User manual

16
When the time set has passed, suc-
tion strength is switched off. The
downdraught extractor remains in
the height position set.
If you want to switch off the extrac-
tion rate before the time has passed,
press the
A
button until the display
shows “00”.
Autostop
If the downdraught extractor is left
on by mistake, Autostop will turn
extraction off automatically after 6
hours. The downdraught extractor
will remain at the height position to
which it was set.
When Autostop has been active, the
control lamp for
k
flashes.
Press
k
to reset Autostop.
25
3. Fitting the cover plate
Fit the cover plate as follows:
1. Position the cover plate against the glass on the top cabinet.
2. Position the cover plate against the top cabinet.
3. Mark the four holes on the top cabinet, using the cover plate as a template.
4. Remove the cover plate and drill the four marked holes with a 3.2mm drill.
5. Take the backing off the tape.
6. Lay the cover plate against the top cabinet and press firmly into place.
7. Fix the plate through the four holes with the supplied blind rivets.
The downdraught extractor must not be used beside a gas unit if air
recirculation is chosen for the kitchen.