User manual

• A stand pipe with vent-hole. The internal di-

ameter must be minimum 4 cm.

Remove the sink plug when the appliance

drains the water to prevent that the water

goes back into the appliance.

The drain hose extension must not be longer

than 2 m. The internal diameter must not be

smaller than the diameter of the hose.

If you connect the water drain hose to a trap spi-

got under the sink, remove the plastic mem-

brane (A). If you do not remove the membrane,

remaining food can cause a blockage in the

drain hose spigot

A safety device impedes the dirty water to go

back into the appliance. If, the spigot of the sink

has a 'non-return valve', this can cause the appli-

ance to drain incorrectly. Remove the non-re-

turn valve.

max 85 cm

min 40 cm

max 400 cm

Installation