FES6380XPM USER MANUAL DE Benutzerinformation Geschirrspüler
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE............................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................5 3. PRODUKTBESCHREIBUNG........................................................................................ 6 4. BEDIENFELD................................................................................................................7 5.
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com Bauernhöfe, Personalküchenbereiche in Geschäften, Büros und anderen Arbeitsumfeldern. – Für Gäste in Hotels, Motels, Pensionen und anderen wohnungsähnlichen Räumlichkeiten. Nehmen Sie keine technischen Änderungen am Gerät vor. Der Betriebswasserdruck (Mindest- und Höchstdruck) muss zwischen 0.5 (0.05) / 8 (0.8) bar (MPa) liegen Beachten Sie, dass die Höchstzahl an Maßgedecken 13 beträgt.
DEUTSCH 5 2. SICHERHEITSANWEISUNGEN 2.1 Montage WARNUNG! Die Montage des Geräts darf nur von einer qualifizierten Fachkraft durchgeführt werden. • Entfernen Sie das gesamte Verpackungsmaterial. • Montieren Sie ein beschädigtes Gerät nicht und benutzen Sie es nicht. • Verwenden Sie das Gerät aus Sicherheitsgründen nicht, bevor es in den Einbauschrank gesetzt wird. • Halten Sie sich an die mitgelieferte Montageanleitung. • Seien Sie beim Umsetzen des Gerätes vorsichtig, da es sehr schwer ist.
www.aeg.com • Es kann heißer Dampf aus dem Gerät austreten, wenn Sie die Tür während des Ablaufs eines Programms öffnen. der Steckdose, wenn der Wasserzulaufschlauch beschädigt ist. Wenden Sie sich für den Austausch des Wasserzulaufschlauchs an den autorisierten Kundendienst. 2.5 Service • Wenden Sie sich zur Reparatur des Geräts an den autorisierten Kundendienst. • Verwenden Sie ausschließlich Originalersatzteile. 2.
DEUTSCH 5 6 7 8 9 10 Typenschild Salzbehälter Entlüftung Klarspülmittel-Dosierer Reinigungsmittelfach Comfort Lift Korb 11 12 13 14 Auslösegriff Griff des Unterkorbs Oberkorb Besteckschublade 4. BEDIENFELD 1 2 8 1 2 3 4 5 Taste „Ein/Aus“ Program Taste Programmkontrolllampen Display Delay Taste 3 4 7 5 6 6 Option Taste 7 Kontrolllampen 8 Start Taste 4.1 Kontrolllampen Kontrolllampe Beschreibung Kontrolllampe Salz. Leuchtet, wenn der Salzbehälter nachgefüllt werden muss.
www.aeg.com Kontrolllampe Beschreibung Kontrolllampe Spülphase. Leuchtet während der Spülphase auf. Kontrolllampe Trocknungsphase. Leuchtet während der Trocknungsphase auf. Kontrolllampe Programmende. Leuchtet nach dem Ende des Spülprogramms. Kontrolllampe Delay. Kontrolllampe TimeSaver. Kontrolllampe XtraDry. Kontrolllampe ExtraHygiene. 5. PROGRAMME Die Reihenfolge der Programme in der Tabelle entspricht möglicherweise nicht ihrer Reihenfolge auf dem Bedienfeld.
DEUTSCH Programm 4) Verschmutzungsgrad Beladung Programmphasen Optionen • Normaler oder leichter Verschmutzungsgrad • Empfindliches Geschirr und Gläser • Hauptspülgang 45 °C • Spülen • Trocknen • XtraDry 5) • Vor kurzem be• Hauptspülgang 60 °C nutztes Geschirr • Spülen • Geschirr und Besteck • ExtraHygiene • XtraDry 6) • Normaler Verschmutzungsgrad • Geschirr und Besteck • XtraDry • • • • Vorspülen Hauptspülgang 50 °C Spülen Trocknen 1) Dieses Programm gewährleistet den wirtschaftlichsten W
www.aeg.com Programm1) Wasserverbrauch (l) Energieverbrauch (kWh) Dauer (Min.) 12 - 13 1.1 - 1.3 230 - 250 1) Druck und Temperatur des Wassers, die Schwankungen in der Stromversorgung, die ausgewählten Optionen und die Geschirrmenge können die Werte verändern. 5.2 Informationen für Prüfinstitute Wenn Sie Informationen zur Durchführung von Leistungsprüfungen (z.B.
DEUTSCH 11 Durch die Enthärtung von hartem Wasser erhöht sich der Wasser- und Energieverbrauch und verlängert sich die Programmdauer. Ja höher die Stufe des Wasserenthärters eingestellt ist, desto höher ist der Verbrauch und desto länger die Programmdauer. Wasserhärte Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol / l Clarke Wasserhärtegrade Einstellung des Wasserenthärters 47 - 50 84 - 90 8.4 - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.
www.aeg.com 6.3 Klarspülmittelnachfüllanzeige Das Klarspülmittel ermöglicht das Trocknen des Geschirrs ohne Streifen und Flecken. Es wird automatisch während der heißen Spülphasen abgegeben. Ist das Klarspülmittelfach leer, wird die Klarspülmittelnachfüllanzeige eingeschaltet und weist darauf hin, dass Klarspülmittel nachgefüllt werden sollte. Wenn Sie Multi-Reinigungstabletten verwenden, und die Reinigungsergebnisse zufriedenstellend sind, können Sie die Klarspülmittelnachfüllanzeige ausschalten.
DEUTSCH Während der Trockenphase wird die Tür automatisch geöffnet und bleibt einen Spaltbreit offen. VORSICHT! Versuchen Sie nicht, die Gerätetür innerhalb der ersten 2 Minuten nach der automatischen Öffnung zu schließen. Andernfalls kann das Gerät beschädigt werden. Wird die Tür danach für weitere 3 Minuten geschlossen, wird das laufende Programm beendet. AirDry wird bei allen Programmen mit So schalten Sie AirDry aus Stellen Sie sicher, dass sich das Gerät im Benutzermodus befindet. 1.
www.aeg.com Ist die Option nicht mit einem Programm kombinierbar, leuchtet die entsprechende Kontrolllampe nicht oder sie blinkt ein paar Sekunden schnell und erlischt dann. Die eingeschalteten Optionen können sich auf den Wasser- und Energieverbrauch sowie die Programmdauer auswirken. 7.1 XtraDry Schalten Sie diese Option ein, um die Trocknungsleistung zu erhöhen. Die Option XtraDry bleibt permanent für alle Programme mit Ausnahme von eingeschaltet.
DEUTSCH 15 im Wasserenthärter. Die Spülphase startet erst nach Abschluss dieses Vorgangs. Dieser Vorgang wird regelmäßig wiederholt. 8.1 Salzbehälter VORSICHT! Verwenden Sie ausschließlich speziell für Geschirrspüler bestimmtes grobkörniges Salz. Mit feinem Salz besteht erhöhte Korrosionsgefahr. Das Salz wird für die Regenerierung des Filterharzes im Wasserenthärter und zur Erzielung guter Spülergebnisse im täglichen Gebrauch benötigt.
www.aeg.com 4. Schließen Sie den Deckel. Achten Sie darauf, dass der Deckel einrastet. Füllen Sie den Klarspülmittel-Dosierer, wenn das Schauglas (A) klar ist. 9. TÄGLICHER GEBRAUCH 1. Öffnen Sie den Wasserhahn. 2. Drücken Sie die Taste Ein/Aus, um das Gerät einzuschalten. Stellen Sie sicher, dass sich das Gerät im Programmwahlmodus befindet. • Füllen Sie den Salzbehälter auf, wenn die Kontrolllampe Salz leuchtet. • Leuchtet die Kontrolllampe Klarspülmittel, füllen Sie den Klarspülmittel-Dosierer. 3.
DEUTSCH • Bei voll beladenem Korb drücken Sie den Korb leicht nach unten. • Bei leerem oder halbvollem Korb drücken Sie den Korb nach unten. 9.2 Verwenden des Reinigungsmittels A B 17 3. Stellen Sie die verfügbaren Optionen ein. 4. Drücken Sie Start, um das Programm zu starten. • Die Kontrolllampe für das laufende Programm leuchtet. • Die Programmdauer nimmt in Schritten von jeweils 1 Minute ab. Starten eines Programms mit Zeitvorwahl 1. Wählen Sie ein Programm. 2.
www.aeg.com Abbrechen einer eingestellten Zeitvorwahl während des Countdowns Wenn Sie die eingestellte Zeitvorwahl abbrechen, müssen das Programm und die Optionen erneut eingestellt werden. Halten Sie Delay und Option gleichzeitig gedrückt, bis sich das Gerät im Programmwahlmodus befindet. Abbrechen eines Programms Halten Sie Delay und Option gleichzeitig gedrückt, bis sich das Gerät im Programmwahlmodus befindet.
DEUTSCH mit langen Programmen zu verwenden, damit keine Reinigungsmittel-Rückstände auf dem Geschirr zurückbleiben. • Verwenden Sie nicht mehr als die angegebene Reinigungsmittelmenge. Siehe hierzu die Angaben auf der Reinigungsmittelverpackung. 10.3 Was tun, wenn Sie keine Multi-Reinigungstabletten mehr verwenden möchten Vorgehensweise, um zurück zur separaten Verwendung von Reinigungsmittel, Salz und Klarspülmittel zu kehren: 1. Stellen Sie die höchste Wasserenthärterstufe ein. 2.
www.aeg.com 11. REINIGUNG UND PFLEGE WARNUNG! Schalten Sie das Gerät immer aus und ziehen Sie den Netzstecker aus der Steckdose, bevor Reinigungsarbeiten durchgeführt werden. Achten Sie darauf, dass der Comfort Lift Korb leer und in angehobener Stellung verriegelt ist. 2. Nehmen Sie den Filter (C) aus dem Filter (B). 3. Entfernen Sie den flachen Filter (A). Verschmutzte Siebe und verstopfte Sprüharme wirken sich negativ auf das Spülergebnis aus.
DEUTSCH 7. Bauen Sie die Filter (B) und (C) wieder zusammen. 8. Setzen Sie den Filter (B) in den flachen Filter (A) ein. Drehen Sie ihn nach rechts, bis er einrastet. VORSICHT! Eine falsche Anordnung der Filter führt zu schlechten Spülergebnissen und kann das Gerät beschädigen. 21 3. Reinigen Sie den Sprüharm unter fließendem Wasser. Entfernen Sie Verunreinigungen aus den Öffnungen des Sprüharms mit einem spitzen Gegenstand, z.B. einem Zahnstocher. 4.
www.aeg.com • Benutzen Sie keine Scheuermittel, scheuernde Reinigungsschwämmchen oder Lösungsmittel. 11.4 Reinigung des Geräteinnenraums • Reinigen Sie das Gerät und die Gummidichtung der Tür sorgfältig mit einem weichen, feuchten Tuch. • Verwenden Sie einmal im Monat ein spezielles Reinigungsmittel für Geschirrspüler, um die Leistungsfähigkeit des Geräts zu erhalten. Befolgen Sie sorgfältig die Anweisungen auf der Reinigungsmittelverpackung.
DEUTSCH 23 Störung und Alarmcode Mögliche Ursache und Abhilfe Es läuft kein Wasser in das Gerät. • Stellen Sie sicher, dass der Wasserzulaufhahn geöffnet ist. • Vergewissern Sie sich, dass der Wasserdruck der Wasserversorgung nicht zu niedrig ist. Diese Informationen erhalten Sie von Ihrem lokalen Wasserversorger. • Stellen Sie sicher, dass der Wasserzulaufhahn nicht verstopft ist. • Vergewissern Sie sich, dass das Sieb im Zulaufschlauch nicht verstopft ist.
www.aeg.com Störung und Alarmcode Mögliche Ursache und Abhilfe Klappernde oder schlagende Geräusche aus dem Geräteinneren. • Das Geschirr ist nicht richtig in den Körben eingeordnet. Siehe Broschüre zum Beladen der Körbe. • Achten Sie darauf, dass sich die Sprüharme frei drehen können. Das Gerät löst die Sicherung • Die abgesicherte Stromstärke reicht nicht für den gleichaus. zeitigen Betrieb aller eingeschalteten Geräte. Überprüfen Sie, für welche Stromstärke die Steckdose bzw.
DEUTSCH 25 Störung Mögliche Ursache und Abhilfe Wasserflecken und andere Flecken auf Gläsern und Geschirr. • Die zugegebene Klarspülmittelmenge ist zu niedrig. Stellen Sie eine höhere Klarspülmittelmenge ein. • Die Ursache kann in der Qualität des Klarspülmittels liegen. Das Geschirr ist nass. • Schalten Sie XtraDry und AirDry ein, um die beste Trocknungsleistung zu erzielen. • Das Programm enthält keine Trocknungsphase oder eine Trocknungsphase mit niedriger Temperatur.
www.aeg.com Störung Mögliche Ursache und Abhilfe Kalkablagerungen auf dem Geschirr, im Innenraum und auf der Türinnenseite. • Die Salzmenge ist nicht ausreichend. Überprüfen Sie die Salzkontrolllampe. • Der Deckel des Salzbehälters ist locker. • Ihr Leitungswasser ist hart. Siehe „Wasserenthärter“. • Verwenden Sie Salz und schalten Sie die Regenerierung des Wasserenthärters ein, selbst wenn Sie MultiReinigungstabletten verwenden. Siehe „Wasserenthärter“.
DEUTSCH Energieverbauch im nicht-ausgeschalteten Zustand in W 27 5.0 Wasserverbrauch in Liter/Jahr, auf der Grundlage von 3080 280 Standardreinigungszyklen.
117876363-A-032019 www.aeg.