Operation Manual

Notes for Test Institutes

Testing in accordance with EN 60704 must be carried out with the

appliance fully loaded and using the test cycle (see “Cycle Table”).

Tests in accordance with EN 50242 must be carried out when the salt

dispenser in the water softener and the rinse aid dispenser have been

filled with salt and rinse aid respectively, and using the test cycle (see

“Cycle Table”).

Sample loading arrangements:

Full load:

12 place settings

including serving

dishes

Half load:

6 place settings including

serving dishes, leaving alter-

nate positions in the rack free

Amount of detergent required: 5g + 25g (Type B) 20g (Type B)

Rinse aid setting: 4 (Type III) 4 (Type III)

Upper basket

*) If necessary, move the cup rack from right to left. When doing this, ensure that the

cup rack is at the same height.