User manual

Activating options can affect
the water and energy
consumption as well as the
programme duration.
7.1 XtraDry （增强烘干）
Activate this option to boost the drying
performance. With XtraDry （增强烘干）
on, the duration of some programmes,
water consumption and the last rinse
temperature can be affected.
XtraDry （增强烘干） is a permanent
option for all programmes other than
and need not to be selected at
every cycle.
In the other programmes the setting of
XtraDry （增强烘干） is permanent and it
is automatically used in next cycles. This
configuration can be changed at any
time.
Every time is
activated, XtraDry （增强烘
干） is off and needs to be
chosen manually.
How to activate XtraDry （增强
烘干）
Press Option（选项） until the indicator
is on.
The display shows the updated
programme duration.
7.2 ExtraHygiene
This option provides better hygiene
results by keeping the temperature at 70
°C for at least 10 minutes during the last
rinsing phase.
How to activate ExtraHygiene
Press Option（选项） until the indicator
is on.
The display shows the updated
programme duration.
8. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
After starting a programme, it may take
up to 5 minutes for the appliance to
recharge the resin in the water softener.
It seems that the appliance is not
working. The washing phase starts only
after this procedure is completed. The
procedure is repeated periodically.
8.1 The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (only for the first time).
3. Fill the salt container with 1 kg of salt
(until it is full).
www.aeg.com
12