FEE63400PM USER MANUAL RO Manual de utilizare Maşină de spălat vase
www.aeg.com CUPRINS 1. DESCRIEREA PRODUSULUI.............................................................................. 3 2. PANOU DE COMANDĂ........................................................................................ 4 3. PROGRAME......................................................................................................... 5 4. SETĂRI................................................................................................................. 7 5. OPŢIUNI...................
ROMÂNA 1.
www.aeg.com 2. PANOU DE COMANDĂ 1 2 8 1 2 3 4 5 Buton pornire/oprire Buton Program Indicatoare programe Afişaj Buton Delay 3 4 7 5 6 6 Buton Option 7 Indicatoare luminoase 8 Buton Start 2.1 Indicatoare Indicator Descriere Faza de spălare. Se aprinde în momentul derulării fazei de spălare. Faza de clătire. Se aprinde în momentul derulării fazei de clătire. Faza de uscare. Se aprinde în momentul derulării fazei de uscare. Indicator de final ciclu. Indicator TimeSaver. Indicator XtraDry.
ROMÂNA Indicator Descriere Indicator Delay. Indicator ExtraHygiene. 3. PROGRAME Ordonarea programelor din tabel ar putea să nu reflecte ordinea acestora din panoul de comandă.
www.aeg.com Program Grad de murdărire Fazele programului Tip încărcătură Opţiuni • • • Nivel normal sau • redus de • murdărie • Vase din porţe‐ lan delicate şi sticlărie Spălare 45°C Clătiri Uscare XtraDry 1) Acest program oferă cea mai eficientă utilizare a apei şi cel mai eficient consum energetic pentru vase din porţelan şi tacâmuri cu un nivel de murdărie normal. Acesta este programul standard omologat la in‐ stitutele de testare.
ROMÂNA 7 4. SETĂRI Cum se intră în modul utilizator 4.1 Modul de selectare a programului şi modul utilizator Când aparatul este în modul de selectare a programului este posibilă setarea unui program şi intrarea în modul utilizator. Setările disponibile în modul utilizator: • Nivelul dedurizatorului apei în funcţie de duritatea apei. • Activarea sau dezactivarea avertizării notificării de golire a agentului de clătire. • Activarea sau dezactivarea AirDry.
www.aeg.com Grade germane Grade franceze (°dH) (°fH) mmol/l Grade Clar‐ Nivelul dedurizato‐ ke rului apei 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 <0.7 <5 1 2) 1) Setarea din fabrică. 2) Nu utilizaţi sare la acest nivel. Indiferent de tipul de detergent utilizat, setaţi nivelul adecvat de duritate a apei pentru a menţine activ indicatorul de realimentare cu sare.
ROMÂNA 9 Pentru a îmbunătăţi performanţa la uscare, apelaţi la opţiunea XtraDry sau activaţi AirDry. ATENŢIE! Dacă copiii au acces la aparat, se recomandă dezactivarea AirDry deoarece deschiderea uşii poate crea un pericol. Dezactivarea AirDry În timpul fazei de uscare, uşa se deschide automat şi rămâne întredeschisă. ATENŢIE! Nu încercaţi să închideţi uşa aparatului la mai puţin de 2 minute după deschiderea automată. Acest lucru poate cauza deteriorarea aparatului.
www.aeg.com La alte programe, setarea XtraDry este permanentă şi este folosită automat la următoarele cicluri. Această configuraţie poate fi schimbată în orice moment. De fiecare dată când este activat, XtraDry este oprită şi trebuie selectată manual. Activarea XtraDry dezactivează TimeSaver şi invers. Activarea XtraDry Apăsaţi Option până când se aprinde indicatorul . Afişajul indică durata actualizată a programului. 5.2 TimeSaver Această opţiune măreşte presiunea şi temperatura apei.
ROMÂNA 11 6.2 Umplerea dozatorului pentru agent de clătire A DB M AX 4 1 3 2 + - 4. Scuturaţi cu atenţie de mânerul pâlniei pentru a pica şi ultimele granule în interior. 5. Înlăturaţi sarea din jurul orificiului rezervorului pentru sare. C ATENŢIE! Folosiţi numai agent de clătire conceput special pentru maşinile de spălat vase. 6. Rotiţi capacul rezervorului pentru sare spre dreapta pentru a închide rezervorul.
www.aeg.com 7.1 Utilizarea detergentului A B 30 20 C 2. Apăsaţi Program în mod repetat până când se aprinde indicatorul programului dorit. Afişajul indică durata programului. 3. Setaţi opţiunile aplicabile. 4. Apăsaţi Start pentru a porni programul. • Indicatorul fazei în curs de desfăşurare este aprins. • Durata programului începe să scadă în trepte de câte 1 minut. Pornirea unui program cu întârziere ATENŢIE! Folosiţi doar detergent special pentru maşina de spălat vase. 1.
ROMÂNA Nu încercaţi să închideţi uşa aparatului la mai puţin de 2 minute după ce AirDry o deschide automat deoarece se poate deteriora aparatul. Dacă, după aceea, uşa este închisă timp de alte 3 minute, programul aflat în derulare se termină. Anularea pornirii cu întârziere în timpul derulării numărătorii inverse Dacă anulaţi pornirea cu întârziere, programul şi opţiunile trebuie setate din nou. Apăsaţi simultan Delay şi Option până când aparatul este în modul de selectare a programului.
www.aeg.com 8.3 Ce trebuie făcut dacă doriţi să nu mai utilizaţi tablete combinate Înainte de a începe să utilizaţi în mod separat detergent, sare şi agent de clătire efectuaţi următoarea procedură. • • • • Asiguraţi-vă că paharele nu ating alte pahare. Puneţi obiectele mici în coşul pentru tacâmuri. Puneţi obiectele uşoare în coşul superior. Asiguraţi-vă că obiectele nu se mişcă. Asiguraţi-vă că braţul stropitor se poate mişca liber înainte să porniţi un program. 1.
ROMÂNA 15 9.1 Curăţarea filtrelor Sistemul de filtrare este realizat din 3 piese. C B A 1. Rotiţi filtrul (B) în sens antiorar şi scoateţi-l. 5. Asiguraţi-vă că nu există resturi alimentare sau mizerie în sau în jurului marginii colectorului de apă. 6. Puneţi la loc filtrul plat (A). Asiguraţivă că este poziţionat corect sub cele 2 ghidaje. 7. Reasamblaţi filtrele (B) şi (C). 8. Puneţi la loc filtrul (B) în filtrul plat (A). Rotiţi-l în sens orar până când se fixează. 2.
www.aeg.com ATENŢIE! O poziţie incorectă a filtrelor poate cauza rezultate nesatisfăcătoare la spălare şi deteriorarea aparatului. 9.4 Curăţarea interiorului • • 9.2 Curăţarea braţelor stropitoare Nu demontaţi braţele stropitoare. Dacă orificiile din braţele stropitoare sunt înfundate, înlăturaţi resturile de murdărie cu un obiect ascuţit subţire. 9.3 Curăţarea exterioară • • • Curăţaţi aparatul cu o lavetă moale, umedă. Utilizaţi numai detergenţi neutri.
ROMÂNA Problema şi codul alarmei Cauză posibilă şi soluţie Aparatul nu se alimentează cu apă. • • Afişajul indică sau . • • • Aparatul nu evacuează apa. Afişajul indică . • • • • Dispozitivul anti-inundaţie este pornit. 17 Verificaţi dacă robinetul de apă este deschis. Verificaţi dacă presiunea de la reţeaua de alimentare cu apă nu este prea mică. Pentru această informaţie, con‐ tactaţi compania locală de furnizare a apei. Verificaţi dacă robinetul de apă este înfundat.
www.aeg.com Problema şi codul alarmei Cauză posibilă şi soluţie Aparatul declanşează între‐ rupătorul. • Amperajul este insuficient pentru a alimenta simultan toate aparatele aflate în uz. Verificaţi amperajul de la priză şi capacitatea contorului sau opriţi unul dintre apa‐ ratele aflate în uz. Defect electric intern al aparatului. Contactaţi un Centru de service autorizat. • apare din nou, contactaţi un Centru de service autorizat.
ROMÂNA Problemă Cauză posibilă şi soluţie Vasele sunt ude. • • • • • 19 Pentru cea mai bună performanţă la uscare, activaţi opţiunea XtraDry şi setaţi AirDry. Programul nu are fază de uscare sau are o fază de us‐ care la temperatură redusă. Dozatorul pentru agent de clătire este gol. Calitatea agentului de clătire poate fi de vină. Problema poate fi cauzată de calitatea tabletelor com‐ binate.
www.aeg.com Problemă Cauză posibilă şi soluţie Veselă mată, decolorată sau ciobită. • • • Asiguraţi-vă că sunt spălate doar articole care pot fi spălate în maşina de spălat vase. Încărcaţi şi descărcaţi cu atenţie coşul. Consultaţi prospectul despre încărcarea coşului. Puneţi obiectele delicate în coşul superior. Consultaţi „Înainte de prima utilizare”, „Utilizarea zilnică" sau „Informaţii şi sfaturi" pentru alte cauze posibile. 11.
ROMÂNA 21 12. INFORMAŢII TEHNICE SUPLIMENTARE Dimensiuni Lăţime / înălţime / adâncime (mm) 446 / 818 - 898 / 570 Conexiunea la reţeaua elec‐ Tensiune (V) 220 - 240 trică 1) Frecvenţă (Hz) 50 Presiunea de alimentare cu apă Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Alimentarea cu apă Apă rece sau caldă 2) max 60°C 1) Consultaţi plăcuţa cu date tehnice pentru restul valorilor. 2) Dacă apa caldă provine dintr-o sursă alternativă de energie (de ex.
www.aeg.
ROMÂNA 23
156911293-A-402018 www.aeg.