FEE63800PM USER MANUAL DE Benutzerinformation Geschirrspüler
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE............................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................4 3. GERÄTEBESCHREIBUNG........................................................................................... 6 4. BEDIENFELD................................................................................................................7 5.
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com • • • • • • • • • Der Betriebswasserdruck (Mindest- und Höchstdruck) muss zwischen 0.5 (0.05) / 8 (0.8) bar (MPa) liegen Beachten Sie, dass die Höchstzahl an Maßgedecken 13 beträgt. Wenn das Netzkabel beschädigt ist, muss es vom Hersteller, seinem autorisierten Kundenservice oder einer gleichermaßen qualifizierten Person ausgetauscht werden, um Gefahrenquellen zu vermeiden.
DEUTSCH Tragen Sie stets Sicherheitshandschuhe und festes Schuhwerk. • Stellen Sie sicher, dass das Gerät unter und an angrenzenden sicheren Konstruktionen montiert ist. 2.2 Elektrischer Anschluss WARNUNG! Brand- und Stromschlaggefahr. • Das Gerät muss geerdet sein. • Stellen Sie sicher, dass die Daten auf dem Typenschild mit den elektrischen Nennwerten der Netzspannung übereinstimmen. • Schließen Sie das Gerät unbedingt an eine ordnungsgemäß installierte Schutzkontaktsteckdose an.
www.aeg.com 2.5 Entsorgung • Schneiden Sie das Netzkabel ab, und entsorgen Sie es. • Entfernen Sie das Türschloss, um zu verhindern, dass sich Kinder oder Haustiere in dem Gerät einschließen. WARNUNG! Verletzungs- und Erstickungsgefahr. • Trennen Sie das Gerät von der Stromversorgung. 3.
DEUTSCH 4. BEDIENFELD 1 2 3 8 1 2 3 4 5 4 7 Taste „Ein/Aus“ Taste Program Programmkontrolllampen Display Taste Delay 5 6 6 Taste Option 7 Kontrolllampen 8 Taste Start 4.1 Kontrolllampen Kontrolllampe Beschreibung Hauptspülgang. Leuchtet während des Hauptspülgangs auf. Spülgang. Leuchtet während der Spülphase auf. Trockenphase. Leuchtet während der Trocknungsphase auf. Kontrolllampe Programmende. Kontrolllampe TimeSaver. Kontrolllampe XtraDry. Kontrolllampe Klarspülmittel.
www.aeg.com Kontrolllampe Beschreibung Kontrolllampe Sanitize. 5.
DEUTSCH Programm Verschmutzungsgrad Beladung 4) Programmphasen 9 Optionen • Normaler Ver• Vorspülgang • XtraDry schmutzungsgrad • Hauptspülgang 50 • Geschirr und Be°C steck • Spülen • Trocknen 1) Dieses Programm gewährleistet den wirtschaftlichsten Wasser- und Energieverbrauch für normal verschmutztes Geschirr und Besteck. Dies ist das Standardprogramm für Prüfinstitute. 2) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben.
www.aeg.com 6. EINSTELLUNGEN 6.1 Programmwahlmodus und Benutzermodus Wenn sich das Gerät im Programmwahlmodus befindet, kann ein Programm eingestellt und der Benutzermodus aufgerufen werden. Einstellungen, die im Benutzermodus verfügbar sind: • Die Stufe des Wasserenthärters gemäß der Wasserhärte. • Ein- und Ausschalten der Klarspülmittelnachfüllanzeige. • Klarspülmittelstufe gemäß der erforderlichen Dosierung.
DEUTSCH Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol/l 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 <0.7 <5 1 2) 11 Clarke Was- Einstellung für den serhärtegra- Wasserenthärter de 1) Werkseitige Einstellung. 2) Verwenden Sie kein Salz bei diesen Werten.
www.aeg.com – = die Klarspülmittelnachfüllanzeige ist eingeschaltet. 2. Drücken Sie Start zum Ändern der Einstellung. 3. Drücken Sie Ein/Aus zum Bestätigen der Einstellung. 6.4 Klarspülmittelmenge Die Zugabemenge für das Klarspülmittel kann zwischen Stufe 1 (Mindestmenge) und Stufe 6 (Höchstmenge) eingestellt werden. Bei Stufe 0 wird der Klarspülmittel-Dosierer ausgeschaltet und es wird kein Klarspülmittel zugegeben. Werkseitige Einstellung: Stufe 4.
DEUTSCH • Die Kontrolllampen und , erlöschen. • Die Kontrolllampe blinkt weiterhin. • Im Display wird die aktuelle Einstellung angezeigt. = AirDry ist – ausgeschaltet. 13 – = AirDry ist eingeschaltet. 2. Drücken Sie Option zum Ändern der Einstellung. 3. Drücken Sie Ein/Aus zum Bestätigen der Einstellung. 7. OPTIONEN Sie müssen die gewünschten Optionen vor dem Programmstart einschalten. Es ist nicht möglich, Optionen während eines laufenden Programms einoder auszuschalten.
www.aeg.com entsprechende Kontrolllampe nicht oder sie blinkt ein paar Sekunden schnell und erlischt dann. Das Display zeigt die aktualisierte Programmdauer an. 7.3 Sanitize Diese Option bietet bessere Hygieneergebnisse, indem die Temperatur im letzten Spülgang für mindestens 10 Minuten auf 70 °C gehalten wird. So schalten Sie Sanitize ein Drücken Sie Option, bis die Kontrolllampe leuchtet.
DEUTSCH 6. Drehen Sie den Deckel des Salzbehälters im Uhrzeigersinn, um den Salzbehälter zu schließen. VORSICHT! Beim Befüllen des Salzbehälters können Wasser und Salz austreten. Starten Sie nach dem Füllen des Salzbehälters umgehend ein Programm, um Korrosion zu verhindern. 8.2 Füllen des KlarspülmittelDosierers A B C 1. Öffnen Sie den Deckel (C). 2. Füllen Sie den Dosierer (B) mit Klarspülmittel bis zur Marke „MAX“. 3.
www.aeg.com VORSICHT! Achten Sie darauf, dass keine Gegenstände aus dem Korbrahmen ragen, da diese Gegenstände sowie der Comfort Lift Mechanismus beschädigt werden könnten. Der Comfort Lift Mechanismus ermöglich ein Anheben des unteren Korbs (auf die zweite Ablageebene) und ein Absenken, um das Be- und Entladen von Geschirr zu vereinfachen. Be- und Entladen des unteres Korbs: 1. Zum Anheben des Korbs ziehen Sie den Korb am Griff aus dem Geschirrspüler. Verwenden Sie nicht den Auslösegriff.
DEUTSCH Die Funktion schaltet sich in folgenden Fällen ein: • 5 Minuten nach Programmende. • Nach 5 Minuten, wenn das Programm nicht gestartet wurde. Starten eines Programms 1. Drücken Sie die Taste Ein/Aus, um das Gerät einzuschalten. Stellen Sie sicher, dass sich das Gerät im Programmwahlmodus befindet und die Tür geschlossen ist. 2. Drücken Sie Program wiederholt, bis die Kontrolllampe des gewünschten Programms leuchtet. Im Display wird die Programmdauer angezeigt. 3.
www.aeg.com 10. TIPPS UND HINWEISE 10.1 Allgemeines Die folgenden Hinweise stellen optimale Reinigungs- und Trocknungsergebnisse im täglichen Gebrauch sicher, und tragen auch zum Umweltschutz bei. • Schütten Sie größere Lebensmittelreste auf dem Geschirr in den Abfallbehälter. • Spülen Sie das Geschirr nicht von Hand vor. Verwenden Sie bei Bedarf das Vorspülprogramm (wenn verfügbar) oder wählen Sie ein Programm mit Vorspülgang. • Nutzen Sie die Körbe immer ganz aus.
DEUTSCH • Weichen Sie eingebrannte Essensreste ein. • Ordnen Sie hohle Gefäße (z. B. Tassen, Gläser, Pfannen) mit der Öffnung nach unten ein. • Achten Sie darauf, dass Gläser einander nicht berühren. • Ordnen Sie Besteck und kleine Gegenstände in die Besteckschublade ein. • Ordnen Sie leichte Gegenstände im Oberkorb an. Achten Sie darauf, dass diese nicht verrutschen können. • Vergewissern Sie sich, dass sich die Sprüharme ungehindert bewegen können, bevor Sie ein Programm starten. 10.
www.aeg.com 2. Nehmen Sie den Filter (C) aus dem Filter (B). 3. Entfernen Sie den flachen Filter (A). 7. Bauen Sie die Filter (B) und (C) wieder zusammen. 8. Setzen Sie den Filter (B) in den flachen Filter (A) ein. Drehen Sie ihn nach rechts, bis er einrastet. 4. Reinigen Sie die Filter. 5. Achten Sie darauf, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. 6. Setzen Sie den flachen Filter (A) wieder ein.
DEUTSCH 21 11.3 Reinigen der Außenseiten • Reinigen Sie das Gerät mit einem weichen, feuchten Tuch. • Verwenden Sie ausschließlich Neutralreiniger. • Benutzen Sie keine Scheuermittel, scheuernde Reinigungsschwämmchen oder Lösungsmittel. 3. Reinigen Sie den Sprüharm unter fließendem Wasser. Entfernen Sie Verunreinigungen aus den Öffnungen des Sprüharms mit einem spitzen Gegenstand, z.B. einem Zahnstocher. 4.
www.aeg.com selbst beheben können, oder wenden Sie sich an einen autorisierten Kundendienst. WARNUNG! Nicht ordnungsgemäße Reparaturen stellen ein Sicherheitsrisiko für den Benutzer dar. Die Reparaturarbeiten dürfen nur von qualifiziertem Personal durchgeführt werden. Bei manchen Störungen zeigt das Display einen Alarmcode an. Die meisten Störungen, die auftreten, können behoben werden, ohne dass der autorisierte Kundendienst gerufen werden muss.
DEUTSCH Störung und Alarmcode 23 Mögliche Ursache und Abhilfe Während des Betriebs • Das ist normal. So werden optimale Reinigungsergebstoppt und startet das Gerät nisse erzielt und Strom gespart. mehrmals. Das Programm dauert zu lang. • Wählen Sie die TimeSaver-Option, um die Programmdauer zu verkürzen. • Wenn die Zeitvorwahl eingestellt ist, brechen Sie diese ab oder warten Sie, bis sie abgelaufen ist. Die verbleibende Zeit im Display erhöht sich und springt bis kurz vor die Programmende-Zeit.
www.aeg.com 12.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend Störung Mögliche Ursache und Abhilfe Nicht zufriedenstellende Spülergebnisse. • Siehe „Täglicher Gebrauch“, „Tipps und Hinweise“ sowie die Broschüre zum Beladen der Körbe. • Nutzen Sie intensivere Spülprogramme. • Reinigen Sie die Austrittsdüsen der Sprüharme und das Sieb. Siehe „Reinigung und Pflege“. Nicht zufriedenstellende Trocknungsergebnisse. • Das Geschirr stand zu lange im geschlossenen Gerät.
DEUTSCH 25 Störung Mögliche Ursache und Abhilfe Rostspuren am Besteck. • Das Spülwasser enthält zu viel Salz. Siehe „Wasserenthärter“. • Silber- und Edelstahlbesteck wurden zusammen eingeordnet. Ordnen Sie nicht Silber- und Edelstahlbesteck zusammen ein. Am Ende des Programms befinden sich Reinigungsmittelreste im Behälter. • Das Reinigungsmittel-Tab blieb im Behälter stecken und wurde daher nicht vollständig vom Wasser mitgenommen.
www.aeg.com Spannung (V) 220 - 240 Frequenz (Hz) 50 bar (Mindest- und Höchstwert) 0.5 - 8 MPa (Mindest- und Höchstwert) 0.05 - 0.8 Wasserversorgung Kalt- oder Warmwasser 2) max. 60 °C Fassungsvermögen Maßgedecke 13 Leistungsaufnahme Ein-Zustand (W) 5.0 Leistungsaufnahme Aus-Zustand (W) 0.50 Elektrischer Anschluss 1) Wasserdruck 1) Weitere Angaben finden Sie auf dem Typenschild. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B.
DEUTSCH 27
117876331-A-492017 www.aeg.