INSTRUCTION BOOK FM 4803K-an GB 325 88-8327 rev.
Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new appliance efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference. Should the appliance be transferred to a new owner please ensure this instruction book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.
Contents Page no. For the User Your New Appliance ........................................................................................ Safety Information .......................................................................................... Product Description ........................................................................................ Ceramic Hob .......................................................................................... Induction........................................
Contents Page no. For the Installer Unpacking ........................................................................................................ Technical Specifications .................................................................................. Installation........................................................................................................ Mounting ..........................................................................................................
Safety Information Exclusions This guarantee does not cover: · Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. · Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom. · Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
Customer Care For general enquires concerning your AEG appliance or for further information on AEG products, please contact our Customer Care Department at the address below or visit our website at www.aeg.co.uk Disposal Help prevent accidents when disposing of the product. Remove the cable from the wall plug and cut off the cable close to the product.
Product Description Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning: 1. Cooking zone Ø 140 mm, 1400 W. 2. Cooking zone Ø 210 mm, 2200 W, 3000 W power. 3. Control panel 1 08705 929 929 Your call will automatically be routed to the Service Centre covering your post code area.
Ceramic hob Ceramic glass is insensitive to temperature shock and very robust: however it is not unbreakable. Especially sharp and hard objects that fall on the cooking surface can damage it. Induction When you switch on a zone, a highfrequency magnetic field is formed between the induction coil and the magnetic base of the pan. This magnetic field contains induction currents.
What to do if... If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. IMPORTANT: If you call out an engineer to a fault caused by incorrect use or installation, a charge will be made even if the aookuabce is under guarantee. Problems Remedy The hob doesn’t work............. Check that the hob is switched on. Check the HPFI/HFI relay in the main fuse box. Check the fuses for the hob. The hob gets hot.................
Before Use Overview of the outside width of the units Protect the ceramic hob Before using the hob for the first time, clean off any manufacturing residues such as dust, dirt etc. Apply a protective coating on the ceramic hob before you use it. This way it becomes easier to clean the glass and you prevent any spillage from burning. 180 mm Downdraft 360 mm Glass ceramic hob with 2 cooking zones Gas hob with 2 burners Induction hob with 2 cooking zones Grill Grill / Fryer Wok This is what you do: 1.
How to use To optimise joints between the installed hobs, the gap between the ceramic hob may be grouted with silicone: 1. Remove the aluminium panels from the hobs. 2. Apply a stripe of silicone to the gap between the two ceramic hob. Use only the silicone supplied, as it is designed to tolerate the appliance’s high temperature. (Fig. 1) 3. Splash a little soapy water (washing-up liquid) on the silicone stripe 4.
Touch Controls The sensor fields must be touched for minimum 1 sec. before activation. Cooking Zones The cooking zones can be adjusted from 0-9, where 9 is the highest setting. 1. Press the button. l k m button to set or the 2. Press the desired zone. Adjustment of the zones must take less than 10 seconds, otherwise the cooking section will turn off again.
Turn off a single zone by pressing the or buttons until the display shows “0”. You can turn off a zone quickly by pressing the and buttons simultaneously. Mounting more than one hob m l m Distance to wall: Min. 150 mm (flammable material) l Turn off all zones by pressing the button. k Distance to wall: Min. 50 mm (non-flammable material) m 0m 49 Reinforcement beam Residual Heat Indicator Each cooking zone has a residual heat indicator.
Power Cutting Out Switching on power You can switch the front cooking zone to extra heat for a maximum of 10 minutes . When mounting this unit: Read the instructions on this page. When mounting the hob together with other units: Read the instructions on the next page. 1. Press the k knob. For mounting the hob you need a Philips screwdriver and the 4 clamping fittings supplied with this product (see fig.). 2. Set the cooking zone to level “9” or button. by pressing the 3. Press the l m P button.
Automax Installation in cupboard WITHOUT oven With AUTOMAX you do not need to turn down the temperature. When using AUTOMAX the zone gets full heat for a certain amount of time where after the cooking zone automatically adjusts to the setting you have chosen. To ensure the necessary air supply to the appliance, the top of any floor cupboard must be removed. If this is not done, the air supply will be correspondingly reduced and the guarantee will be invalid.
Mounting The unit may be mounted in any type of kitchen worktop with a thickness of 28 to 40 mm. AUTOMAX Settings Food types Steaks Cooking process Quick frying Schnitzels Meat balls Fried eggs Sausages Frying Pancakes Fritters Gentle frying Potatoes Vegetables Notes A7-A8 2½ mins Fry 3-4 min per side depending on thickness. Turn regularly A6-A7 1½-2 mins 360 mm HOB 1 BUNDHYLDE 49 mm min.
Installation Safety Switch-off Electrical Installation If one of the keys are activated for more than 10 seconds (e.g. by a child, pot spillage etc.) the hob is automatically switched off. Installation may only be performed by a qualified electrician or a person authorised by the manufacturer. Work performed by an unqualified person may cause injury or damages to property and deteriorate the hob. Autostop Connecting the Appliance Single phase Type of cable: 2,5 mm2 twin and earth.
Technical Data Model FM 4803K-an: Activating the Child Safety Device Product measurements: Width: 360 mm Depth: 520 mm Height: 49 mm With the child safety function children can be prevented from turning on the hob unintentionally. When the child safety is activated you can still use the key and the minute minder. k Build-in measurements: Width: 340 mm Depth: 490 mm Height: 38 mm Activating the Child Safety Device 1.
Unpacking Cancelling the Child Safety Check that the appliance has no faults and is undamaged on delivery. k key. Push the j key for 3 seconds. 1. Push the 2. Transport Damages The control lamp for child safety turns off. Any damages resulting from a transport which you have not performed yourself must be communicated to the dealer within one week of receipt of the product. On the rating plate which is placed on the back of the product you will find the CE marking and the product’s serial number.
Cleaning and Maintenance Minute Minder Aluminium Setting the Minute Minder Carry out daily cleaning with a well wrung-out cloth. For more stubborn soiling, use a cloth or a soft plastic sponge together with washing-up liquid or all-purpose cleaner. The minute minder can only be used when the timer is not in use. 1. Turn on the hob, push A. Push the l or m key till the 2. Push once on 3. k. 4.
Advise and Tips for Using the Cooking Zones ! By using below advise you can save energy and ease cleaning. ! ! Use close-fitting lids on the pans. Failure to use a lid on a pan uses over three times as much electricity. ! ! ! Save water: Boil in as little water as possible. Cook potatoes and vegetables in 1, 2 or 3 dl water. Use 1 dl water for the 14 cm zone. Use 3 dl water for the 21 cm zone. Cover the pan with a close-fitting lid.
Both cooking zones can be set simultaneously with two different timings. When both cooking zones have a setting the time for the individual cooking zone is read in the following way: Size of pots The zones automatically adapt their size to the base of the cooking utensil, within certain limits. The pots must have a definite minimum size, which will depend on the diameter of the zone, otherwise the zone will not turn on.
Both cooking zones can be set simultaneously with two different timings. When both cooking zones have a setting the time for the individual cooking zone is read in the following way: Size of pans The zones automatically adapt their size to the base of the cooking utensil, within certain limits. The pans must have a definite minimum size, which will depend on the diameter of the zone, otherwise the zone will not turn on.
Advise and Tips for Using the Cooking Zones ! By using the advise below you can save energy and ease cleaning. ! ! Use close-fitting lids on the pans. Failure to use a lid on a pan uses over three times as much electricity. ! ! ! Save water: Boil in as little water as possible. Cook potatoes and vegetables in 1, 2 or 3 dl water. Use 1 dl water for the 14 cm zone. Use 3 dl water for the 21 cm zone. Cover the pan with a close-fitting lid.
Cleaning and Maintenance Minute Minder Aluminium Setting the Minute Minder Carry out daily cleaning with a well wrung-out cloth. For more stubborn soiling, use a cloth or a soft plastic sponge together with washing-up liquid or all-purpose cleaner. The minute minder can only be used when the timer is not in use. 1. Turn on the hob, push A. Push the l or m key till the 2. Push once on 3. k. 4.
Unpacking Check that the appliance has no faults and is undamaged on delivery. De-activating the Child Safety k key. Push the j key for 3 seconds. 1. Push the 2. Transport Damages The control lamp for child safety turns off. Any damages resulting from a transport which you have not performed yourself must be communicated to the dealer within one week of receipt of the product. On the rating plate which is placed on the back of the product you will find the CE marking and the product’s serial number.
Technical Data Model FM 4803K-an: Activating the Child Safety Device Product measurements: Width: 360 mm Depth: 520 mm Height: 49 mm With the child safety function children can be prevented from turning on the hob unintentionally. When the child safety is activated you can still use the key and the minute minder. k Build-in measurements: Width: 340 mm Depth: 490 mm Height: 38 mm Activating the Child Safety Device 1.
Installation Safety Switch-off Electrical Installation If one of the keys are activated for more than 10 seconds (e.g. by a child, pot spillage etc.) the hob is automatically switched off. Installation may only be performed by a qualified electrician or a person authorised by the manufacturer. Work performed by an unqualified person may cause injury or damages to property and deteriorate the hob. Autostop Connecting the Appliance Single phase Type of cable: 2,5 mm2 twin and earth.
Mounting AUTOMAX Settings Time to automatic cutout Notes A7-A8 2½ mins Fry 3-4 min per side depending on thickness.
Automax Installation in cupboard WITHOUT oven With AUTOMAX you do not need to turn down the temperature. When using AUTOMAX the zone gets full heat for a certain amount of time where after the cooking zone automatically adjusts to the setting you have chosen. To ensure the necessary air supply to the appliance, the top of any floor cupboard must be removed. If this is not done, the air supply will be correspondingly reduced and the guarantee will be invalid.
Power Cutting Out Switching on power You can switch the front cooking zone to extra heat for a maximum of 10 minutes . When mounting this unit: Read the instructions on this page. When mounting the hob together with other units: Read the instructions on the next page. 1. Press the k knob. For mounting the hob you need a Philips screwdriver and the 4 clamping fittings supplied with this product (see fig.). 2. Set the cooking zone to level “9” or button. by pressing the 3. Press the l m P button.
Turn off a single zone by pressing the or buttons until the display shows “0”. You can turn off a zone quickly by pressing the and buttons simultaneously. Mounting more than one hob m l m Distance to wall: Min. 150 mm (flammable material) l Turn off all zones by pressing the button. k Distance to wall: Min. 50 mm (non-flammable material) m 0m 49 Reinforcement beam Residual Heat Indicator Each cooking zone has a residual heat indicator.
Mounting: When mounting several hobs together you must use a reinforcement beam between each hob as well as the silicone supplied with the hobs (see fig.) Finger Touch The keys are to be touched for minimum 1 sec. before activation. 1. Cut a hole of the calculated size in the table top 2. Place the individual hobs upside down on a mat. Take care that the top side is not scratched. 3. Mount the clamping fittings in the holes in the side of the base panels (see fig.) 4. Place the first hob in the hole. 5.
How to use To optimise joints between the installed hobs, the gap between the ceramic hob may be grouted with silicone: 1. Remove the aluminium panels from the hobs. 2. Apply a stripe of silicone to the gap between the two ceramic hob. Use only the silicone supplied, as it is designed to tolerate the appliance’s high temperature. (Fig. 1) 3. Splash a little soapy water (washing-up liquid) on the silicone stripe 4.
Before Use Overview of the outside width of the units Protect the ceramic hob Before using the hob for the first time it must be cleaned for manufacturing residues such as dust, dirt etc. Apply a protective coating on the ceramic hob before you use it. This way it becomes easier to clean the glass and you prevent any spillage from burning.
What to do if... If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. IMPORTANT: If you call out an engineer to a fault caused by incorrect use or installation, a charge will be made even if the aookuabce is under guarantee. Problems Remedy The hob doesn’t work............. Check that the hob is switched on. Check the HPFI/HFI relay in the main fuse box. Check the fuses for the hob. The hob gets hot.................
Ceramic hob Ceramic glass is insensitive to temperature shock and very robust: however it is not unbreakable. Especially sharp and hard objects that fall on the cooking surface can damage it. Induction When you switch on a zone, a highfrequency magnetic field is formed between the induction coil and the magnetic base of the pan. This magnetic field contains induction currents.
Product Description Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning: 1. Cooking zone Ø 140 mm, 1400 W. 2. Cooking zone Ø 210 mm, 2200 W, 3000 W power. 3. Control panel 1 08705 929 929 Your call will automatically be routed to the Service Centre covering your post code area.
Customer Care For general enquires concerning your AEG appliance or for further information on AEG products, please contact our Customer Care Department at the address below or visit our website at www.aeg.co.uk Disposal Help prevent accidents when disposing of the product. Remove the cable from the wall plug and cut off the cable close to the product.
Safety Information Exclusions This guarantee does not cover: · Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. · Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom. · Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new appliance efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference. Should the appliance be transferred to a new owner please ensure this instruction book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.
Contents Page no. For the Installer Unpacking ........................................................................................................ Technical Specifications .................................................................................. Installation........................................................................................................ Mounting ..........................................................................................................
Contents Page no. For the User Your New Appliance ........................................................................................ Safety Information .......................................................................................... Product Description ........................................................................................ Ceramic Hob .......................................................................................... Induction........................................
INSTRUCTION BOOK FM 4803K-an GB 325 88-8327 rev.
