User manual

Operating Instructions
10
Control Panel
The Control Panel comprises the ON/OFF switch M and the pro-
gramme buttons with LED indicators.
Signal Tone Button: In addition to the wash programme printed on
the front panel, this button can be used to set whether a signal tone is
to indicate that a wash programme is finished.
Water Softener Button: In addition to the wash programme printed
on the front panel, this button can be used to adjust the dishwasher's
water softener.
The Multi-Display can display,
– the hardness setting to which the water softener is set.
– whether the signal tone is switched on or off.
– the start delay that is set.
– how long the current wash programme can be expected to last.
– which fault has occurred on the dishwasher.
Cycle progress display: The current stage of the programme will
always be shown in the cycle progress display.
Multi-
Display
Control
Panel
Indicators
Si
gna
l
Tone
Button
Set Start
Delay
Air Outlet for Fan
Assisted Drying
Door
Handle
Display for the Individual
Wash Programme Steps
Water Softener
Button