User manual

Operating Instructions
16
Setting the Signal Tone for the End of the Wash Pro-
gramme
You can set whether, in addition to the optical indication of the end of
the programme, a signal tone is also to be heard.
0 1. The dishwasher must be switched off.
2. Press the signal tone and water softener buttons simultaneously and
keep them pressed.
3. Press the ON/OFF switch. The LED indicators for the signal tone and
water softener buttons flash.
4. Press the signal tone button again.
The multi-display indicates the current setting:
5. Pressing the signal tone button changes the setting.
6. Once the multi-display indicates the required setting, press the ON/OFF
switch. The setting is then saved.
In Daily Use
• Is it necessary to refill with special salt or rinse aid?
• Load cutlery and dishes into the dishwasher
• Fill with dishwasher detergent
• Select a wash programme suitable for the cutlery and dishes
• Start the wash programme
b0
Signal tone switched off
b1
Signal tone switched on (factory setting)