INSTRUCTION BOOK FM 6300G-an GB 325 88-8281 rev.
Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new appliance efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference. Should the appliance be transferred to a new owner please ensure this instruction book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.
Contents Page no. For the User Exclusions This guarantee does not cover: · Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. · Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom. · Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
Contents Page no. For the Installer Unpacking ........................................................................................................ Technical Data.................................................................................................. Important safety requirements ...................................................................... Installation........................................................................................................ Mounting ...................
Safety Information Service and Spare Parts Work performed by unskilled persons may lead to injuries and or damages and deteriorate the appliance. Interference with the appliance during the warranty period may only be performed by our service centre or by an organisation approved by our service centre.
What to do if... If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. Installation Installation of the cooker hob may only be carried out by a Corgi registered installer. Work carried out by unqualified persons could lead to personal injury or damage to property, and spoil the hob itself. During installation make sure the electricity cable is not pinched.
Product Description Overview of the outside width of the units 1. Large burner 2. Medium burner 3. Medium burner 4. Small burner 5. Control panel 180 mm Downdraft 360 mm Glass ceramic hob with 2 cooking zones Gas hob with 2 burners Induction hob with 2 cooking zones Grill Grill / Fryer Wok 1 2 3 4 5 Control Panel 580 mm Glass ceramic hob with 4 cooking zones Gas hob with 4 burners 1 3 2 1. Control knob for rear left-hand burner 2. Control knob for rear right-hand burner 3.
To optimise joints between the installed hobs, the gap between the ceramic hob may be grouted with silicone: Ceramic hob Ceramic glass is insensitive to temperature shock and very robust: however it is not unbreakable. Especially sharp and hard objects that fall on the cooking surface can damage it. Burners The burners are made up of a burner body, a burner ring and a burner cap. Each burner has electrical ignition which means you do not need matches to light it. Each burner has a safety device.
Before Use Mounting: When mounting several hobs together you must use a reinforcement beam between each hob as well as the silicone supplied with the hobs (see fig.) 1. Cut a hole of the calculated size in the table top 2. Place the individual hobs upside down on a mat. Take care that the top side is not scratched. 3. Mount the clamping fittings in the holes in the side of the base panels (see fig.) 4. Place the first hob in the hole. 5. Apply silicone to the two corners joining the next hob (see fig.
How to use Mounting more than one hob Ceramic hob Never use a cracked ceramic hob. Water could boil over and/or cleaning agents penetrate into the live electrical parts. Switch off the power to the appliance and contact Service. Never leave the hob unattended when deep frying or melting fat, paraffin wax or other easily ignited substances. Never leave paper, dish cloths, aluminium foil or any other easily ignited materials in the immediate vicinity of the hob.
Burners However, to ensure accessibility to the gas connection there should generally be at least 50 mm between the rear of the hole for the gas hob and the wall behind it. Burner ring Right Make quite sure the burner ring and burner cap are positioned correctly over the burner top. 1. Cut a hole in the worktop of the given dimensions, see “Technical data”, “installation dimensions”. 2. Place the hob upside down on a soft underlay. Make sure not to scratch the top surface. 3.
Mounting While the control knob is held down, sparks will be formed. This is done by the electrical ignition which lights the gas without your having to use matches. If no electrical connection is possible, you can light the gas with matches. The hob can be installed in any type of kitchen worktop with a thickness of 28-40 mm. However, if an oven is to be installed beneath it, the worktop must be at least 40 mm thick.
Electronic Control Advice and tips on use of burners Cable type 0.75 mm2 HO5 VV-F Installation must comply with any special requirements laid down by the local energy provider. The product must be connected via an external switch with a contact gap of at least 3 mm. (May be the main switch). L L2 L1 N Follow the advice below to save energy and make cleaning easier. N ! PE 20 The pans must match the burners. At setting the flame must remain approx. 1 cm inside the edge of the pan.
Cleaning and Maintenance For hygienic and safety reasons, keep the burners clean. Grease splashes and spilt food will give off fumes when heated and in the worst case can lead to a fire. 3. Wipe the hob clean with a damp cloth or kitchen paper. Stubborn stains can be removed by rubbing hard with the cleaning agent sprinkled on a piece of kitchen paper. 4. Wipe off excess cleaning agent with a damp cloth. Aluminium Carry out daily cleaning with a well wrung-out cloth.
Important safety requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). This hob must be installed by qualified personnel to the relevant British Standards. Any gas installation must be carried out by a CORGI registered installer. Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions.
Unpacking Technical Data Check that the appliance has no faults and is undamaged on delivery. This gas appliance is CE-approved and CE-marked in accordance with the Gas Appliance Directive (90/396/EEC, Low Voltage Directive (73/23/EEC) and the EMC Directive (89/336/EEC as amended). Transport Damages Approval authority: Any damages resulting from a transport which you have not performed yourself must be communicated to the dealer within one week of receipt of the product.
Unpacking Technical Data Check that the appliance has no faults and is undamaged on delivery. This gas appliance is CE-approved and CE-marked in accordance with the Gas Appliance Directive (90/396/EEC, Low Voltage Directive (73/23/EEC) and the EMC Directive (89/336/EEC as amended). Transport Damages Approval authority: Any damages resulting from a transport which you have not performed yourself must be communicated to the dealer within one week of receipt of the product.
Important safety requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). This hob must be installed by qualified personnel to the relevant British Standards. Any gas installation must be carried out by a CORGI registered installer. Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions.
Cleaning and Maintenance For hygienic and safety reasons, keep the burners clean. Grease splashes and spilt food will give off fumes when heated and in the worst case can lead to a fire. 3. Wipe the hob clean with a damp cloth or kitchen paper. Stubborn stains can be removed by rubbing hard with the cleaning agent sprinkled on a piece of kitchen paper. 4. Wipe off excess cleaning agent with a damp cloth. Aluminium Carry out daily cleaning with a well wrung-out cloth.
Electronic Control Advice and tips on use of burners Cable type 0.75 mm2 HO5 VV-F Installation must comply with any special requirements laid down by the local energy provider. The product must be connected via an external switch with a contact gap of at least 3 mm. (May be the main switch). L L2 L1 N Follow the advice below to save energy and make cleaning easier. N ! PE 20 The pans must match the burners. At setting the flame must remain approx. 1 cm inside the edge of the pan.
Mounting While the control knob is held down, sparks will be formed. This is done by the electrical ignition which lights the gas without your having to use matches. If no electrical connection is possible, you can light the gas with matches. The hob can be installed in any type of kitchen worktop with a thickness of 28-40 mm. However, if an oven is to be installed beneath it, the worktop must be at least 40 mm thick.
Burners However, to ensure accessibility to the gas connection there should generally be at least 50 mm between the rear of the hole for the gas hob and the wall behind it. Burner ring Right Make quite sure the burner ring and burner cap are positioned correctly over the burner top. 1. Cut a hole in the worktop of the given dimensions, see “Technical data”, “installation dimensions”. 2. Place the hob upside down on a soft underlay. Make sure not to scratch the top surface. 3.
How to use Mounting more than one hob Ceramic hob Never use a cracked ceramic hob. Water could boil over and/or cleaning agents penetrate into the live electrical parts. Switch off the power to the appliance and contact Service. Never leave the hob unattended when deep frying or melting fat, paraffin wax or other easily ignited substances. Never leave paper, dish cloths, aluminium foil or any other easily ignited materials in the immediate vicinity of the hob.
Before Use Mounting: When mounting several hobs together you must use a reinforcement beam between each hob as well as the silicone supplied with the hobs (see fig.) 1. Cut a hole of the calculated size in the table top 2. Place the individual hobs upside down on a mat. Take care that the top side is not scratched. 3. Mount the clamping fittings in the holes in the side of the base panels (see fig.) 4. Place the first hob in the hole. 5. Apply silicone to the two corners joining the next hob (see fig.
To optimise joints between the installed hobs, the gap between the ceramic hob may be grouted with silicone: Ceramic hob Ceramic glass is insensitive to temperature shock and very robust: however it is not unbreakable. Especially sharp and hard objects that fall on the cooking surface can damage it. Burners The burners are made up of a burner body, a burner ring and a burner cap. Each burner has electrical ignition which means you do not need matches to light it. Each burner has a safety device.
Product Description Overview of the outside width of the units 1. Large burner 2. Medium burner 3. Medium burner 4. Small burner 5. Control panel 180 mm Downdraft 360 mm Glass ceramic hob with 2 cooking zones Gas hob with 2 burners Induction hob with 2 cooking zones Grill Grill / Fryer Wok 1 2 3 4 5 Control Panel 580 mm Glass ceramic hob with 4 cooking zones Gas hob with 4 burners 1 3 2 1. Control knob for rear left-hand burner 2. Control knob for rear right-hand burner 3.
What to do if... If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. Installation Installation of the cooker hob may only be carried out by a Corgi registered installer. Work carried out by unqualified persons could lead to personal injury or damage to property, and spoil the hob itself. During installation make sure the electricity cable is not pinched.
Safety Information Service and Spare Parts Work performed by unskilled persons may lead to injuries and or damages and deteriorate the appliance. Interference with the appliance during the warranty period may only be performed by our service centre or by an organisation approved by our service centre.
Contents Page no. For the Installer Unpacking ........................................................................................................ Technical Data.................................................................................................. Important safety requirements ...................................................................... Installation........................................................................................................ Mounting ...................
Contents Page no. For the User Exclusions This guarantee does not cover: · Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. · Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom. · Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new appliance efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference. Should the appliance be transferred to a new owner please ensure this instruction book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.
INSTRUCTION BOOK FM 6300G-an GB 325 88-8281 rev.
