FAVORIT 80820 Lave-vaisselle Informations pour les utilisateurs
Chère cliente, cher client, veuillez lire avec soin ces informations pour les utilisateurs. Tenez surtout compte de la section “Sécurité” des premières pages de ces informations pour les utilisateurs! Conservez ces informations aux utilisateurs pour un usage ultérieur. Transmettez-les à un éventuel possesseur ultérieur de la machine.
Sommaire SOMMAIRE Mode d'emploi ............................................. 5 Consignes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Protection de l’environnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Faire la vaisselle de manière économique et respectant l'environnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Vue de l'appareil et bandeau de commande . . . . . . . . . . . . . . . .
Sommaire Entretien et nettoyage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Nettoyage du filtre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Que faire quand... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...les messages de défaut sont affichés. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...il y a des problèmes lors du fonctionnement du lave-vaisselle. . . . . . . .
Mode d'emploi MODE D'EMPLOI 1 Consignes de sécurité La sécurité des appareils électroménagers AEG est conforme aux règles reconnues de la technique et à la législation portant sur la sécurité des appareils. En tant que fabricant, nous attirons cependant votre attention sur les indications supplémentaires suivantes: Installation, raccordement, mise en service • Le lave-vaisselle peut uniquement être transporté debout. • Contrôlez le lave-vaisselle pour dégâts de transport éventuels.
Mode d'emploi • Lors de la mise au rebut du lave-vaisselle: coupez le câble d'alimentation au ras de l'appareil et jetez-le. Neutralisez le dispositif de fermeture de porte, de façon à ce que la porte ne ferme plus. Sécurité générale • Les réparations sur le lave-vaisselle peuvent uniquement être effectuées par du personnel qualifié. Les réparations non effectuées dans les règles peuvent être la source de dangers importants pour l'utilisateur.
Mode d'emploi • Le système de protection contre les fuites d'eau protège de manière fiable contre les dégâts des eaux. Les conditions suivantes doivent cependant être remplies à cet effet: – L'appareil doit également rester raccordé à l'alimentation électrique lorsqu'il n'est pas en service. – Le lave-vaisselle doit être installé correctement. – Fermez toujours le robinet d'arrivée d'eau lorsque le lave-vaisselle n'est pas utilisé pendant une période prolongée, p. ex. durant un voyage de vacances.
Mode d'emploi 2 Faire la vaisselle de manière économique et respectant l'environnement • Ne raccordez le lave-vaisselle à l'eau chaude que si vous avez une installation d'eau chaude qui ne fonctionne pas avec un chauffage électrique. • Réglez correctement l'installation d'adoucissement d'eau. • Ne rincez pas préalablement la vaisselle à l'eau courante.
Mode d'emploi Vue de l'appareil et bandeau de commande Bras de lavage supérieur Joint en caoutchouc pour couplage de la tuyauterie d'arrivée d'eau au bras de lavage Bras de lavage Commutateur de plage de dureté Réservoir pour sel régénérant Réservoir de produit de lavage Réservoir pour produit de rinçage Filtres Plaque signalétique Eclairage intérieur 9
Mode d'emploi Bandeau de commande Poignée de la porte Touches de fonction 1 3 2 4 Touches de fonction Zone de commande Départ différé Voyants Voyant des étapes Fenêtre d’affichage de programme La zone de commande se compose de la touche MARCHE/ARRET et des touches de programme avec leurs voyants.
Mode d'emploi Les voyants ont la signification suivante: SEL PDT. RINCAGE EAU FILTRE PORTE ASPERSION 3 Remplir le réservoir de sel régénérant Remplir le réservoir de produit de rinçage Ouvrir le robinet d'eau Nettoyer le système de filtration du lave-vaisselle La porte du lave-vaisselle est ouverte Le bras de lavage intermédiaire est bloqué Le voyant FILTRE doit vous rappeler de contrôler à l'occasion les filtres du lave-vaisselle et, si nécessaire, de les nettoyer.
Mode d'emploi Avant la première utilisation Avant la mise en service, retirez les attaches en plastique avec lesquelles les paniers à vaisselle ont été bloqués pendant le transport. Procédez ensuite aux étapes suivantes: 1. Réglez l’adoucisseur 2. Remplissez le réservoir de sel régénérant 3.
Mode d'emploi 1)(°th) degré français, unité de mesure de la dureté de l'eau 2)(mmol/l) millimole par litre, unité de mesure internationale de la dureté de l'eau *réglage d'usine Réglez l'adoucisseur suivant le tableau en fonction de la dureté de l'eau de votre région: 0 1. Le lave-vaisselle doit être mis hors service. 2. Réglage mécanique: Ouvrez la porte du lave-vaisselle. 3. Sortez le panier à vaisselle inférieur du lave-vaisselle. 4. Tournez le commutateur de plage de dureté sur O ou 1. 5.
Mode d'emploi Remplissage du réservoir de sel régénérant 1 Utilisez exclusivement du sel spécial régénérant pour lave-vaisselle. Ne remplissez jamais le réservoir de sel régénérant à l’aide d’autres sortes de sel (p. ex. sel alimentaire) ni de produit de lavage. Ceci pourrait rendre inutilisable l’adoucisseur. Soyez donc vigilant lors du remplissage. Versez le sel régénérant: – Avant la première mise en service du lave-vaisselle – Si le voyant SEL s’allume sur le bandeau de commande.
Mode d'emploi Produit de rinçage Le produit de rinçage permet d'obtenir une vaisselle éclatante et des verres impeccables. 2 possibilités vous sont offertes pour introduire le produit de rinçage: • Si vous utilisez des produits de lavage contenant déjà un produit de rinçage, le produit de lavage (avec le produit de rinçage intégré) doit être introduit dans le bac destiné au produit de lavage.
Mode d'emploi Remplir le réservoir de produit de rinçage Si vous utilisez séparément un produit de lavage et un produit de rinçage, remplissez le réservoir de ce dernier: – Avant la première mise en service du lave-vaisselle – Lorsque le voyant PRODUIT DE RINÇAGE est allumé sur le bandeau de commande. Le réservoir de produit de rinçage se trouve sur la face intérieure de la porte du lave-vaisselle. 0 1. Ouvrez la porte. 2. Appuyez sur la touche de déverrouillage du réservoir de produit de rinçage. 3.
Mode d'emploi Régler la dose de produit de rinçage Ce produit évite que l’eau ne reste sur la vaisselle sous forme de gouttelettes laissant des taches blanches après séchage. L’admission du produit de rinçage se fait automatiquement. Vous pouvez régler le dosage de 1 à 6. A la livraison, votre appareil est réglé sur la position 4. Ne modifiez le dosage que si vous constatez de mauvais résultats de rinçage. (voir «Que faire si ...?») 0 1. Ouvrez la porte du lave-vaisselle. 2.
Mode d'emploi Activer/désactiver le signal sonore de fin de programme de lavage Vous pouvez déterminer si un signal sonore doit retentir en plus des voyants de fin du programme. 0 1. Le lave-vaisselle automatique doit être éteint. 2. Appuyez simultanément sur les touches de fonction 1 et 2 en les maintenant enfoncées. 3. Appuyez sur la touche MARCHE/ARRET. Les voyants des touches de fonction activées clignotent. 4. Appuyez sur la touche de fonction 1.
Mode d'emploi Disposez les couverts et la vaisselle 1 Les éponges, serviettes de ménage et tous les objets susceptibles de se saturer en eau, ne peuvent pas être lavés au lave-vaisselle.
Mode d'emploi Disposer les couverts 1 0 Les longs couverts pointus dans le panier à vaisselle constituent une source de danger, en particulier pour les enfants (voir conseils de sécurité). Ils doivent pour cette raison être placés dans le panier supérieur. Disposer les couteaux, petites cuillères et petites fourchettes dans le tiroir à couverts. Disposer dans le panier à couverts les fourchettes et les cuillères qui n'ont pas place dans le tiroir à couverts .
Mode d'emploi Pour certains modèles de lavevaisselle, il est possible de déplier le panier à couverts. Afin que le panier à couverts ne puisse pas s'ouvrir lorsqu'on l'enlève, vous devez toujours entourer entièrement de la main les deux parties de la poignée. 0 1. Placer le panier à couverts sur la table ou sur le plan de travail 2. écarter l'une de l'autre les deux parties de la poignée 3. enlever les couverts 4. refermer les deux parties de la poignée.
Mode d'emploi Variante 2: le support à assiettes à droite du panier inférieur est rabattable vers la gauche Afin de placer plus facilement les récipients les plus grands, les rayonnages du support à assiettes à droite du panier inférieur sont rabattables vers la gauche : 0 1. Soulevez légèrement à l'arrière les rayonnages du support à assiettes de droite. 3 2. Rabattez les rayonnages du support à assiettes vers la gauche.
Mode d'emploi Variante 4 : les deux supports à assiettes à l'arrière du panier inférieur sont rabattables en croisant les rayonnages 3 Afin de placer plus facilement les récipients les plus grands, les rayonnages des deux supports à assiettes à l'arrière du panier inférieur sont rabattables en se croisant. Disposition de la vaisselle (tasses, verres, …) Placez les petites pièces de vaisselle, fragiles et les longs couverts dans le panier supérieur.
Mode d'emploi Réglage en hauteur du panier supérieur Hauteur maximale de vaisselle dans le panier supérieur le panier inférieur 3 avec le panier supérieur soulevé 22 cm 31 cm avec le panier supérieur abaissé 24 cm 29 cm Le réglage en hauteur est également possible lorsque les paniers sont remplis. Mise en position basse du panier supérieur: 0 1. Sortez entièrement le panier supérieur. 2. Soulevez le panier supérieur jusqu'à la butée et laissez-le descendre verticalement.
Mode d'emploi Remplissage du produit de lavage 1 N’utilisez que des produits de lavage pour des lave-vaisselle ménagers. Le produit de lavage est dangereux! – Le réservoir de produit de lavage doit être rempli avant chaque programme de lavage, à l’exception du programme prélavage. Le produit de lavage est libéré automatiquement au cours du programme de lavage. Veuillez respecter les recommandations de dosage et de stockage du fabricant mentionnées sur les emballages des produits de lavage.
Mode d'emploi Utilisation des tablettes de détergent combinées “3 en 1” Recommandations générales Ces produits sont des tablettes qui combinent les fonctions détergent / aide au rinçage et sel. 0 1. Avant d'utiliser ces produits, vous devriez d'abord vérifier que la dureté de l'eau de votre alimentation en eau est compatible avec l'utilisation de ces produits en vous référant aux instructions fournies par le fabricant du détergent (Voir sur l'emballage). 2.
Mode d'emploi Produits de lavage compacts Les produits de lavage pour lave-vaisselle peuvent se diviser en deux catégories principales selon leur composition chimique: – les produits de lavage alcalins traditionnels, à base de substances corrosives, – les produits de lavage compacts faiblement alcalins, à base d'enzymes naturelles.
Mode d'emploi Sélectionner le programme de lavage (tableau des programmes) Sélectionnez le programme de lavage approprié à l'aide de ce tableau: Type de vaisselle Service de table et plats Récipients - - Service de table et plats de plus • normalement sale • utilisation toute récente, de moyennement à d'aliments légèrement sale - • très sale Type de salissures • restes séchés • restes séchés d'aliments, en particulier convient particulièblancs d'oeufs rement en cas d'utiet amidon lisation de dét
Mode d'emploi Type de vaisselle Service de table et plats Services à café et à dessert Tous les types de vaisselle avec de la vaisselle sensible à la chaleur avec des verres fragiles - de plus Type de salissures • normalement sale • légèrement sale convient particulièrement en cas d'utilisation de détergents compacts Programme de lavage approprié: Déroulement du programme 1) Données de consommation: 2) ò ò NORMAAL; NORMAL 50° E-STAND; Prélavage Lavage Rinçage intermédiaire Rinçage final S
Mode d'emploi Lancer le programme de lavage 0 1. Vérifiez que la vaisselle et les couverts sont disposés de telle façon dans le lave-vaisselle que les bras de lavage puissent tourner librement. 2. Ouvrir à fond le robinet d'arrivée d'eau. 3. Fermez la porte. 4. Appuyez sur l'interrupteur MARCHE/ARRET. Le voyant de l'interrupteur MARCHE/ARRET s'allume. 5. Appuyez sur la touche correspondant au programme souhaité (voir «Tableau des programmes»).
Mode d'emploi Interrompre le programme de lavage en ouvrant la porte du lavevaisselle. Lors de l'ouverture de la porte, de la vapeur chaude peut sortir de l'appareil. Danger de brûlure! Ouvrez la porte avec précaution. 0 1. Ouvrez la porte du lave-vaisselle. Le programme de lavage s'arrête. 2. Fermez la porte. Le programme de lavage se poursuit. 1 Interrompre le programme de lavage 0 1. Appuyez sur la touche du programme de lavage en cours.
Mode d'emploi Réglage ou modification du départ différé Cette touche vous permet de retarder le départ de programme de lavage jusqu’à 19 heures. Réglage du départ différé: 0 1. Appuyez sur la touche MARCHE/ARRET. 2. Appuyez sur la touche DEP. DIFFERE jusqu’à ce que le nombre d’heures au bout desquelles le programme de lavage doit démarrer clignote dans la fenêtre d’affichage. 3. Appuyez sur la touche correspondant au programme souhaité.
Mode d'emploi Eteindre le lave-vaisselle Avant de mettre le lave-vaisselle hors service, attendez que la fenêtre d'affichage indique «0» comme temps restant du programme de lavage et que le voyant FIN s'allume dans l'affichage de déroulement du programme. Lorsque le signal sonore est activé, une tonalité continue d'une durée de 5 secondes retentit à la fin du programme de lavage. 0 1. Appuyez sur l'interrupteur MARCHE/ARRET. Tous les voyants s'éteignent.
Mode d'emploi Nettoyage du filtre Les filtres sont situés au fond de la cuve. Ils doivent être nettoyés très régulièrement. Des filtres non nettoyés nuisent au résultat de lavage. 0 1. Ouvrez la porte, sortez le panier inférieur. 2. Le système de filtrage du lave-vaisselle se compose d’un filtre mixte grossier/fin, d’un microfiltre et d’un filtre plat. 3. Tournez la poignée de l’ensemble filtre mixte grossier/fin et microfiltre d’¼ de tour vers la gauche puis soulevez le tout. 4.
Mode d'emploi Que faire quand... Si vous constatez une anomalie dans le lavage ou le fonctionnement de votre appareil, consultez les indications données dans cette notice d’utilisation avant de faire appel au Service Après Vente. Dans la majorité des cas, vous pourrez y remédier vous-même. ...les messages de défaut sont affichés.
Mode d'emploi Symptômes L'affichage multiple indique le code d'erreur (3 et on entend 3 tonalités sonores, qui se répètent sans arrêt. 36 Cause possible Solution Le système de protection contre les fuites d'eau a déclenché. Fermer le robinet d'arrivée d'eau et avertir le service après vente. Pendant un programme de lavage, le voyant ASPERSION (ou BRAS) s'allume à intervalles irréguliers et on entend en même temps une 1 tonalité sonore prolongée. Le bras de lavage intermédiaire est bloqué.
Mode d'emploi ...il y a des problèmes lors du fonctionnement du lavevaisselle. Symptômes Cause possible La porte du lave-vaisselle n'est pas correctement fermée. Solution Fermez la porte. L'appareil n'est pas correcteBranchez la prise. ment branché. Le programme ne démarre pas. Le fusible de l'installation électrique de la maison n'est Remplacez le fusible. pas en bon état.
Mode d'emploi ... le résultat de lavage n'est pas satisfaisant. La vaisselle n'est pas propre. – Vous n'avez pas sélectionné le bon programme de lavage. – La vaisselle était disposée de telle façon que l'eau n'a pas pu atteindre toutes les pièces. Les paniers à vaisselle ne peuvent pas être surchargés. – Les filtres ne sont pas propres ou sont mal placés. – Le produit de lavage n'est pas correctement dosé ou ne convient pas au lavage en lave-vaisselle.
Mode d'emploi Caractéristiques techniques Capacité: 12 couverts normalisés y compris vaisselle de service Pression d’eau autorisée: 1-10 bar (=10-100 N/cm2 = 0.1-1.0 MPa) Raccordement électrique: Les informations concernant le raccordement électrique se trouvent sur la plaque signalétique placée sur le côté droit de la porte du lave-vaisselle. Lave-vaisselle: «pose-libres» Dimensions: 850 x 600 x 600 (H x L x P en mm) poids max.
Mode d'emploi Indications à l'attention des instituts d'essai L'essai selon la norme EN 60704 doit être effectué à pleine charge avec le programme de test (voir tableau des programmes). Les essais selon la norme EN 50242 doivent être effectués avec le bac à sel de l'adoucisseur d'eau plein, avec le bac d'alimentation du produit de rinçage plein et avec le programme de test (voir tableau des programmes).
Instructions de montage et de raccordement INSTRUCTIONS DE MONTAGE AGE ET DE RACCORDEMENT Installation du lave-vaisselle • Le lave-vaisselle doit bien reposer sur le sol et être mis à niveau sur un sol bien stable.
Instructions de montage et de raccordement Si le lave-vaisselle doit être installé en dessous d'un plan de travail de cuisine, vous devez enlever le plan de travail d'origine du lave-vaisselle comme suit: 0 1. Dévissez les vis des équerres de butée de la paroi arrière (1). 2. Faites glisser le plan de travail de l'appareil vers l'arrière sur environ 1 cm (2). 3. Soulevez le plan de travail à l'avant (3) et retirez-le.
Instructions de montage et de raccordement Raccordement du lave-vaisselle Arrivée d'eau Le lave-vaisselle possède des dispositifs de sécurité qui empêchent le reflux de l'eau de lavage dans le réseau de distribution d'eau potable et sont conformes aux prescriptions de sécurité en vigueur en matière de sécurité hydraulique. • Le lave-vaisselle peut être alimenté en eau froide et en eau chaude jusqu'à 60 °C max. • Le lave-vaisselle ne peut pas être raccordé à un chauffe-eau.
Instructions de montage et de raccordement 3 Le chapitre suivant concerne uniquement les lave-vaisselle qui ont un clapet de sécurité au raccord vissé au niveau du robinet d’eau : Tuyau d’alimentation avec clapet de sécurité Après avoir raccordé le tuyau d’alimentation à double conduit, le clapet de sécurité se situe directement au contact du robinet. De ce fait, le tuyau d’alimentation n’est sous pression que pendant l’alimentation en eau.
Instructions de montage et de raccordement Evacuation de l’eau Tuyau d’évacuation Le tuyau d’évacuation ne peut être ni plié, ni écrasé ni replié sur lui-même. • Raccordement du tuyau d’évacuation: – hauteur maximum: 1 mètre. – hauteur minimum nécessaire, 40 cm. Tuyaux de prolongement • Les tuyaux de prolongement sont disponibles chez votre magasin vendeur. Le diamètre intérieur des flexibles de prolongement doit être de 19 mm.
Instructions de montage et de raccordement Système de protection contre les fuites d'eau A titre de protection contre les dégâts des eaux, le lave-vaisselle est équipé d'un système de protection contre les fuites d'eau, le SYSTEME AQUA CONTROL. En cas d'anomalie, la soupape de sécurité interrompt immédiatement l'arrivée d'eau et la pompe d'évacuation se met en marche. De cette manière, l'eau ne peut ni s'écouler, ni déborder.
Instructions de montage et de raccordement Raccordement électrique 1 Suivant les conditions techniques de raccordement en vigueur de la compagnie d'électricité, un raccordement fixe au réseau électrique peut uniquement être effectué par un électricien agréé. Lors du raccordement, veillez à respecter les prescriptions VDE et le cas échéant les stipulations supplémentaires de la compagnie d'électricité locale.
Instructions de montage et de raccordement Technique de raccordement Les tuyaux d’alimentation en eau et d’évacuation ainsi que le câble d’alimentation électrique se raccordent sur le côté du lave-vaisselle, aucune place n’étant disponible à cet effet à l’arrière de l’appareil.
Adresses du service après-vente ADRESSES DU SERVICE APRÈS-VENTE Electrolux Home Products Belgium Consumer services ELECTROLUX SERVICE Bergensesteenweg, 719 1502 Lembeek Province de Liège: S.D.E. Rue Gaucet, 26 4020 Liège Téléphone Téléfax 02/363.04.44 02/363.04.00 02/363.04.60 04/343.11.60 04/343.47.68 CONDITIONS DE GARANTIE DÉCLARATION DE CONDITIONS DE GARANTIE. Nos appareils sont produits avec le plus grand soin. Malgré cela, un défaut peut toujours se présenter.
Conditions de garantie 6. Il ne peut pas être fait appel à la garantie pour des anomalies bénignes qui n'affectent pas la valeur et la solidité générales de l'appareil. 7. L'obligation de garantie perd ses effets lorsque les défectuosités sont causées par : • une réaction chimique ou électrochimique provoquée par l'eau, • des conditions environnementales anormales en général, • des conditions de fonctionnement inadaptées, • un contact avec des produits agressifs. 8.
Service SERVICE au chapitre «Que faire si...» sont rassemblées les sources de panne les plus fréquentes, auxquelles vous pouvez remédier vous-même. Si vous faites malgré tout appel au service après-vente pour un des problèmes mentionnés ou suite à une erreur de manipulation, la visite du technicien de service après-vente ne sera pas gratuite pendant la période de garantie non plus. Si vous ne trouvez pas d’indication pour une panne dans ce mode d’emploi, veuillez vous adresser au service après-vente.
From the Electrolux Group. The world´s No.1 choice. "Le Groupe Electrolux est le premier fabricant mondial d'appareils de cuisine, d'entretien et d'extérieur. Plus de 55 millions de produits du Groupe Electrolux (tels que réfrigérateurs, cuisinières, lave-linge, aspirateurs, tronçonneuses, tondeuses à gazon) sont vendus chaque année pour un montant d'environ 14 milliards de dollars US dans plus de 150 pays à travers le monde." AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.