User manual

– = rinse aid empty
notification activated.
– = rinse aid empty
notification deactivated.
2. Press Start to change the setting.
3. Press on/off to confirm the setting.
6.4 AirDry （空气对流干燥）
AirDry （空气对流干燥） improves the
drying results with less energy
consumption.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry （空气对流干燥） is automatically
activated with all programmes excluding
(if applicable).
To improve the drying performance refer
to the XtraDry （增强烘干） option or
activate AirDry （空气对流干燥）.
CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry （空气对流
干燥） as opening the door
may pose a danger.
How to deactivate AirDry （空
气对流干燥）
Make sure the appliance is in user mode.
1. Press Delay.
• The indicators and
are off.
• The indicator
still flashes.
• The display shows the current
setting:
= AirDry （空气对流干
燥） activated.
2. Press Delay to change the setting:
= AirDry （空气对流干燥）
deactivated.
3. Press on/off to confirm the setting.
7.
OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
The Option （选项） button
toggles between the
available options and their
possible combinations.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
If an option is not applicable
to a programme, the related
indicator is off or it flashes
quickly for a few seconds
and then goes out.
ENGLISH 11