FAVORIT 80850 Dishwasher User information
Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass this User Information on to any subsequent owner of the appliance. 1 3 2 3 2 The following symbols are used in the text: Safety instructions Warning: Notes that concern your personal safety. Attention: Notes that show how to avoid damage to the appliance. Useful tips and hints Environmental information Your dishwasher is fitted with the new “PULSE WASH” dishwashing system.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Diagram of appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation and connection instructions. . . . . . . . . . . . . . . . . 37 Safety information for the installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Installing the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Connecting the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Guarantee Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions 1 Safety Prior to using for the first time • Follow the ”Instructions for installation and connection”. Correct use • The dishwasher is only intended for washing domestic dishes. • Additions or modifications to the dishwasher are not permitted. • Use only special salt, detergent and rinse aid suitable for domestic dishwashers. • Do not put any solvents in the dishwasher. This could cause an explosion. Child safety • Keep packaging away from children. There is a risk of suffocation.
Diagram of appliance Ceiling spray arm Upper basket spray arm and floor spray arm Water hardness dial Dispenser for special salt Dispenser for detergent Dispenser for rinse aid Rating plate Filters Interior lighting 6
Control panel Display Direction buttons ON/OFF button OPTION button RESET button Button OK/START Button functions ON/OFF Direction buttons OPTION RESET OK/START – Switching the appliance on and off – Selecting within the menu – Selecting a value when adjusting options or settings – Changing between Programmes menu and Options menu – while a dishwashing cycle is running: briefly changing the display’s text line from displaying the cycle stage to displaying the dishwashing cycle – – – – cancelling the
Switching on for the first time – setting the language 1. Press the ON/OFF button. First of all HELLO appears in the display. As soon as the dishwasher is ready for use, this is replaced by LANGUAGE ENGLISH; the word ENGLISH is flashing. 2. Using the direction buttons ( or ) select the desired language. 3 3 8 3. Press the OK/START button. This will have changed the display to the desired language. CHOOSE PROGRAMME is shown in the display.
Display Info status bar Text line Symbol line The info status bar consists of a row of individual lamps that is divided into two sections: the left section refers to the Programmes menu, the right section to the Options menu. • In the Programmes and Options menus you can see at what stage within a cycle you currently are (the relevant lamp flashes). • While a dishwashing cycle is running, the info status bar functions as a programme progress display.
Basic operation This section contains basic information regarding the use of your dishwasher. Please read this section very carefully. An overview of the menus Programmes menu Options menu START DELAY AUTOMATIC 30 MINUTES OPTION button 3 IN 1 70° INTENSIVE SETTINGS… 65° NORMAL OK/Start button ENERGY 50° NORMAL 45° GLASS LANGUAGE WATER HARDNESS RINSE AID PREWASH SOUND VOLUME BRIGHTNESS CONTRAST The Programmes menu • After switching on the dishwasher you will find yourself in the Programmes menu.
The Options menu • Here go to the desired setting using the direction buttons ( or ). In the info status bar your position within the menu is always shown. • For the option DELAY START see the section “Setting a delay start” for the option 3 IN 1 see the section “Before using for the first time” • Use the OK/START button to switch from the menu item SETTINGS… to the Settings sub-menu. The Settings sub-menu Here go to the desired setting using the direction buttons ( or ).
Prior to using for the first time 3 1. Set the water softener 2. Fill up with special salt for water softeners 3. Fill up with rinse aid If you wish to use “3in1” detergent, please do the following: – First read the section “Using 3in1 detergents”. – Switch on the dishwasher, go to option 3 IN 1, change value to ON (see section “ Adjusting an option/setting”); symbol lights up in the symbol line. As a result – there is no need to fill up with special salt or rinse aid.
3 Setting electronically: 1. Press the ON/OFF button. If the name of a programme stage is displayed in the display, a dishwashing cycle is active. First of all you must abort the dishwashing cycle: – Press the RESET button. CONFIRM CANCEL? appears in the display. – Press the OK/START button. This cancels the dishwashing cycle. 2. Go to the WATER HARDNESS setting; see section “Adapting an option/ setting”. 3. Set WATER HARDNESS to the right setting.
Adding special salt 3 3 14 To decalcify the water softener, it must be filled up with special salt. Use only special salt suitable for domestic dishwashers. If you do not use 3in1 detergent, fill up with special salt: – Before using the dishwasher for the first time. – If when starting a cycle the message REFILL SALT is displayed. 1. Open the door and remove the lower basket. 2. Screw open the lid on the salt dispenser by turning it anti-clockwise. 3.
Filling up with rinse aid With rinse aid the rinsing water drains away better and so you get smear-free, gleaming dishes and clear glasses. If you do not use 3in1 detergent, fill up with rinse aid: – Before using the dishwasher for the first time. – If when starting a dishwashing cycle the message REFILL RINSE AID is displayed. Use only special rinse aid for dishwashers and no other liquid detergents. 1. Open the door. The rinse aid compartment is located on the inside of the dishwasher door. 2.
Setting the amount of rinse aid required 3 Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dishwashing results are not satisfactory”.) The dosage can be set from 1-6. The dosage is pre-set to “4” in the factory. 1. Open the dishwasher door. 2. Press the release button on the rinse aid compartment. 3. Open the cover. 4. Set the dosage level. 5.
Setting the acoustic signal: 3 In addition to the optical display (e.g. indicating the end of the cycle, errors) you can also choose to set an acoustic signal. 1. Press the ON/OFF button. If the name of a programme stage is displayed in the display, a dishwashing cycle is active. First of all you must abort the dishwashing cycle: – Press the RESET button. CONFIRM CANCEL? appears in the display. – Press the OK/START button. This cancels the dishwashing cycle. 2.
In daily use Loading cutlery and dishes 1 Sponges, cleaning cloths and any other objects that can absorb water must not be washed in the dishwasher. Plastic and Teflon-coated dishes and pans tend to retain water droplets. These dishes and pans therefore do not dry as well as those made of china and stainless steel.
Loading cutlery 1 Warning: Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery rack or in the upper basket because of the risk of injury. Place knives, small spoons and small forks in the cutlery tray which is in the upper basket. Place forks and spoons that do not fit in the cutlery tray in the cutlery basket. To ensure that all items of cutlery in the cutlery basket can be reached by the water, you should: 1.Place the grid insert on the cut- 2.
The cutlery basket can be opened out. Always make sure that you put your hand around both parts of the twopart handle when removing it from the dishwasher. 1. Place the cutlery basket on a table or work surface. 2. Open out the two-part handle. 3. Remove cutlery. Pots, Pans, Large Plates Load larger and heavily soiled dishes and pans in the lower basket. (Max. diameter for plates 29 cm). To make it easier to load larger dishes, all rear plate rests in the lower basket can be folded down.
Cups, Glasses, Coffee Service Load smaller, fragile crockery and long, sharp cutlery in the upper basket. • Arrange items of crockery on and under the folding cup racks so that they are offset from each other and water can reach all items. • The cup racks can be folded up out of the way for tall crockery items. • Lay or hang wine and brandy glasses in the slots in the cup racks. • For glasses with long stems, fold the glass rack to the right, otherwise fold it away to the left.
• The row of spikes on the left of the upper basket is also in two parts and can be folded away. Spikes not folded away: place glasses, mugs etc. in the upper basket. Spikes folded away: More room for serving dishes. Adjusting the height of the upper basket Maximum height of dishes in the 3 Upper basket Lower basket with upper basket raised 22 cm 30 cm with upper basket lowered 24 cm 29 cm The height of the baskets can also be adjusted when they are loaded. Raising/lowering the upper basket 1.
Adding detergent 1 Detergents remove the dirt from dishes and cutlery. The detergent must be added before the cycle starts. Only use detergent intended for domestic dishwashers. The detergent compartment is located on the inside of the door. 1. If the lid is closed: Press the release button. The lid will spring open. 3 2. Place the detergent in the detergent dispenser. The markings indicate the dosing levels for powder detergents: “20/30” corresponds to approx. 20/30 ml of detergent.
Concentrated detergents 2 Today’s detergents for dishwashers are almost exclusively low-alkaline concentrated detergents with natural enzymes in tablet or powder form. Using 50°C dishwashing cycles in conjunction with these concentrated detergents reduces pollution and is good for your dishes, as these dishwashing cycles are specially matched to the dirt-dissolving properties of the enzymes in concentrated detergents.
Selecting the dishwashing cycle (Cycle Table) 13 - 25 Water (litres) 65° NORMAL • • • • ENERGY (50°)5) Dinner service and cookware, temperature- normally soiled sensitive crockery • • • • • 50° NORMAL Dinner service normally soiled and cookware • • • • • 45° GLASS Dessert dishes and coffee lightly soiled service, delicate glassware - • • • PREWASH (cold)6) All types of dishes • - - - - Used dishes that are being stored in the dishwasher and are to be washed later.
3) When using this cycle, only load the dishwasher half full. 4) During the final rinse, the temperature is increased to 68° for 10 minutes to disinfect e.g. babies’ bottles. 5) Test programme for Test Institutes 6) This cycle does not need any detergent. Starting a dishwashing cycle 3 3 3 3 26 1. Check that the spray arms can turn freely. 2. Turn the water tap on fully. 3. Close the door. 4. Press the ON/OFF button. 5. Using the direction buttons ( or ) select the desired cycle.
Interrupting or aborting a dishwashing cycle Only interrupt a dishwashing cycle that is in progress if it is absolutely necessary. 1 Interrupting the dishwashing programme by opening the dishwasher door Hot steam may escape when the door is opened. There is a risk of scalding. 1. Open the door carefully. The dishwashing cycle will stop, in the display: PLEASE CLOSE DOOR 2. Close the door. The cycle will continue. 3 Aborting the dishwashing cycle 1. Press the RESET button.
Cancelling a delay start: You can cancel a delay start that is counting down at any time. 1. Press the RESET button. In the display: CONFIRM CANCEL ? 2. Press the OK/START button. The delay start is cancelled. The dishwasher cycle that is set begins. Switching off the dishwasher Switch off the dishwasher if the messages PROGRAMME END and PLEASE SWITCH OFF are being displayed alternately. With some dishwashing cycles, the drying fan continues to run even after the end of the cycle.
Cleaning the filters 3 The filters must be regularly checked and cleaned. Dirty filters will spoil the wash results. 1. Open the door and remove the lower basket. 2. Turn the handle about ¼ of a turn anticlockwise (A) and remove the filter system (B). 3. Take hold of the coarse and fine filters (1/2) by the handle and remove them from the micro-filter (3). 4. Clean all filters thoroughly under running water. 5.
What to do if … Resetting the language You can reset the language of the display to the factory setting at any time. As well as the language, the CONTRAST and BRIGHTNESS settings are also reset. 1. Press the RESET button repeatedly until the display in the display no longer changes. 2. Press and hold the RESET button for six seconds. In the text line LANGUAGE ENGLISH appears. The word ENGLISH flashes. 3. Using the direction buttons or select the desired language. 4. Press the OK/START button. 5.
Malfunction Possible cause Remedy Water tap is blocked with limescale or faulty. Check the water tap and have it repaired if necessary. The tap is turned off. Turn the tap on. The filter (where present) in Clean the filter in the the threaded hose fitting on threaded hose fitting. the tap is blocked. 1 short warning tone, continuously repeated, can be heard, in the display: OPEN THE Filters in the base of the TAP washing compartment are blocked.
Malfunction The cycle is not starting. Possible cause Remedy The mains plug is not plugged in. Plug in mains plug. A fuse in the house’s wiring Replace fuse. system is defective. For dishwasher models with If the dishes are to be a delay start timer: washed immediately, cancel A start time has been selectthe delay start. ed. Rust spots are visible in the dishwashing compartment. The dishwashing compartment is made from rust-free stainless steel.
The dishes do not dry and are not shining. • Poor quality rinse aid was used. • The rinse aid dispenser is empty. There are smears, streaks, milky spots or a shiny bluish coating on glasses and dishes. • Lower rinse aid dosage. There are dried water drops on the glasses and dishes. • Increase rinse aid dosage. • The detergent may be the cause. Contact the detergent manufacturer's customer advice centre. Glass corrosion • Contact the detergent manufacturer's customer advice centre.
Technical data Capacity: 12 place settings including serving dishes Permitted water pressure: 1-10 bar (=10-100 N/cm2 = 0.1-1.0 MPa) Electrical connection: Information on the electrical connection is given on the rating plate located on the right inner edge of the dishwasher door. Dishwasher: Free-standing appliances 5 34 Dimensions: 850 x 598 x 598 (H x W x D in mm) Max. weight: 54 kg This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.
Notes for Test Institutes Testing in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test cycle (see “Cycle Table”). Tests in accordance with EN 50242 must be carried out when the salt dispenser in the water softener and the rinse aid dispenser have been filled with salt and rinse aid respectively, and using the test cycle (see “Cycle Table”).
Lower basket with cutlery basket 36 Cutlery basket
Installation and connection instructions 1 Safety information for the installation • Only transport the dishwasher in an upright position, otherwise salt water may run out. • Before using the dishwasher for the first time, check for any damage caused in transport. Do not under any circumstances connect an appliance that is damaged. In the case of damage, please contact your supplier.
Installing the dishwasher • The dishwasher must be installed on a firm floor and adjusted to ensure that it is stable and level in all directions. • To compensate for unevenness in the floor and to match the height of the appliance to that of surrounding units, extend the threaded feet using a screwdriver. • The drain hose, inlet hose and mains cable must be laid so that they are able to move freely within the plinth area, and so that they are not kinked or crushed when the dishwasher is in position.
Free-standing appliances 1 If the dishwasher is installed directly next to a cooker, a heat-insulating, non-flammable panel (laminated with aluminium foil on the side next to the cooker) must be fitted flush with the top edge of the work surface (depth 57.5 cm). If the appliance is built-in under a kitchen work surface, the worktop supplied with the dishwasher can be removed in the following way: 1. Unscrew the screws from the elbows at the rear (1). 2.
Connecting the dishwasher Connecting to the water supply • The dishwasher can be connected to cold and hot water supplies up to max. 60°C. • The dishwasher must not be connected to open hot water appliances or instantaneous water heaters. Permitted water pressure Lowest permitted water pressure: 1 bar (=10 N/cm2 =100 kPa) Consult your plumber if the water pressure is less than 1 bar.
Water drainage 1 Drain hose The drain hose must not be kinked, crushed or entangled. Connecting the drain hose: – Maximum permitted height: 1 metre. – Minimum required height: 40 cm above the bottom edge of the appliance. Extension hoses • Extension hoses are available from your dealer or from our Customer Care Department. To ensure that the function of the appliance is not impeded, the internal diameter of extension hoses must be 19 mm.
Water drainage into sink (only possible with free-standing appliances) If you wish to hang the drain hose in a wash basin, use a detachable hose elbow. You can obtain this from AEG customer service by referring to spare part number ET 646 069 190. 1. Fit the elbow to the drain hose. 2. Secure the drain hose so that it cannot slide off the edge of the wash basin. Pass a piece of cord through the hose elbow and fix it to the wall or the tap.
Connecting systems The water inlet hose, drain hose and the mains cable must all be connected to the side of the dishwasher as there is no space for them behind the appliance.
Guarantee Conditions Belgium DECLARATION OF GUARANTEE TERMS. Our appliances are produced with the greatest of care. However, a defect may still occur. Our consumer services department will repair this upon request, either during or after the guarantee period. The service life of the appliance will not, however, be reduced as a result. This declaration of guarantee terms is based on European Union Directive 99/44/EC and the provisions of the Civil Code.
These guarantee terms are only valid for appliances purchased and used in Belgium. For exported appliances, the user must first make sure that they satisfy the technical conditions (e.g.: voltage, frequency, installation instructions, type of gas, etc.) for the country concerned and that they can withstand the local climatic and environmental conditions. For appliances purchased abroad, the user must first ensure that they meet the qualifications required in Belgium.
Customer Service Centres Belgium Electrolux Home Products Belgium ELECTROLUX SERVICE Bergensesteenweg 719 1502 Lembeek Consumer services Tel.: 02/363.04.44 Fax.: 02/363.04.00 02/363.04.60 Weitere Kundendienststellen im Ausland In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können dort eingesehen werden. Further after-sales service agencies overseas In these countries our AEG agents’ own guarantee conditions are applicable. Please obtain further details direct.
U.A.E. Abu Dhabi Universal Trading Company P.O. Box 43 99 Tel.: 335331 Jordan Jordan Household Supply Co. Ltd. P.O. Box 3/68 Amman/Tel.: 69 70 50 Malta ITC International Trading Company White House Building Mountbatte Street Blata L-Bajda/Tel.: 220644 Egypt Middle East Commercial Center P.O. Box 19 Kairo-Heliopolis Tel.: 29917/31634 Canada EURO-LINE Appliances 2150 Winston PARK Drive 20 Oakville, Ontario L6H 5V1 Tel.: 905 829 3980 Fax: 905 829 3985 Mauritius Happy World Centre Ltd. P.O.
Israel Electricity & Electronic Services-Evis LTD. 19 Hataasia st. Raanana, Industrial area 43654 Tel: 972-9-7448118 Fax: 972-9-7603618 e-mail:evis@evis.co.il Malaysia Arzbergh Engineering No. 49A/B, Jalan Petaling Utama 7 4600 Petaling Jaya Tel.: 3 795 1084 Fax: 3 795 1082 Saudi Arabia Alia Trading Corporation P.O. Box 4101 King Abdul Aziz Street Riyadh Tel.: 4645977 Al Nahas Est. Musaidia Market I P.O. Box 1 15 29 Jeddah Tel.: 6606852 Japan Electrolux Japan Ltd.
Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information: – Model description – Product number (PNC) – Serial number (S No.
From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.