FSE63600P DE IT USER MANUAL Benutzerinformation Geschirrspüler Istruzioni per l’uso Lavastoviglie 2 27
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE............................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................4 3. GERÄTEBESCHREIBUNG........................................................................................... 6 4. BEDIENFELD................................................................................................................7 5.
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com • • • • • • • • • Der Betriebswasserdruck (Mindest- und Höchstdruck) muss zwischen 0.5 (0.05) / 8 (0.8) bar (MPa) liegen Beachten Sie, dass die Höchstzahl an Maßgedecken 13 beträgt. Wenn das Netzkabel beschädigt ist, muss es vom Hersteller, seinem autorisierten Kundenservice oder einer gleichermaßen qualifizierten Person ausgetauscht werden, um Gefahrenquellen zu vermeiden.
DEUTSCH Tragen Sie stets Sicherheitshandschuhe und festes Schuhwerk. • Stellen Sie sicher, dass das Gerät unter und an angrenzenden sicheren Konstruktionen montiert ist. 2.2 Elektrischer Anschluss WARNUNG! Brand- und Stromschlaggefahr. • Das Gerät muss geerdet sein. • Stellen Sie sicher, dass die Daten auf dem Typenschild mit den elektrischen Nennwerten der Netzspannung übereinstimmen. • Schließen Sie das Gerät unbedingt an eine ordnungsgemäß installierte Schutzkontaktsteckdose an.
www.aeg.com 2.5 Service • Wenden Sie sich zur Reparatur des Geräts an einen autorisierten Kundendienst. • Verwenden Sie ausschließlich Originalersatzteile. • Trennen Sie das Gerät von der Stromversorgung. • Schneiden Sie das Netzkabel ab, und entsorgen Sie es. • Entfernen Sie das Türschloss, um zu verhindern, dass sich Kinder oder Haustiere in dem Gerät einschließen. 2.6 Entsorgung WARNUNG! Verletzungs- und Erstickungsgefahr. 3.
DEUTSCH • Bei einer Störung des Geräts blinkt der rote Lichtstrahl. Wird AirDry während der Trockenphase eingeschaltet, ist die Projektion auf dem Boden möglicherweise nicht vollständig sichtbar. Sie können dann auf dem Bedienfeld sehen, ob das Programm beendet wurde. Nach dem Abschalten des Gerätes erlischt der Beamon-Floor. 4.
www.aeg.
DEUTSCH 5.1 Verbrauchswerte Wasserverbrauch (l) Energieverbrauch (kWh) Dauer (Min.) P1 10.5 0.832 225 P2 7 - 14 0.6 - 1.6 40 - 154 P3 12.5 - 14.5 1.4 - 1.7 160 - 170 P5 12 - 14 0.7 - 0.9 84 - 94 P4 10 0.9 30 P6 9 - 10 1.1 - 1.3 219 - 229 Programm1) 1) Druck und Temperatur des Wassers, die Schwankungen in der Stromversorgung, die ausgewählten Optionen und die Geschirrmenge können die Werte verändern. 5.
www.aeg.com Halten Sie Reset gedrückt, bis sich das Gerät im Programmwahlmodus befindet. auf die Spülergebnisse und das Gerät auswirken könnten. Aufrufen des Benutzermodus Je höher der Mineralgehalt ist, um so härter ist das Wasser. Die Wasserhärte wird in gleichwertigen Einheiten gemessen. Stellen Sie sicher, dass sich das Gerät im Programmwahlmodus befindet. Der Enthärter muss entsprechend der Wasserhärte in Ihrem Gebiet eingestellt werden.
DEUTSCH Einstellen des Wasserenthärters 1. Drücken Sie 1. Drücken Sie . • Die Kontrolllampen und . • Die Kontrolllampen Stellen Sie sicher, dass sich das Gerät im Benutzermodus befindet. , , erlöschen. und 11 , , erlöschen. • Die Kontrolllampe blinkt weiterhin. • Im Display wird die aktuelle Einstellung angezeigt. – = die Klarspülmittelnachfüllanzeige ist ausgeschaltet. – = = die Klarspülmittelnachfüllanzeige ist eingeschaltet. 2. Drücken Sie wiederholt zum Ändern der Einstellung. 3.
www.aeg.com 3. Drücken Sie Ein/Aus zum Bestätigen der Einstellung. 6.5 Signaltöne Bei einer Störung des Geräts ertönen akustische Signale. Es ist nicht möglich, diese Signaltöne auszuschalten. Es ertönt auch ein Signalton, wenn das Programm beendet ist. Standardmäßig ist dieser Signalton ausgeschaltet, es ist jedoch möglich, ihn einzuschalten. So schalten Sie den Signalton für das Programmende ein Stellen Sie sicher, dass sich das Gerät im Benutzermodus befindet. 1. Drücken Sie .
DEUTSCH 13 7. OPTIONEN Sie müssen die gewünschten Optionen vor dem Programmstart einschalten. Es ist nicht möglich, Optionen während eines laufenden Programms einoder auszuschalten. Nicht alle Optionen lassen sich miteinander kombinieren. Wenn Sie Optionen eingeschaltet haben, die nicht miteinander kombinierbar sind, schaltet das Gerät automatisch eine oder mehrere von ihnen aus. Es leuchten dann nur die Kontrolllampen der noch eingeschalteten Optionen. 7.
www.aeg.com Das Display zeigt die aktualisierte Programmdauer an. 8. VOR DER ERSTEN INBETRIEBNAHME 1. Prüfen Sie, ob die Einstellung des Wasserenthärters der Wasserhärte in Ihrem Gebiet entspricht. Wenn nicht, stellen Sie die Wasserenthärterstufe ein. 2. Füllen Sie den Salzbehälter. 3. Füllen Sie den KlarspülmittelDosierer. 4. Öffnen Sie den Wasserhahn. 5. Starten Sie ein Programm, um Fertigungsrückstände, die sich möglicherweise noch im Gerät befinden können, zu beseitigen.
DEUTSCH 8.2 Füllen des KlarspülmittelDosierers A B Tuch auf, um zu große Schaumbildung zu vermeiden. 4. Schließen Sie den Deckel. Achten Sie darauf, dass der Deckel einrastet. Füllen Sie den Klarspülmittel-Dosierer auf, wenn die Füllstandsanzeige für den Klarspüler (A) durchsichtig wird. Wenn Sie MultiReinigungstabletten verwenden und die Trocknungsleistung zufriedenstellend ist, kann die Klarspülernachfüllanzeige ausgeschaltet werden.
www.aeg.com VORSICHT! Verwenden Sie nur Reinigungsmittel für Geschirrspüler. 1. Drücken Sie die Entriegelungstaste (A), um den Deckel (C) zu öffnen. 2. Füllen Sie das Reinigungsmittel ein oder legen Sie eine Reinigungstablette in den Behälter (B). 3. Wenn das Programm einen Vorspülgang hat, schütten Sie eine kleine Menge Reinigungsmittel auf die Innenseite der Gerätetür. 4. Schließen Sie den Deckel. Achten Sie darauf, dass der Deckel einrastet. 9.
DEUTSCH Bevor Sie ein neues Programm starten, stellen Sie sicher, dass der Reinigungsmittelbehälter gefüllt ist. Programmende Wenn das Programm beendet ist, zeigt das Display 0:00 an und die Kontrolllampe leuchtet. 17 1. Drücken Sie die Taste Ein/Aus oder warten Sie, bis das Gerät über die Funktion Auto Off automatisch ausgeschaltet wird. Wenn Sie die Tür öffnen, bevor die Funktion Auto Off eingeschaltet wird, wird das Gerät automatisch ausgeschaltet. 2. Schließen Sie den Wasserhahn.
www.aeg.com 3. Starten Sie das kürzeste Programm mit einer Spülphase. Verwenden Sie kein Reinigungsmittel und beladen Sie die Körbe nicht. 4. Stellen Sie den Wasserenthärter nach Ablauf des Programms auf die Wasserhärte in Ihrer Region ein. 5. Stellen Sie die Menge des Klarspülmittels ein. 6. Schalten Sie die Klarspülmittelnachfüllanzeige ein. 10.4 Beladen der Körbe • Spülen Sie im Gerät nur spülmaschinenfestes Geschirr.
DEUTSCH 19 C B A 1. Drehen Sie den Filter (B) nach links und nehmen Sie ihn heraus. 2. Nehmen Sie den Filter (C) aus dem Filter (B). 3. Entfernen Sie den flachen Filter (A). 4. Reinigen Sie die Filter. 5. Achten Sie darauf, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. 6. Setzen Sie den flachen Filter (A) wieder ein. Stellen Sie sicher, dass er korrekt unter den beiden Führungen eingesetzt wurde. 7. Bauen Sie die Filter (B) und (C) wieder zusammen.
www.aeg.com VORSICHT! Eine falsche Anordnung der Filter führt zu schlechten Spülergebnissen und kann das Gerät beschädigen. 11.2 Reinigen des oberen Sprüharms Wir empfehlen den oberen Sprüharm regelmäßig zu reinigen, um zu verhindern, dass Verunreinigungen die Löcher verstopfen. Verstopfte Löcher können die Ursache für nicht zufriedenstellende Spülergebnisse sein. 1. Ziehen Sie den Oberkorb bis zum Anschlag heraus. 2.
DEUTSCH • Benutzen Sie keine Scheuermittel, scheuernden Reinigungsschwämmchen, scharfen Gegenstände, starken Chemikalien, Schaber oder Lösungsmittel. 21 • Wenn Sie regelmäßig Kurzprogramme verwenden, können diese zu Fett- und Kalkablagerungen im Gerät führen. Schalten Sie mindestens zweimal im Monat ein langes Programm ein, um die Ablagerungen zu verhindern. 12.
www.aeg.com Störung und Alarmcode Mögliche Ursache und Abhilfe Das Gerät pumpt das Wasser nicht ab. • Stellen Sie sicher, dass der Siphon nicht verstopft ist. • Vergewissern Sie sich, dass das Sieb im Ablaufschlauch nicht verstopft ist. • Vergewissern Sie sich, dass das interne Siebsystem nicht verstopft ist. • Vergewissern Sie sich, dass der Ablaufschlauch nicht geknickt oder zu stark gekrümmt ist. Im Display erscheint . Das Wasserauslauf-Schutzsystem ist eingeschaltet.
DEUTSCH Siehe „Vor der ersten Inbetriebnahme“, „Täglicher Gebrauch“ oder „Tipps und Hinweise“ bezüglich anderer möglicher Ursachen. 23 Problem erneut auf, wenden Sie sich an einen autorisierten Kundendienst. Wenden Sie sich an einen autorisierten Kundendienst, wenn Alarmcodes angezeigt werden, die nicht in der Tabelle angegeben sind. Schalten Sie nach der Überprüfung das Gerät aus und wieder ein. Tritt das 12.
www.aeg.com Störung Mögliche Ursache und Abhilfe Das Geschirr ist nass. • Schalten Sie die Option XtraDry ein, und stellen Sie AirDry ein, um die beste Trocknungsleistung zu erzielen. • Das Programm enthält keine Trocknungsphase oder eine Trocknungsphase mit niedriger Temperatur. • Der Klarspülmittel-Dosierer ist leer. • Die Ursache kann in der Qualität des Klarspülmittels liegen. • Die Ursache kann in der Qualität der Multi-Reinigungstabletten liegen.
DEUTSCH 25 Störung Mögliche Ursache und Abhilfe Kalkablagerungen auf dem Geschirr, im Innenraum und auf der Türinnenseite. • Es befindet sich zu wenig Salz im Behälter, prüfen Sie die Nachfüllanzeige. • Der Deckel des Salzbehälters ist locker. • Ihr Leitungswasser ist hart. Siehe „Wasserenthärter“. • Verwenden Sie stets Salz, auch wenn Sie Multi-Reinigungstabletten nutzen und stellen Sie die Regenerierung des Wasserenthärters ein. Siehe „Wasserenthärter“.
www.aeg.com 14. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie Geräte mit diesem Symbol nicht mit dem Hausmüll. Bringen Sie das Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt.
ITALIANO 27 INDICE 1. INFORMAZIONI DI SICUREZZA...............................................................................28 2. ISTRUZIONI DI SICUREZZA...................................................................................... 29 3. DESCRIZIONE DEL PRODOTTO............................................................................. 31 4. PANNELLO COMANDI.............................................................................................32 5. PROGRAMMI..............................
1. www.aeg.com INFORMAZIONI DI SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. I produttori non sono responsabili di eventuali lesioni o danni derivanti da un'installazione o un uso scorretti. Conservare sempre le istruzioni in un luogo sicuro e accessibile per poterle consultare in futuro. 1.
ITALIANO • • • • • • • • • 29 La pressione di esercizio dell'acqua (minima e massima) deve essere compresa tra 0.5 (0.05) / 8 (0.8) bar (MPa) Rispettare il numero massimo di 13 coperti. Se il cavo di alimentazione è danneggiato, deve essere sostituito dal produttore, dal Centro di Assistenza Autorizzato o da una persona qualificata per evitare situazioni di pericolo.
www.aeg.com adeguatamente ancorate a una struttura fissa. 2.2 Collegamento elettrico • Il tubo di carico dell'acqua dispone di una valvola di sicurezza e una guaina con un cavo elettrico interno. AVVERTENZA! Rischio di incendio e scossa elettrica. • L'apparecchiatura deve disporre di una messa a terra. • Verificare che i parametri sulla targhetta siano compatibili con le indicazioni elettriche dell'alimentazione.
ITALIANO 2.6 Smaltimento 31 • Tagliare il cavo di rete e smaltirlo. • Rimuovere il blocco porta per evitare che bambini e animali domestici rimangano chiusi all'interno dell'apparecchiatura. AVVERTENZA! Rischio di lesioni o soffocamento. • Staccare la spina dall'alimentazione elettrica. 3. DESCRIZIONE DEL PRODOTTO 1 2 3 12 11 1 2 3 4 5 6 7 10 9 8 Mulinello su cielo vasca Mulinello superiore Mulinello inferiore Filtri Targhetta dei dati Contenitore del sale Apertura di ventilazione 3.
www.aeg.com Quando viene attivato AirDry durante la fase di asciugatura, la proiezione sul pavimento potrebbe non essere completamente visibile. Per vedere se il ciclo si è concluso, controllare il pannello di controllo. 4. PANNELLO COMANDI 2 1 1 2 3 4 5 Tasto On/Off Display Tasto Delay Tasto Program Tasto ExtraHygiene 3 6 7 8 9 4 5 6 7 8 9 Tasto TimeSaver Tasto XtraDry Tasto Reset Spie 4.1 Spie Spia Descrizione Spia di fine. Spia del brillantante.
ITALIANO Fasi del programma Grado di sporco Tipo di carico Fasi del programma Opzioni P2 • Tutto • Stoviglie miste, posate e pentole • Ammollo • Lavaggio da 45°C a 70°C • Risciacqui • Asciugatura • ExtraHygiene • XtraDry P3 • Grado di sporco intenso • Stoviglie miste, posate e pentole • • • • • TimeSaver • ExtraHygiene • XtraDry P5 • Sporco normale o leggero • Stoviglie e bicchieri delicati • Lavaggio a 45 °C • Risciacqui • Asciugatura 2) P4 3) P6 4) Ammollo Lavaggio a 70 °C Risciacqui As
www.aeg.com Programma 1) Acqua (l) Classi (kWh) Durata (min.) P5 12 - 14 0.7 - 0.9 84 - 94 P4 10 0.9 30 P6 9 - 10 1.1 - 1.3 219 - 229 1) I valori possono variare a seconda della pressione e della temperatura dell'acqua, delle variazioni dell'alimentazione elettrica, delle opzioni selezionate e della quantità di stoviglie. 5.2 Informazioni per gli istituti di prova Per le informazioni necessarie, relative alle prestazioni inviare una mail a: info.test@dishwasher-production.
ITALIANO sui risultati di lavaggio e sull'apparecchiatura. La durezza dell'acqua dipende dal contenuto di questi minerali. La durezza dell'acqua è misurata in scale equivalenti. 35 locale. Per informazioni sulla durezza dell’acqua nella propria zona è possibile rivolgersi all’ente erogatore locale. È importante impostare il livello corretto del decalcificatore dell'acqua per garantire buoni risultati di lavaggio.
www.aeg.com Il brillantante viene erogato automaticamente durante la fase di risciacquo con acqua calda. Quando la vaschetta del brillantante è vuota, la spia corrispondente è attiva per indicare di aggiungere altro brillantante. Se i risultati di lavaggio sono soddisfacenti quando vengono usate solo pastiglie multifunzione, sarà possibile disattivare la notifica per il rifornimento del brillantante. Per prestazioni di asciugatura eccellenti, consigliamo tuttavia di usare sempre il brillantante.
ITALIANO 2. Premere per cambiare l'impostazione. 3. Premere On/Off per confermare l'impostazione. 6.6 AirDry AirDry migliora i risultati di asciugatura con consumi elettrici ridotti. AirDry viene attivata automaticamente con tutti i programmi, escluso applicabile). (se Per migliorare le prestazioni di asciugatura, fare riferimento all'opzione XtraDry o attivare nuovamente AirDry.
www.aeg.com 7.1 XtraDry Attivare questa opzione per potenziare le prestazioni di asciugatura. Con XtraDry accesa, la durata di alcuni programmi, il consumo d'acqua e la temperatura dell'ultimo risciacquo potrebbero subire delle variazioni. L'opzione XtraDry è un'opzione permanente per tutti i programmi che programma. I risultati di asciugatura possono ridursi. L'opzione aumenta la pressione e la temperatura dell'acqua. Le fasi di lavaggio e di asciugatura sono più brevi.
ITALIANO 8.1 Contenitore del sale ATTENZIONE! Usare sale grosso specifico per lavastoviglie. Il sale fino aumenta il rischio di corrosione. Il sale viene utilizzato per rigenerare la resina nel decalcificatore e per assicurare buoni risultati di lavaggio nell'uso quotidiano. Come riempire il contenitore del sale 39 ATTENZIONE! Acqua e sale potrebbero fuoriuscire dal contenitore del sale durante il riempimento.
www.aeg.com Se si utilizzano pastiglie multifunzione e le prestazioni di asciugatura sono soddisfacenti, la spia di riempimento del brillantante può essere disattivata. Si consiglia di utilizzare sempre il brillantante per migliori prestazioni di asciugatura, anche in combinazione con pastiglie multifunzione contenenti un agente di risciacquo. 9. UTILIZZO QUOTIDIANO 1. Aprire il rubinetto dell’acqua. 2. Premere il tasto On/Off per accendere l’apparecchiatura.
ITALIANO mostrerà il numero del programma per circa 3 secondi, e poi indica la durata del programma. 4. Impostare le opzioni disponibili. 5. Chiudere la porta dell'apparecchiatura per avviare il programma. Annullamento della partenza ritardata mentre è in corso il conto alla rovescia Avvio del programma con partenza ritardata Tenere premuto Reset finché l’apparecchiatura entra in modalità di selezione programma. 1. Impostare un programma. 2.
www.aeg.com • • • • selezionare un programma con fase di prelavaggio. Utilizzare sempre tutto lo spazio presente nei cestelli. Quando si carica l'apparecchiatura, assicurarsi che le stoviglie vengano raggiunte interamente e lavate dall'acqua rilasciata dagli ugelli del mulinello. Verificare che gli oggetti non si tocchino o coprano. È possibile utilizzare il detersivo per lavastoviglie, il brillantante e il sale separatamente o le pastiglie multifunzione (ad es. "3 in 1", "4 in 1", "Tutto in uno").
ITALIANO 43 10.5 Prima di avviare il programma • Si utilizzi la quantità corretta di detersivo e additivi. Verificare che: 10.6 Scaricare i cestelli • I filtri siano puliti e installati correttamente. • Il tappo del contenitore del sale sia serrato. • I fori sui mulinelli non siano ostruiti. • Siano presenti il sale per lavastoviglie e il brillantante (a meno che non si utilizzino le pastiglie combinate). • Le stoviglie siano riposte correttamente nei cestelli.
www.aeg.com ATTENZIONE! Un’errata posizione dei filtri può comportare scadenti risultati di lavaggio e danni all’apparecchiatura. 11.2 Pulizia del mulinello superiore Si consiglia di pulire regolarmente il mulinello superiore per evitare che lo sporco ostruisca i fori. 5. Assicurarsi che non vi siano residui di cibo o di sporco all'interno o attorno al bordo della vasca di raccolta. 6. Posizionare nuovamente il filtro piatto (A).
ITALIANO contemporaneamente ruotarlo in senso antiorario finché non si blocca in posizione. 11.3 Pulizia esterna • Pulire l'apparecchiatura con un panno inumidito e morbido. • Utilizzare solo detergenti neutri. • Non usare prodotti abrasivi, spugnette abrasive o solventi. 45 guarnizione in gomma della porta, con un panno morbido umido. • Per mantenere al meglio le prestazioni dell'apparecchiatura, si consiglia di utilizzare un prodotto specifico per la pulizia per lavastoviglie almeno una volta al mese.
www.aeg.com Problema e codice allarme Possibile causa e soluzione Il programma non si avvia. • Controllare che l’oblò dell’apparecchiatura sia chiuso. • Se è stato impostato il ritardo, annullare l'impostazione o attendere il termine del conto alla rovescia. • L'apparecchiatura ha avviato la procedura di rigenerazione della resina all'interno del decalcificatore. La procedura dura all'incirca 5 minuti. L'apparecchiatura non carica • Controllare che il rubinetto dell'acqua sia aperto. acqua.
ITALIANO 47 Problema e codice allarme Possibile causa e soluzione Tintinnio/colpi dall'interno dell'apparecchiatura. • Le pentole e le stoviglie non sono state sistemate adeguatamente nei cestelli. Fare riferimento al libretto contenente le indicazioni per caricare il cestello. • Accertarsi che i mulinelli possano girare liberamente. L'apparecchiatura fa scattare • L'amperaggio è insufficiente per sopportare l'uso di più l'interruttore principale. apparecchiature contemporaneamente.
www.aeg.com Problema Possibile causa e soluzione Macchie e tracce di gocce d'acqua su bicchieri e stoviglie. • La quantità di brillantante erogata non è sufficiente. Regolare il livello del brillantante su una posizione superiore. • La causa potrebbe essere la qualità del brillantante. Le stoviglie sono bagnate. • Per ottenere le migliori prestazioni di asciugatura, attivare l'opzione XtraDry e impostare AirDry.
ITALIANO Problema 49 Possibile causa e soluzione Il calcare può depositarsi su • Il livello di sale è basso, controllare l'indicatore di pentole e stoviglie, nella vasca riempimento. o all'interno della porta. • Il tappo del contenitore del sale è lento. • L'acqua di rubinetto è dura. Fare riferimento a "Decalcificatore dell'acqua". • Anche le pastiglie multi-funzione usano il sale e impostano la rigenerazione dell'ammorbidente dell'acqua. Fare riferimento a "Decalcificatore dell'acqua".
www.aeg.com 14. CONSIDERAZIONI SULL'AMBIENTE Riciclare i materiali con il simbolo . Buttare l'imballaggio negli appositi contenitori per il riciclaggio. Aiutare a proteggere l’ambiente e la salute umana e a riciclare rifiuti derivanti da apparecchiature elettriche ed elettroniche. Non smaltire le * apparecchiature che riportano il simbolo insieme ai normali rifiuti domestici. Portare il prodotto al punto di riciclaggio più vicino o contattare il comune di residenza.
ITALIANO 51
117886122-A-402017 www.aeg.