Instructions Leak Prevention System For protection from damage due to water leaks, the dishwasher is equipped with a leak prevention system, the AQUA CONTROL SYSTEM. In the event of a fault, the safety valve immediately interrupts the supply of water to the appliance and the drain pump switches on. It is thus not possible for water to either leak or overflow. Any water left in the appliance is automatically pumped out.
Installation and Connection Instructions Connections The water inlet and drain hoses, as well as the mains cable must be connected beside the dishwasher as there is insufficient space behind the appliance. The plumbing and electrical installation example given below can only be regarded as a recommendation; the actual situation where the dishwasher is to be installed will define the exact installation (available connections, local electricity and water board regulations for connecting up appliances, etc.).
Adressen klantendienst ADRESSEN KLANTENDIENST Telefon Electrolux Home Products Belgium Consumer services 02/363.04.44 ELECTROLUX SERVICE Bergensesteenweg, 719 1502 Lembeek Province de Liège: S.D.E. Rue Gaucet, 26 4020 Liège 04/343.11.60 Telefax 02/363.04.00 02/363.04.60 04/343.47.
Garantiebepalingen GARANTIEBEPALINGEN WAARBORGVOORWAARDEN 1. WERKING: De waarborg treedt slechts in werking indien de aankoopfaktuur kan voorgelegd worden. 2. TOEPASSING Deze waarborg gaat in op het ogenblik van de levering aan de gebruiker. 3.
Garantiebepalingen 8. VOOR HERSTELLINGEN zich wenden tot uw AEG verkorper of tot de door AEG Aanvaarde Herstelbedrijven. 9. Electrolux Home Products Belgium CONSUMER SERVICES AEG Bergensesteenweg, 719-1502 Lembeek. Tél. 02/363.04.
Service SERVICE In the section "What to do, if..." the most important sources of faults that you can rectify yourself are summarised. If, nevertheless, you call in customer service to resolve a problem listed in these instruction, or because of an error made in operating the appliance, the customer service engineer’s visit is not free of charge, even during the warranty period. If you can not find any information on a specific malfunction in these operating instructions, please contact customer service.
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.