Technical data

10
Downdraught Extractor
1. To turn the downdraught extractor
on, press
k
.
2. To select the height position, press
m
.
The downdraught extractor will
move to middle position and switch
on at extraction rate 1.
To turn the downdraught extractor
off, hold
l
down until bottom
position has been reached.
Pressing
k
will turn extraction off,
but the downdraught extractor will
remain where it is and not descend
into the worktop.
Height positions
Installation beside electrical appli-
ances
The downdraught extractor is
variable between the middle and top
position.
Raising
The downdraught extractor is
switched on.
Select the height position within 10
seconds.
1. Press
m
.
The downdraught extractor will
move to middle position. The
dampers are deployed.
2. Press
m
again.