User manual

Operating Instructions
33
What to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer’s visit is not free of
charge, even during the period of guarantee.
...Fault messages are displayed.
• If the multi-display indicates the fault code (2 or the ^ , `
or
O indicator illuminates, you can probably rectify the fault
yourself. Following rectification of a (2 fault and
^ indicator
fault, press the button for the wash programme that has been
started. The wash programme continues. If the fault code is displayed
again, contact customer service.
• For all other faults that are indicated, please contact customer serv-
ice stating the fault code.
Malfunction Possible Cause Remedy
The programme indicator for
the selected programme is
flashing, the
^ indicator is
illuminated and 1 warning
tone can be heard that is
continually repeated:
no water is running into the
dishwasher.
Tap is blocked or furred
with lime-scale.
Clean tap.
The filter (where present)
in the threaded hose fit-
ting at the water inlet
valve is blocked.
Clean the filter in the
threaded hose fitting.
The water inlet hose
is not correctly laid.
Check hose
installation.
The programme indicator for
the selected programme is
flashing,
the multi-display is indicat-
ing the fault code (2 and
2 warning tones can be
heard that are continually
repeated.
The siphon is blocked. Clean siphon.
The water drain hose
is not correctly laid.
Check hose
installation.