User Manual

The sensor fields have to be touched

for at least 1 second before they are

activated.

Grill

How to use

Touch controls

Never turn the grill on

before the grill pan has been

put in and the grill rack is in

place. Never leave the appli-

ance unattended when

grilling or melting fat, paraf-

fin wax or other easily ignit-

ed substances.

Never leave paper, dish

cloths, aluminium foil or

any other easily ignited

materials in the immediate

vicinity of the grill. The grill

gets hot enough to ignite

flammable materials. In case

of fire, turn off all control

knobs and switch off any

cooker hood. Put out the fire

with a lid, and never use

water. Check that the grill is

turned off when not in use.

To optimise joints between the installed hobs, the gap between the ceramic hob

may be grouted with silicone:

1. Remove the aluminium panels from the hobs.

2. Apply a stripe of silicone to the gap between the two ceramic hob. Use only

the silicone supplied, as it is designed to tolerate the appliance’s high temper-

ature. (Fig. 1)

3. Splash a little soapy water (washing-up liquid) on the silicone stripe

4. Press the rubber block hard against the ceramic hob and pull it slowly from

back to front (Fig. 2)

5. Leave the silicone to harden until the next day.

6. Remove surplus silicone coating from the ceramic hob with the razorblade

supplied. Be careful not to damage the silicone in the gap. Run tools only

along the joint, never across it.

7. Polish the ceramic hob with the supplied cleaning product for ceramic hobs.