FSE63600P DE IT USER MANUAL Benutzerinformation Geschirrspüler Istruzioni per l’uso Lavastoviglie 2 27
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE............................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................5 3. PRODUKTBESCHREIBUNG........................................................................................ 6 4. BEDIENFELD................................................................................................................7 5.
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com Bauernhöfe, Personalküchenbereiche in Geschäften, Büros und anderen Arbeitsumfeldern. – Für Gäste in Hotels, Motels, Pensionen und anderen wohnungsähnlichen Räumlichkeiten. Nehmen Sie keine technischen Änderungen am Gerät vor. Der Betriebswasserdruck (Mindest- und Höchstdruck) muss zwischen 0.5 (0.05) / 8 (0.8) bar (MPa) liegen Beachten Sie, dass die Höchstzahl an Maßgedecken 13 beträgt.
DEUTSCH 5 2. SICHERHEITSANWEISUNGEN 2.1 Montage WARNUNG! Die Montage des Geräts darf nur von einer qualifizierten Fachkraft durchgeführt werden. • Entfernen Sie das gesamte Verpackungsmaterial. • Montieren Sie ein beschädigtes Gerät nicht und benutzen Sie es nicht. • Verwenden Sie das Gerät aus Sicherheitsgründen nicht, bevor es in den Einbauschrank gesetzt wird. • Halten Sie sich an die mitgelieferte Montageanleitung. • Seien Sie beim Umsetzen des Gerätes vorsichtig, da es sehr schwer ist.
www.aeg.com • Drehen Sie sofort den Wasserhahn zu und ziehen Sie den Netzstecker aus der Steckdose, wenn der Wasserzulaufschlauch beschädigt ist. Wenden Sie sich für den Austausch des Wasserzulaufschlauchs an den autorisierten Kundendienst. 2.4 Gebrauch • Laden Sie keine entflammbaren Produkte oder Gegenstände, die mit entflammbaren Produkten benetzt sind, in das Gerät und stellen Sie solche nicht in die Nähe oder auf das Gerät. • Geschirrspüler-Reinigungsmittel sind gefährlich.
DEUTSCH 5 6 7 8 9 Typenschild Salzbehälter Entlüftung Klarspülmittel-Dosierer Reinigungsmittelfach 10 Besteckkorb 11 Unterkorb 12 Oberkorb 3.1 Beam-on-Floor Nach dem Abschalten des Gerätes erlischt der Beamon-Floor. Der Beam-on-Floor ist ein Lichtstrahl, der unterhalb der Gerätetür auf den Boden projiziert wird. Wird AirDry während der Trockenphase eingeschaltet, ist die Projektion auf dem Boden möglicherweise nicht vollständig sichtbar.
www.aeg.com 5. PROGRAMME Die Nummerierung der Programme in der Tabelle (P1, P2 usw.) entspricht ihrer Reihenfolge auf dem Bedienfeld. Die Reihenfolge der Programme in der Tabelle entspricht möglicherweise nicht ihrer Reihenfolge auf dem Bedienfeld.
DEUTSCH Programm P6 6) Verschmutzungsgrad Beladung Programmphasen Optionen • Normaler Verschmutzungsgrad • Geschirr und Besteck • • • • • XtraDry Vorspülen Hauptspülgang 50 °C Spülen Trocknen 1) Dieses Programm gewährleistet den wirtschaftlichsten Wasser- und Energieverbrauch für normal verschmutztes Geschirr und Besteck. Dies ist das Standardprogramm für Prüfinstitute. 2) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben.
www.aeg.com 5.2 Informationen für Prüfinstitute Wenn Sie Informationen zur Durchführung von Leistungsprüfungen (z.B. gemäß EN60436) benötigen, schicken Sie eine E-Mail an: Geben Sie in Ihrer Anfrage den Produktnummerncode (PNC) an, den Sie auf dem Typenschild finden. Bezüglich anderer Fragen zu Ihrem Geschirrspüler siehe die mit dem Gerät gelieferte Bedienungsanleitung. info.test@dishwasher-production.com 6. EINSTELLUNGEN 6.
DEUTSCH 11 Wasserhärte Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol / l Clarke Wasserhärtegrade Einstellung des Wasserenthärters 47 - 50 84 - 90 8.4 - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.
www.aeg.com Ausschalten der Klarspülmittelnachfüllanzeige Stellen Sie sicher, dass sich das Gerät im Benutzermodus befindet. 1. Drücken Sie . • Die Kontrolllampen und , , erlöschen. • Die Kontrolllampe blinkt weiterhin. • Im Display wird die aktuelle Einstellung angezeigt. bei Stufe 0A kein Klarspülmittel zugegeben wird. 2. Drücken Sie wiederholt zum Ändern der Einstellung. 3. Drücken Sie Ein/Aus zum Bestätigen der Einstellung. 6.
DEUTSCH 13 Zur Verbesserung der Trocknungsleistung beachten Sie die XtraDry-Option oder schalten Sie AirDry ein. VORSICHT! Haben Kinder Zugang zum Gerät, wird empfohlen AirDry auszuschalten, da das Öffnen der Tür eine Gefahr darstellen könnte. Ausschalten von AirDry Während der Trockenphase wird die Tür automatisch geöffnet und bleibt einen Spaltbreit offen. VORSICHT! Versuchen Sie nicht, die Gerätetür innerhalb der ersten 2 Minuten nach der automatischen Öffnung zu schließen.
www.aeg.com Ist die Option nicht mit einem Programm kombinierbar, leuchtet die entsprechende Kontrolllampe nicht oder sie blinkt ein paar Sekunden schnell und erlischt dann. Die eingeschalteten Optionen können sich auf den Wasser- und Energieverbrauch sowie die Programmdauer auswirken. 7.1 XtraDry Schalten Sie diese Option ein, um die Trocknungsleistung zu erhöhen. 7.2 TimeSaver Mit dem TimeSaver können Sie die Dauer des gewählten Programms um etwa 50% verkürzen.
DEUTSCH im Wasserenthärter. Die Spülphase startet erst nach Abschluss dieses Vorgangs. Dieser Vorgang wird regelmäßig wiederholt. 8.1 Salzbehälter VORSICHT! Verwenden Sie ausschließlich speziell für Geschirrspüler bestimmtes grobkörniges Salz. Mit feinem Salz besteht erhöhte Korrosionsgefahr. Das Salz wird für die Regenerierung des Filterharzes im Wasserenthärter und zur Erzielung guter Spülergebnisse im täglichen Gebrauch benötigt. 15 6.
www.aeg.com 9. TÄGLICHER GEBRAUCH 1. Öffnen Sie den Wasserhahn. 2. Drücken Sie die Taste Ein/Aus, um das Gerät einzuschalten. Stellen Sie sicher, dass sich das Gerät im Programmwahlmodus befindet. • Füllen Sie den Salzbehälter auf, wenn die Kontrolllampe Salz leuchtet. • Leuchtet die Kontrolllampe Klarspülmittel, füllen Sie den Klarspülmittel-Dosierer. 3. Beladen Sie die Körbe. 4. Füllen Sie Reinigungsmittel ein. 5. Stellen Sie je nach Beladung und Verschmutzungsgrad das passende Programm ein. 9.
DEUTSCH den Betrieb ab dem Zeitpunkt der Unterbrechung fort. Wird die Tür länger als 30 Sekunden während der Trockenphase geöffnet, wird das laufende Programm beendet. Dies geschieht nicht, wenn die Tür durch die Funktion AirDry geöffnet wird. Abbrechen einer eingestellten Zeitvorwahl während des Countdowns Wenn Sie die eingestellte Zeitvorwahl abbrechen, müssen das Programm und die Optionen erneut eingestellt werden. Halten Sie RESET gedrückt, bis sich das Gerät im Programmwahlmodus befindet.
www.aeg.com 10.2 Gebrauch von Salz, Klarspül- und Reinigungsmittel 6. Schalten Sie die Klarspülmittelnachfüllanzeige ein. • Verwenden Sie nur Salz, Klarspülmittel und Reinigungsmittel für Geschirrspüler. Andere Produkte können das Gerät beschädigen. • Wir empfehlen in Bereichen mit hartem und sehr hartem Wasser Reinigungsmittel ohne Zusätze (Pulver, Gel oder Tabs ohne Zusätze), Klarspülmittel und Salz getrennt zu verwenden, um optimale Reinigungsund Trocknungsergebnisse zu erzielen.
DEUTSCH 10.6 Entladen der Körbe 1. Lassen Sie das Geschirr abkühlen, bevor Sie es aus dem Gerät nehmen. Heißes Geschirr ist stoßempfindlich. 2. Entladen Sie zuerst den Unter- und dann den Oberkorb. 19 Nach Abschluss des Programms kann sich noch Wasser an den Innenseiten des Geräts befinden. 11. REINIGUNG UND PFLEGE WARNUNG! Schalten Sie das Gerät immer aus und ziehen Sie den Netzstecker aus der Steckdose, bevor Reinigungsarbeiten durchgeführt werden.
www.aeg.com 5. Achten Sie darauf, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. 6. Setzen Sie den flachen Filter (A) wieder ein. Stellen Sie sicher, dass er korrekt unter den beiden Führungen eingesetzt wurde. Verstopfte Löcher können die Ursache für nicht zufriedenstellende Spülergebnisse sein. 7. Bauen Sie die Filter (B) und (C) wieder zusammen. 8. Setzen Sie den Filter (B) in den flachen Filter (A) ein. Drehen Sie ihn nach rechts, bis er einrastet.
DEUTSCH 11.3 Reinigen der Außenseiten • Reinigen Sie das Gerät mit einem weichen, feuchten Tuch. • Verwenden Sie ausschließlich Neutralreiniger. • Benutzen Sie keine Scheuermittel, scheuernde Reinigungsschwämmchen oder Lösungsmittel. 21 • Verwenden Sie einmal im Monat ein spezielles Reinigungsmittel für Geschirrspüler, um die Leistungsfähigkeit des Geräts zu erhalten. Befolgen Sie sorgfältig die Anweisungen auf der Reinigungsmittelverpackung.
www.aeg.com Störung und Alarmcode Mögliche Ursache und Abhilfe Das Programm startet nicht. • Achten Sie darauf, dass die Gerätetür geschlossen ist. • Wenn die Zeitvorwahl eingestellt ist, brechen Sie diese ab, oder warten Sie, bis sie abgelaufen ist. • Das Gerät regeneriert das Harz im Wasserenthärter. Dieser Vorgang dauert ca. 5 Minuten. Es läuft kein Wasser in das Gerät. • Stellen Sie sicher, dass der Wasserzulaufhahn geöffnet ist.
DEUTSCH 23 Störung und Alarmcode Mögliche Ursache und Abhilfe Die Gerätetür ist schwer zu schließen. • Das Gerät ist nicht ausgerichtet. Schrauben Sie die Schraubfüße weiter hinein oder weiter heraus (falls vorhanden). • Teile des Geschirrs ragen aus den Körben heraus. Klappernde oder schlagende Geräusche aus dem Geräteinneren. • Das Geschirr ist nicht richtig in den Körben eingeordnet. Siehe Broschüre zum Beladen der Körbe. • Achten Sie darauf, dass sich die Sprüharme frei drehen können.
www.aeg.com Störung Mögliche Ursache und Abhilfe Weiße Streifen oder blau schimmernder Belag auf Gläsern und Geschirr. • Die zugegebene Klarspülmittelmenge ist zu hoch. Stellen Sie eine geringere Klarspülmittelmenge ein. • Die Reinigungsmittelmenge ist zu hoch. Wasserflecken und andere Flecken auf Gläsern und Geschirr. • Die zugegebene Klarspülmittelmenge ist zu niedrig. Stellen Sie eine höhere Klarspülmittelmenge ein. • Die Ursache kann in der Qualität des Klarspülmittels liegen.
DEUTSCH 25 Störung Mögliche Ursache und Abhilfe Kalkablagerungen auf dem Geschirr, im Innenraum und auf der Türinnenseite. • Die Salzmenge ist nicht ausreichend. Überprüfen Sie die Salzkontrolllampe. • Der Deckel des Salzbehälters ist locker. • Ihr Leitungswasser ist hart. Siehe „Wasserenthärter“. • Verwenden Sie Salz und schalten Sie die Regenerierung des Wasserenthärters ein, selbst wenn Sie MultiReinigungstabletten verwenden. Siehe „Wasserenthärter“.
www.aeg.com Energieverbauch im nicht-ausgeschalteten Zustand in W 5.0 Wasserverbrauch in Liter/Jahr, auf der Grundlage von 2940 280 Standardreinigungszyklen.
ITALIANO 27 INDICE 1. INFORMAZIONI DI SICUREZZA...............................................................................28 2. ISTRUZIONI DI SICUREZZA...................................................................................... 30 3. DESCRIZIONE DEL PRODOTTO............................................................................. 31 4. PANNELLO DEI COMANDI......................................................................................32 5. PROGRAMMI.................................
1. www.aeg.com INFORMAZIONI DI SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. I produttori non sono responsabili di eventuali lesioni o danni derivanti da un'installazione o un uso scorretti. Conservare sempre le istruzioni in un luogo sicuro e accessibile per poterle consultare in futuro. 1.
ITALIANO clienti di hotel, motel, bed and breakfast e altri ambienti residenziali. Non modificare le specifiche tecniche dell'apparecchiatura. La pressione di esercizio dell'acqua (minima e massima) deve essere compresa tra 0.5 (0.05) / 8 (0.8) bar (MPa) Rispettare il numero massimo di 13 coperti. Se il cavo di alimentazione è danneggiato, deve essere sostituito dal produttore, dal Centro di Assistenza Autorizzato o da una persona qualificata per evitare situazioni di pericolo.
www.aeg.com 2. ISTRUZIONI DI SICUREZZA 2.1 Installazione AVVERTENZA! L’installazione dell'apparecchiatura deve essere eseguita da personale qualificato. • Rimuovere tutti i materiali di imballaggio. • Non installare o utilizzare l'apparecchiatura se è danneggiata. • Non usare l'apparecchiatura prima di installarla nella struttura a incasso date le misure di sicurezza. • Attenersi alle istruzioni fornite insieme all'apparecchiatura.
ITALIANO 2.4 Utilizzare 2.5 Assistenza tecnica • Non appoggiare o tenere liquidi o materiali infiammabili, né oggetti facilmente incendiabili sull'apparecchiatura, al suo interno o nelle immediate vicinanze. • I detersivi per la lavastoviglie sono pericolosi. Attenersi alle istruzioni di sicurezza riportate sulla confezione del detersivo. • Non bere o giocare con l’acqua all’interno dell’apparecchiatura. • Non rimuovere i piatti dall'apparecchiatura fino al completamento del programma.
www.aeg.com 9 Erogatore del detersivo 10 Cestello per le posate 11 Cestello inferiore 12 Cestello superiore 3.1 Beam-on-Floor Quando viene attivato AirDry durante la fase di asciugatura, la proiezione sul pavimento potrebbe non essere completamente visibile. Per vedere se il ciclo si è concluso, controllare il pannello di controllo. Il Beam-on-Floor è un fascio di luce mostrato sul pavimento al di sotto della porta dell'apparecchiatura.
ITALIANO 33 5. PROGRAMMI La numerazione dei programmi nella tabella (P1, P2, ecc.) ne riflette la sequenza sul pannello dei comandi. L'ordine dei programmi nella tabella potrebbe non rifletterne la sequenza sul pannello dei comandi.
www.aeg.com 5.1 Valori di consumo Acqua (l) Energia (kWh) Durata (min.) P1 10.5 0.821 235 P2 8 - 15 0.7 - 1.7 46 - 170 P3 12.5 - 14.5 1.4 - 1.7 170 - 190 P5 12 - 14 0.8 - 1.0 82 - 92 P4 10 0.9 30 P6 12 - 13 1.1 - 1.3 230 - 250 Programma 1) 1) I valori possono variare a seconda della pressione e della temperatura dell'acqua, delle variazioni dell'alimentazione elettrica, delle opzioni selezionate e della quantità di stoviglie. 5.
ITALIANO sui risultati di lavaggio e sull'apparecchiatura. Dopo l'attivazione, l'apparecchiatura si trova di default in modalità di selezione programma. In caso contrario, impostare la modalità di selezione programma come segue: La durezza dell'acqua dipende dal contenuto di questi minerali. La durezza dell'acqua è misurata in scale equivalenti. Tenere premuto RESET finché l’apparecchiatura entra in modalità di selezione programma.
www.aeg.com Come impostare il livello del decalcificatore Verificare che l'apparecchiatura sia in modalità utente. 1. Premere . , • Le spie spente. , e sono lampeggia • L'indicatore ancora. • Il display mostra l'impostazione attuale: ad esempio 5. = livello ripetutamente per 2. Premere cambiare l'impostazione. 3. Premere On/Off per confermare l'impostazione. 6.
ITALIANO C'è inoltre un segnale acustico che viene emesso al termine del programma. Per impostazione predefinita, questo segnale acustico è disattivato ma è possibile attivarlo. Come attivare il segnale acustico per la fine del programma Verificare che l'apparecchiatura sia in modalità utente. 1. Premere • Le spie spente. . , , e sono lampeggia ancora. • La spia • Il display mostra l'impostazione attuale. – = il segnale acustico è disattivato. – = il segnale acustico è attivato. per cambiare 2.
www.aeg.com 7. OPZIONI Le opzioni desiderate devono essere attivate ogni volta prima dell'avvio di un programma. Non è possibile attivare o disattivare le opzioni durante l'esecuzione di un programma. L'attivazione dell'opzione XtraDry disattiva TimeSaver e viceversa. Come attivare XtraDry Premere . La spia relativa è accesa. Il display indica la durata aggiornata del programma. Non tutte le opzioni sono compatibili tra loro.
ITALIANO regolare il livello del decalcificatore dell'acqua. 2. Riempire il contenitore del sale. 3. Riempire il contenitore del brillantante. 4. Aprire il rubinetto dell’acqua. 5. Avviare un programma per rimuovere possibili residui di lavorazione presenti all’interno dell’apparecchiatura. Non usare detersivo e non mettere i piatti nei cestelli. Dopo aver avviato il programma l'apparecchiatura ricarica la resina nel decalcificatore dell'acqua per un tempo massimo di 5 minuti.
www.aeg.com 2. Riempire il contenitore (B) finché il brillantante non raggiunge l'indicazione di "MAX". 3. Rimuovere l'eventuale brillantante fuoriuscito con un panno assorbente, per evitare che si formi troppa schiuma. 4. Chiudere il coperchio. Assicurarsi che il coperchio si blocchi in posizione. Riempire il contenitore del brillantante quando la spia (A) è trasparente. 9. UTILIZZO QUOTIDIANO 1. Aprire il rubinetto dell’acqua. 2. Premere il tasto On/Off per accendere l’apparecchiatura.
ITALIANO Appena è completato il conto alla rovescia, il programma si avvia. Apertura della porta durante il funzionamento dell'apparecchiatura Aprendo la porta mentre è in corso un programma, l’apparecchiatura si arresta. Ciò può influenzare il consumo di energia e la durata del programma. Dopo la chiusura della porta, l'apparecchiatura riprende dal punto in cui era stata interrotta. Se la porta rimane aperta per più di 30 secondi durante la fase di asciugatura, il programma in corso termina.
www.aeg.com • Selezioni un programma conformemente al tipo di carico e al livello di sporcizia. offre l'uso più efficace dell'acqua e del consumo energetico. 10.2 Se si utilizzano sale, brillantante e detersivo • Utilizzare soltanto sale, brillantante e detersivo specifici per lavastoviglie. Altri prodotti possono danneggiare l'apparecchiatura.
ITALIANO 10.6 Scaricare i cestelli 43 Dopo aver completato il programma l'acqua può restare sulle superfici interne dell'apparecchiatura. 1. Lasciare raffreddare i piatti prima di estrarli dall'apparecchiatura. Le stoviglie calde possono essere più facilmente danneggiabili. 2. Vuotare prima il cestello inferiore e quindi quello superiore. 11. MANUTENZIONE E PULIZIA AVVERTENZA! Prima di eseguire qualunque intervento di manutenzione, spegnere l'apparecchiatura ed estrarre la spina dalla presa.
www.aeg.com 7. Rimontare i filtri (B) e (C). 8. Posizionare nuovamente il filtro (B) nel filtro piatto (A). Ruotarlo in senso orario finché non si blocca in posizione. ATTENZIONE! Un’errata posizione dei filtri può comportare scadenti risultati di lavaggio e danni all’apparecchiatura. 3. Lavare il mulinello sotto l'acqua corrente. Utilizzare un oggetto sottile appuntito, ad es. uno stuzzicadenti, per rimuovere i residui di sporco dai fori. 4.
ITALIANO 11.4 Pulizia interna • Pulire accuratamente l'apparecchiatura, inclusa la guarnizione in gomma della porta, con un panno morbido umido. • Per mantenere al meglio le prestazioni dell'apparecchiatura, si consiglia di utilizzare un prodotto specifico per la pulizia per lavastoviglie almeno una volta al mese. Seguire attentamente le indicazioni riportate sulle confezioni dei prodotti.
www.aeg.com Problema e codice allarme Possibile causa e soluzione L'apparecchiatura non scarica l'acqua. • Controllare che lo scarico del lavello non sia ostruito. • Controllare che il filtro nel tubo di scarico non sia ostruito. • Controllare che il sistema del filtro interno non sia ostruito. • Verificare che il tubo di scarico non sia attorcigliato o piegato. Il display visualizza . Il dispositivo antiallagamento è attivo.
ITALIANO Fare riferimento a "Preparazione al primo utilizzo", "Utilizzo quotidiano" o "Consigli e suggerimenti" per altre possibili cause. 47 ricomparsa dell'anomalia, contattare il Centro di Assistenza Autorizzato. Per i codici allarme non presenti in tabella, contattare un Centro di Assistenza Autorizzato. Una volta controllata l'apparecchiatura, spegnerla e riaccenderla. In caso di 12.
www.aeg.com Problema Possibile causa e soluzione Le stoviglie sono bagnate. • Per ottenere le migliori prestazioni di asciugatura, attivare XtraDry e AirDry. • Il programma non dispone di una fase di asciugatura oppure questa fase viene eseguita a bassa temperatura. • Il contenitore del brillantante è vuoto. • La causa potrebbe essere la qualità del brillantante. • La causa potrebbe essere la qualità del detersivo in pastiglie multifunzione.
ITALIANO Problema 49 Possibile causa e soluzione Il calcare può depositarsi su • Il livello di sale è basso. Controllare l'indicatore del sapentole e stoviglie, nella vasca le. o all'interno della porta. • Il tappo del contenitore del sale è lento. • L'acqua di rubinetto è dura. Fare riferimento a "Decalcificatore dell'acqua". • Usare il sale e impostare la rigenerazione dell'addolcitore dell'acqua anche se vengono usate pastiglie multi-funzione. Fare riferimento a "Decalcificatore dell'acqua".
www.aeg.com Consumo energetico nel modo spento (W) 0.50 Consumo energetico nel modo lasciato acceso (W) 5.0 Consumo di acqua in litri/anno, basato su 280 cicli di la- 2940 vaggio standard.
ITALIANO 51
117886124-A-072019 www.aeg.