FSE83800P DE IT USER MANUAL Benutzerinformation Geschirrspüler Istruzioni per l’uso Lavastoviglie 2 30
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE............................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................5 3. GERÄTEBESCHREIBUNG........................................................................................... 7 4. BEDIENFELD................................................................................................................8 5.
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com Bauernhöfe, Personalküchenbereiche in Geschäften, Büros und anderen Arbeitsumfeldern. – Für Gäste in Hotels, Motels, Pensionen und anderen wohnungsähnlichen Räumlichkeiten. Nehmen Sie keine technischen Änderungen am Gerät vor. Der Betriebswasserdruck (Mindest- und Höchstdruck) muss zwischen 0.5 (0.05) / 8 (0.8) bar (MPa) liegen Beachten Sie, dass die Höchstzahl an Maßgedecken 13 beträgt.
DEUTSCH 5 2. SICHERHEITSANWEISUNGEN 2.1 Montage WARNUNG! Die Montage des Geräts darf nur von einer qualifizierten Fachkraft durchgeführt werden. • Entfernen Sie das gesamte Verpackungsmaterial. • Montieren Sie ein beschädigtes Gerät nicht und benutzen Sie es nicht. • Halten Sie sich an die mitgelieferte Montageanleitung. • Seien Sie beim Umsetzen des Gerätes vorsichtig, da es sehr schwer ist. Tragen Sie stets Sicherheitshandschuhe und festes Schuhwerk.
www.aeg.com des Wasserzulaufschlauchs an den autorisierten Kundendienst. 2.4 Gebrauch • Setzen oder stellen Sie sich niemals auf die geöffnete Gerätetür. • Geschirrspüler-Reinigungsmittel sind gefährlich. Beachten Sie die Sicherheitsanweisungen auf der Reinigungsmittelverpackung. • Trinken Sie nicht das Wasser aus dem Gerät und verwenden Sie es nicht zum Spielen. • Nehmen Sie kein Geschirr aus dem Gerät, bevor das Programm beendet ist. Auf dem Geschirr kann noch etwas Reinigungsmittel haften.
DEUTSCH 3. GERÄTEBESCHREIBUNG 1 2 3 14 13 12 11 10 9 8 1 2 3 4 5 6 7 8 7 6 Oberer Sprüharm Mittlerer Sprüharm Unterer Sprüharm Siebe Typenschild Salzbehälter Entlüftung Klarspülmittel-Dosierer 3.1 TimeBeam TimeBeam projiziert folgende Informationen auf den Boden unter der Gerätetür: • Die Programmdauer am Programmstart. • 0:00 und CLEAN am Programmende. • DELAY und die Countdown-Dauer am Anfang des Countdowns der Zeitvorwahl. • Einen Fehlercode bei einer Störung des Geräts.
www.aeg.com Wird AirDry während der Trockenphase eingeschaltet, ist die Projektion auf dem Boden möglicherweise nicht vollständig sichtbar. Die verbleibende Zeit des laufenden Programms kann dann auf dem Display des Bedienfelds überprüft werden. 4. BEDIENFELD 1 1 2 3 4 5 2 Taste „Ein/Aus“ Display Delay Sensortaste Program Sensortaste ExtraHygiene Sensortaste 3 4 6 7 8 9 5 6 7 8 9 TimeSaver Sensortaste XtraDry Sensortaste RESET Sensortaste Kontrolllampen 4.
DEUTSCH Programm Verschmutzungsgrad Beladung Programmphasen Optionen P1 • Normaler Verschmutzungsgrad • Geschirr und Besteck • • • • • ExtraHygiene • XtraDry 1) P2 2) P5 3) P3 4) P6 5) P4 6) P8 • Alle • Vorspülen • ExtraHygiene • Geschirr, Be• Hauptspülgang von 45 • XtraDry steck, Töpfe und °C bis 70 °C Pfannen • Spülen • Trocknen • Unterschiedlicher Verschmutzungsgrad • Geschirr, Besteck, Töpfe und Pfannen • Vorspülen • Hauptspülgang 50 °C und 65 °C • Spülen • Trocknen • TimeSaver • XtraD
www.aeg.com Programm P7 8) Verschmutzungsgrad Beladung Programmphasen Optionen • Normaler Verschmutzungsgrad • Geschirr und Besteck • • • • • XtraDry Vorspülen Hauptspülgang 50 °C Spülen Trocknen 1) Dieses Programm gewährleistet den wirtschaftlichsten Wasser- und Energieverbrauch für normal verschmutztes Geschirr und Besteck. Dies ist das Standardprogramm für Prüfinstitute. 2) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben.
DEUTSCH Wasserverbrauch (l) Energieverbrauch (kWh) Dauer (Min.) P4 10 0.9 30 P8 4 0.1 14 P7 12 - 13 1.1 - 1.3 230 - 250 Programm1) 1) Druck und Temperatur des Wassers, die Schwankungen in der Stromversorgung, die ausgewählten Optionen und die Geschirrmenge können die Werte verändern. 5.2 Informationen für Prüfinstitute Wenn Sie Informationen zur Durchführung von Leistungsprüfungen (z.B.
www.aeg.com 6.2 Wasserenthärter Der Wasserenthärter entfernt Mineralien aus dem Spülwasser, die sich nachteilig auf die Spülergebnisse und das Gerät auswirken könnten. Je höher der Mineralgehalt ist, um so härter ist Ihr Wasser. Die Wasserhärte wird in gleichwertigen Einheiten gemessen. Der Enthärter muss entsprechend der Wasserhärte Ihres Gebietes eingestellt werden. Ihr lokales Wasserwerk kann Sie über die Wasserhärte in Ihrem Gebiet informieren.
DEUTSCH 6.3 Klarspülmittelnachfüllanzeige Das Klarspülmittel ermöglicht das Trocknen des Geschirrs ohne Streifen und Flecken. Es wird automatisch während der heißen Spülphasen abgegeben. Ist das Klarspülmittelfach leer, wird die Klarspülmittelnachfüllanzeige eingeschaltet und weist darauf hin, dass Klarspülmittel nachgefüllt werden sollte. Wenn Sie Multi-Reinigungstabletten verwenden, und die Reinigungsergebnisse zufriedenstellend sind, können Sie die Klarspülmittelnachfüllanzeige ausschalten.
www.aeg.com • Die Kontrolllampen und , , , erlöschen. • Die Kontrolllampe blinkt weiterhin. • Im Display wird die aktuelle Einstellung angezeigt. – = das akustische Signal ist ausgeschaltet. – = das akustische Signal ist eingeschaltet. zum Ändern der 2. Drücken Sie Einstellung. 3. Drücken Sie Ein/Aus zum Bestätigen der Einstellung. 6.6 So schalten Sie TimeBeam aus Stellen Sie sicher, dass sich das Gerät im Benutzermodus befindet. 1. Drücken Sie .
DEUTSCH • Die Kontrolllampen und , , , erlöschen. • Die Kontrolllampe blinkt weiterhin. • Im Display wird die aktuelle Einstellung angezeigt – = AirDry ist ausgeschaltet. – 15 = AirDry ist eingeschaltet. 2. Drücken Sie zum Ändern der Einstellung 3. Drücken Sie Ein/Aus zum Bestätigen der Einstellung. 7. OPTIONEN Sie müssen die gewünschten Optionen vor dem Programmstart einschalten. Es ist nicht möglich, Optionen während eines laufenden Programms einoder auszuschalten.
www.aeg.com So schalten Sie TimeSaver ein Drücken Sie . Die zugehörige Kontrolllampe leuchtet. Das Display zeigt die aktualisierte Programmdauer an. 7.3 ExtraHygiene Diese Option bietet bessere Hygieneergebnisse, indem die Temperatur im letzten Spülgang für mindestens 10 Minuten auf 70 °C gehalten wird. So schalten Sie ExtraHygiene ein Drücken Sie . Die zugehörige Kontrolllampe leuchtet. Das Display zeigt die aktualisierte Programmdauer an. 8. VOR DER ERSTEN INBETRIEBNAHME 1.
DEUTSCH 6. Drehen Sie den Deckel des Salzbehälters im Uhrzeigersinn, um den Salzbehälter zu schließen. VORSICHT! Beim Befüllen des Salzbehälters können Wasser und Salz austreten. Starten Sie nach dem Füllen des Salzbehälters umgehend das kürzeste Programm, um Korrosion zu verhindern. Ordnen Sie kein Geschirr in die Körbe ein. 8.2 Füllen des KlarspülmittelDosierers A B VORSICHT! Verwenden Sie ausschließlich Klarspülmittel für Geschirrspüler. 1. Öffnen Sie den Deckel (C). 2.
www.aeg.com VORSICHT! Achten Sie darauf, dass keine Utensilien aus dem Korbrahmen ragen, da diese Gegenstände sowie den Comfort Lift Mechanismus beschädigen können. Der Comfort Lift Mechanismus ermöglich ein Anheben des unteren Korbs (auf die zweite Ebene) und ein Absenken, um das Be- und Entladen von Geschirr zu vereinfachen. Be- und Entladen des unteres Korbs: 1. Zum Anheben des Korbs ziehen Sie den Korb am Griff aus dem Geschirrspüler. Verwenden Sie nicht den Auslösegriff.
DEUTSCH sicher, dass sich das Gerät im Programmwahlmodus befindet. 3. Drücken Sie wiederholt die Taste , bis im Display die Nummer des gewünschten Programm angezeigt wird. Die Programmnummer wird etwa 3 Sekunden lang im Display angezeigt, anschließend erscheint die Programmdauer. 4. Stellen Sie die verfügbaren Optionen ein. 5. Schließen Sie die Gerätetür, um das Programm zu starten. Starten eines Programms mit Zeitvorwahl 1. Wählen Sie ein Programm. wiederholt, bis im 2.
www.aeg.com 10. TIPPS UND HINWEISE 10.1 Allgemeines Beachten Sie die folgenden Hinweise, um optimale Reinigungs- und Trocknungsergebnisse im täglichen Gebrauch sicherzustellen. Sie tragen auch zum Umweltschutz bei. • Schütten Sie größere Lebensmittelreste auf dem Geschirr in den Abfallbehälter. • Spülen Sie das Geschirr nicht von Hand vor. Wählen Sie bei Bedarf ein Programm mit Vorspülphase. • Nutzen Sie die Körbe immer ganz aus.
DEUTSCH • Ordnen Sie hohle Gefäße (z. B. Tassen, Gläser, Pfannen) mit der Öffnung nach unten ein. • Achten Sie darauf, dass Gläser einander nicht berühren. • Ordnen Sie leichte Gegenstände im Oberkorb an. Achten Sie darauf, dass diese sich nicht frei bewegen können. • Ordnen Sie Besteck und kleine Gegenstände in die Besteckschublade ein. • Vergewissern Sie sich, dass sich die Sprüharme ungehindert bewegen können, bevor Sie ein Programm starten. 10.
www.aeg.com 2. Nehmen Sie den Filter (C) aus dem Filter (B). 3. Entfernen Sie den flachen Filter (A). 7. Bauen Sie die Filter (B) und (C) wieder zusammen. 8. Setzen Sie den Filter (B) in den flachen Filter (A) ein. Drehen Sie ihn nach rechts, bis er einrastet. 4. Reinigen Sie die Filter. 5. Achten Sie darauf, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. 6. Setzen Sie den flachen Filter (A) wieder ein.
DEUTSCH 23 11.3 Reinigen der Außenseiten • Reinigen Sie das Gerät mit einem weichen, feuchten Tuch. • Verwenden Sie ausschließlich Neutralreiniger. • Benutzen Sie keine Scheuermittel, scheuernde Reinigungsschwämmchen oder Lösungsmittel. 3. Reinigen Sie den Sprüharm unter fließendem Wasser. Entfernen Sie Verunreinigungen aus den Öffnungen des Sprüharms mit einem spitzen Gegenstand, z.B. einem Zahnstocher. 4.
www.aeg.com 12. FEHLERSUCHE WARNUNG! Eine unsachgemäße Reparatur des Geräts kann eine Gefahr für die Sicherheit des Benutzers darstellen. Die Reparaturarbeiten dürfen nur von qualifiziertem Personal durchgeführt werden. Die meisten Störungen, die auftreten, können behoben werden, ohne dass der autorisierte Kundendienst gerufen werden muss. Informationen zu möglichen Störungen finden Sie in der nachfolgenden Tabelle. Bei einigen Störungen zeigt das Display einen Alarmcode an.
DEUTSCH Störung und Alarmcode 25 Mögliche Ursache und Abhilfe Während des Betriebs • Das ist normal. So werden optimale Reinigungsergebstoppt und startet das Gerät nisse erzielt und Strom gespart. mehrmals. Das Programm dauert zu lang. • Wenn die Zeitvorwahl eingestellt ist, brechen Sie die Zeitvorwahl ab, oder warten Sie, bis sie abgelaufen ist. • Schalten Sie die Option TimeSaver ein, um die Programmdauer zu verkürzen. • Eingeschaltete Optionen können die Programmdauer verlängern.
www.aeg.com 12.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend Störung Mögliche Ursache und Abhilfe Nicht zufriedenstellende Spülergebnisse. • Siehe „Täglicher Gebrauch“, „Tipps und Hinweise“ sowie die Broschüre zum Beladen der Körbe. • Nutzen Sie intensivere Spülprogramme. • Reinigen Sie die Austrittsdüsen der Sprüharme und das Sieb. Siehe „Reinigung und Pflege“. Nicht zufriedenstellende Trocknungsergebnisse. • Das Geschirr stand zu lange im geschlossenen Gerät.
DEUTSCH 27 Störung Mögliche Ursache und Abhilfe Rostspuren am Besteck. • Das Spülwasser enthält zu viel Salz. Siehe „Wasserenthärter“. • Silber- und Edelstahlbesteck wurden zusammen eingeordnet. Ordnen Sie nicht Silber- und Edelstahlbesteck zusammen ein. Am Ende des Programms befinden sich Reinigungsmittelreste im Behälter. • Das Reinigungsmittel-Tab blieb im Behälter stecken und wurde daher nicht vollständig vom Wasser mitgenommen.
www.aeg.com 13. PRODUKTDATENBLATT Warenzeichen AEG Modellkennung FSE83800P Nennleistung (Standard-Einstellungen) 13 Energieeffizienzklasse A+++ Energieverbrauch in kWh pro Jahr, basierend auf 280 Stanard-Reinigungszyklen bei Verwendung von kaltem Wasser und der Modi mit wenig Energiebedarf. Der tatsächliche Verbrauch hängt davon ab, wie das Gerät verwendet wird 234 Energieverbrauch des Standard-Reinigungs-Zyklus (kWh) 0.832 Energieverbrauch im OFF-Modus (W) 0.
DEUTSCH Wasserversorgung Kalt- oder Warmwasser2) 29 max. 60 °C 1) Weitere Werte finden Sie auf dem Typenschild. 2) Wenn Sie Warmwasser mit alternativen Energiequellen (z. B. Solaranlagen) aufbereiten, können Sie durch den Anschluss des Geräts an die Warmwasserversorgung den Energieverbrauch reduzieren. 15. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern.
www.aeg.com INDICE 1. INFORMAZIONI DI SICUREZZA...............................................................................31 2. ISTRUZIONI DI SICUREZZA...................................................................................... 33 3. DESCRIZIONE DEL PRODOTTO............................................................................. 35 4. PANNELLO DEI COMANDI......................................................................................36 5. PROGRAMMI..............................
ITALIANO 1. 31 INFORMAZIONI DI SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. I produttori non sono responsabili di eventuali lesioni o danni derivanti da un'installazione o un uso scorretti. Conservare sempre le istruzioni in un luogo sicuro e accessibile per poterle consultare in futuro. 1.
www.aeg.com clienti di hotel, motel, bed and breakfast e altri ambienti residenziali. Non modificare le specifiche tecniche dell'apparecchiatura. La pressione di esercizio dell'acqua (minima e massima) deve essere compresa tra 0.5 (0.05) / 8 (0.8) bar (MPa) Rispettare il numero massimo di 13 coperti. Se il cavo di alimentazione è danneggiato, deve essere sostituito dal produttore, dal Centro di Assistenza Autorizzato o da una persona qualificata per evitare situazioni di pericolo.
ITALIANO 33 2. ISTRUZIONI DI SICUREZZA 2.1 Installazione AVVERTENZA! L’installazione dell'apparecchiatura deve essere eseguita da personale qualificato. • Rimuovere tutti i materiali di imballaggio. • Non installare o utilizzare l'apparecchiatura se è danneggiata. • Attenersi alle istruzioni fornite insieme all'apparecchiatura. • Prestare sempre attenzione in fase di spostamento dell'apparecchiatura, dato che è pesante. Usare sempre i guanti di sicurezza e le calzature adeguate.
www.aeg.com • I detersivi per la lavastoviglie sono pericolosi. Osservare le istruzioni di sicurezza riportate sulla confezione del detersivo. • Non bere o giocare con l’acqua all’interno dell’apparecchiatura. • Non rimuovere i piatti dall'apparecchiatura fino al completamento del programma. Potrebbe rimanere del detergente sui piatti. • L'apparecchiatura può rilasciare vapore caldo se si apre la porta durante lo svolgimento del programma.
ITALIANO 3. DESCRIZIONE DEL PRODOTTO 1 2 3 14 13 12 11 10 9 8 1 2 3 4 5 6 7 8 7 6 Mulinello su cielo vasca Mulinello superiore Mulinello inferiore Filtri Targhetta dei dati Contenitore del sale Apertura di ventilazione Contenitore del brillantante 3.1 TimeBeam TimeBeam visualizza le seguenti informazioni a terra, sotto alla porta dell'apparecchiatura. • La durata del programma quando inizia il programma. • 0:00 e CLEAN quando il programma è completato.
www.aeg.com Quando viene attivato AirDry durante la fase di asciugatura, la proiezione sul pavimento potrebbe non essere completamente visibile. Per controllare il tempo restante del programma, guardare il display del pannello di controllo. 4. PANNELLO DEI COMANDI 1 1 2 3 4 5 2 Tasto On/Off Display Delay pulsante touch Program pulsante touch ExtraHygiene pulsante touch 3 4 6 7 8 9 5 6 7 8 9 TimeSaver pulsante touch XtraDry pulsante touch RESET pulsante touch Spie 4.
ITALIANO Programma Grado di sporco Tipo di carico Fasi del programma Opzioni P1 • Grado di sporco normale • Stoviglie e posate • • • • Pre-lavaggio Lavaggio a 50 °C Risciacqui Asciugatura • ExtraHygiene • XtraDry 2) • Tutto • Stoviglie miste, posate e pentole • Pre-lavaggio • Lavaggio da 45°C a 70°C • Risciacqui • Asciugatura • ExtraHygiene • XtraDry 3) • Sporco misto • Stoviglie miste, posate e pentole • Pre-lavaggio • Lavaggio a 50 °C e 65 °C • Risciacqui • Asciugatura • TimeSaver • XtraD
www.aeg.com Programma Grado di sporco Tipo di carico Fasi del programma Opzioni P7 • Grado di sporco normale • Stoviglie e posate • • • • • XtraDry 8) Pre-lavaggio Lavaggio a 50 °C Risciacqui Asciugatura 1) Questo programma offre l'utilizzo più efficiente di acqua ed elettricità per lavare stoviglie e posate con grado di sporco normale. Questo è il programma standard per gli istituti di prova. 2) L'apparecchiatura rileva il grado di sporco e la quantità di stoviglie presenti nei cestelli.
ITALIANO Acqua (l) Energia (kWh) Durata (min.) P8 4 0.1 14 P7 12 - 13 1.1 - 1.3 230 - 250 Programma 1) 39 1) I valori possono variare a seconda della pressione e della temperatura dell'acqua, delle variazioni dell'alimentazione elettrica, delle opzioni selezionate e della quantità di stoviglie. 5.2 Informazioni per gli istituti di prova Per ricevere le informazioni necessarie per eseguire i test prestazionali (ad esempio conformemente a EN60436), inviare un'e-mail a: info.
www.aeg.com 6.2 Decalcificatore dell’acqua Il decalcificatore rimuove dall'acqua i minerali che avrebbero effetti negativi sui risultati di lavaggio e sull'apparecchiatura. La durezza dell'acqua dipende dal contenuto di questi minerali. La durezza dell'acqua è misurata in scale equivalenti. Il decalcificatore dell'acqua deve essere regolato in base alla durezza dell’acqua locale. Per informazioni sulla durezza dell’acqua nella propria zona è possibile rivolgersi all’ente erogatore locale.
ITALIANO rilasciato automaticamente durante la fase di risciacquo a caldo. Quando la vaschetta del brillantante è vuota, la spia corrispondente è attiva per indicare di aggiungere altro brillantante. Se i risultati di lavaggio sono soddisfacenti quando vengono usate solo pastiglie multifunzione, sarà possibile disattivare la notifica per il rifornimento del brillantante. Per prestazioni di asciugatura eccellenti, consigliamo tuttavia di usare sempre il brillantante.
www.aeg.com 2. Premere per cambiare l'impostazione. 3. Premere On/Off per confermare l'impostazione. 6.6 Come disattivare TimeBeam Verificare che l'apparecchiatura sia in modalità utente. 1. Premere • Le spie . AirDry viene attivata automaticamente , , , e sono spente. lampeggia ancora. • La spia • Il display mostra l'impostazione attuale. – = TimeBeam è disattivato. – ATTENZIONE! Non cercare di chiudere l'apparecchiatura 2 minuti dopo l'apertura automatica.
ITALIANO 43 7. OPZIONI Le opzioni desiderate devono essere attivate ogni volta prima dell'avvio di un programma. Non è possibile attivare o disattivare le opzioni durante l'esecuzione di un programma. L'attivazione dell'opzione XtraDry disattiva TimeSaver e viceversa. Come attivare XtraDry Premere . La spia relativa è accesa. Il display indica la durata aggiornata del programma. Non tutte le opzioni sono compatibili tra loro.
www.aeg.com regolare il livello del decalcificatore dell'acqua. 2. Riempire il contenitore del sale. 3. Riempire il contenitore del brillantante. 4. Aprire il rubinetto dell’acqua. 5. Avviare un programma per rimuovere possibili residui di lavorazione presenti all’interno dell’apparecchiatura. Non utilizzare il detersivo e non caricare stoviglie. Quando si avvia un programma, l'apparecchiatura può impiegare fino a 5 minuti per rigenerare la resina nel decalcificatore.
ITALIANO 8.2 Come riempire il contenitore del brillantante A B 45 ATTENZIONE! Utilizzare solo prodotti brillantanti specifici per lavastoviglie. 1. Aprire il coperchio (C). 2. Riempire il contenitore (B) finché il brillantante non raggiunge l'indicazione di "MAX". 3. Rimuovere l'eventuale brillantante fuoriuscito con un panno assorbente, per evitare che si formi troppa schiuma. 4. Chiudere il coperchio. Assicurarsi che il coperchio si blocchi in posizione.
www.aeg.com Il cestello viene automaticamente bloccato sul livello superiore. 2. Mettere o togliere gli articoli nel/dal cestello con attenzione (rimandiamo al volantino Caricamento del cestello). 3. Abbassare il cestello collegando la maniglia di avvio al telaio del cestello, come indicato qui di seguito. Sollevare completamente l'impugnatura di avvio e il cestello leggermente fino a che il cestello non sarà disinnestato su entrambi i lati.
ITALIANO Durante il conto alla rovescia è possibile spostare la partenza ritardata ma non modificare il programma e le opzioni. Appena è completato il conto alla rovescia, il programma si avvia. Apertura della porta durante il funzionamento dell'apparecchiatura Aprendo la porta mentre è in corso un programma, l’apparecchiatura si arresta. Ciò può influenzare il consumo di energia e la durata del programma. Dopo la chiusura della porta, l'apparecchiatura riprende dal punto in cui era stata interrotta.
www.aeg.com 10.2 Se si utilizzano sale, brillantante e detersivo • Utilizzare soltanto sale, brillantante e detersivo specifici per lavastoviglie. Altri prodotti possono danneggiare l'apparecchiatura. • In zone con acqua dura e molto dura si consiglia di utilizzare solo detersivo (in polvere, gel, pastiglie senza funzioni aggiuntive), brillantante e sale separatamente per risultati di pulizia e asciugatura ottimali.
ITALIANO 2. Vuotare prima il cestello inferiore e quindi quello superiore. 49 Dopo aver completato il programma l'acqua può restare sulle superfici interne dell'apparecchiatura. 11. PULIZIA E CURA AVVERTENZA! Prima di eseguire qualunque intervento di manutenzione, spegnere l'apparecchiatura ed estrarre la spina dalla presa. Filtri sporchi e mulinelli ostruiti riducono i risultati di lavaggio. Eseguire controlli periodici e pulirli, se necessario. 2. Estrarre il filtro (C) dal filtro (B). 3.
www.aeg.com 7. Rimontare i filtri (B) e (C). 8. Posizionare nuovamente il filtro (B) nel filtro piatto (A). Ruotarlo in senso orario finché non si blocca in posizione. ATTENZIONE! Un’errata posizione dei filtri può comportare scadenti risultati di lavaggio e danni all’apparecchiatura. 3. Lavare il mulinello sotto l'acqua corrente. Utilizzare un oggetto sottile appuntito, ad es. uno stuzzicadenti, per rimuovere i residui di sporco dai fori. 4.
ITALIANO 11.4 Pulizia interna • Pulire accuratamente l'apparecchiatura, inclusa la guarnizione in gomma della porta, con un panno morbido umido. • Per mantenere al meglio le prestazioni dell'apparecchiatura, si consiglia di utilizzare un prodotto specifico per la pulizia per lavastoviglie almeno una volta al mese. Seguire attentamente le indicazioni riportate sulle confezioni dei prodotti.
www.aeg.com Problema e codice allarme Possibile causa e soluzione L'apparecchiatura non scarica l'acqua. • Controllare che lo scarico del lavello non sia ostruito. • Controllare che il filtro nel tubo di scarico non sia ostruito. • Controllare che il sistema del filtro interno non sia ostruito. • Verificare che il tubo di scarico non sia attorcigliato o piegato. Il display visualizza . Il dispositivo antiallagamento è attivo.
ITALIANO Fare riferimento a "Preparazione al primo utilizzo", "Utilizzo quotidiano" o "Consigli e suggerimenti" per altre possibili cause. 53 ricomparsa dell'anomalia, contattare il Centro di Assistenza Autorizzato. Per i codici allarme non presenti in tabella, contattare un Centro di Assistenza Autorizzato. Una volta controllata l'apparecchiatura, spegnerla e riaccenderla. In caso di 12.
www.aeg.com Problema Possibile causa e soluzione Le stoviglie sono bagnate. • Per ottenere le migliori prestazioni di asciugatura, attivare XtraDry e AirDry. • Il programma non dispone di una fase di asciugatura oppure questa fase viene eseguita a bassa temperatura. • Il contenitore del brillantante è vuoto. • La causa potrebbe essere la qualità del brillantante. • La causa potrebbe essere la qualità del detersivo in pastiglie multifunzione.
ITALIANO Problema 55 Possibile causa e soluzione Il calcare può depositarsi su • Il livello di sale è basso. Controllare l'indicatore del sapentole e stoviglie, nella vasca le. o all'interno della porta. • Il tappo del contenitore del sale è lento. • L'acqua di rubinetto è dura. Fare riferimento a "Decalcificatore dell'acqua". • Usare il sale e impostare la rigenerazione dell'addolcitore dell'acqua anche se vengono usate pastiglie multi-funzione. Fare riferimento a "Decalcificatore dell'acqua".
www.aeg.com Consumo energetico nel modo lasciato acceso (W) 5.0 Consumo di acqua in litri/anno, basato su 280 cicli di lavaggio standard.
ITALIANO 57
www.aeg.
ITALIANO 59
117885844-A-412018 www.aeg.