FSE83806P USER MANUAL EN User Manual Dishwasher
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION...........................................................................................6 4. CONTROL PANEL....................................................................................................... 7 5. PROGRAMMES...
ENGLISH 3 damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • • • • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. Do not leave the appliance with the door open, to avoid a tripping hazard. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance. The appliance is to be connected to the water mains using the new supplied hose-sets.
ENGLISH installation. Make sure that there is access to the mains plug after the installation. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. 2.3 Water connection • Do not cause damage to the water hoses. • Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.
www.aeg.com 3. PRODUCT DESCRIPTION 1 2 3 13 12 11 10 9 8 7 1 2 3 4 5 6 7 6 Top spray arm Upper spray arm Lower spray arm Filters Rating plate Air vent Rinse aid dispenser 3.1 TimeBeam TimeBeam displays the following information on the floor below the appliance door: • The programme duration when the programme begins. • 0:00 and CLEAN when the programme is completed. • DELAY and the countdown duration when the delay start begins. • An alarm code when the appliance has a malfunction.
ENGLISH When AirDry is activated during the drying phase, the projection on the floor may not be completely visible. To check the remaining time of the running programme, look at the control panel display. 4. CONTROL PANEL 2 1 1 2 3 4 5 On/off button Display Delay touch button Program touch button ExtraHygiene touch button 3 4 6 7 8 9 5 6 7 8 9 TimeSaver touch button XtraDry touch button RESET touch button Indicators 4.1 Indicators Indicator Description Rinse aid indicator.
www.aeg.
ENGLISH 9 5.1 Consumption values Water (l) Energy (kWh) Duration (min) P1 12.5 0.78 138 P2 7.0 - 14.0 0.9 - 1.6 90 - 160 P5 14 - 16 1.2 - 1.5 160 - 180 P3 12.5 - 14.5 1.4 - 1.7 170 - 190 P6 12 - 14 0.7 - 0.9 82 - 92 P4 10.5 0.7 38 P8 4 0.01 14 P7 9.0 - 10.0 1.1 - 1.3 230 - 250 Programme 1) 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.
www.aeg.com How to set the programme selection mode The appliance is in programme selection mode when the display shows the programme number P1. • The display shows the current setting. – = the rinse aid empty notification is deactivated. – = the rinse aid empty notification is activated. After activation, the appliance is in programme selection mode by default. If not, set the programme selection mode the following way: 2. Press to change the setting. 3.
ENGLISH 11 How to activate the acoustic signal for the end of programme Make sure the appliance is in user mode. 1. Press . • The indicators are off. , , and still flashes. • The indicator • The display shows the current setting. – = the acoustic signal is deactivated. – = the acoustic signal is activated. 2. Press to change the setting. 3. Press the on/off button to confirm the setting. 6.
www.aeg.com 3. Press on/off to confirm the setting. 7. OPTIONS Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. Not all options are compatible with each other. If you select non compatible options, the appliance automatically deactivates one or more of them. Only the indicators of the still active options are on.
ENGLISH detergent and do not load the baskets. 8.1 How to fill the rinse aid dispenser A B 13 CAUTION! Only use rinse aid designed specifically for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation. 4. Close the lid. Make sure that the lid locks into position. Fill the rinse aid dispenser when the indicator (A) is clear. C 9. DAILY USE 1.
www.aeg.com The basket is automatically locked on the upper level. 2. Carefully place items in the basket or remove them (refer to Basket loading leaflet). 3. Lower the basket by connecting the release handle with the basket frame as shown below. Lift the release handle completely and the basket handle slightly until the basket is disengaged on both sides. 2. Put the detergent, in powder or tablets, in the compartment (B). 3.
ENGLISH not to change the selection of the programme and options. When the countdown is completed, the programme starts. Opening the door while the appliance operates Opening the door while a programme is running stops the appliance. It may affect the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption. If the door is opened for more than 30 seconds during the drying phase, the running programme ends.
www.aeg.com 10.3 Loading the baskets • Use the appliance to wash dishwasher-safe items only. • Do not wash in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not wash in the appliance items that can absorb water (sponges, household cloths). • Remove large food residues from dishes. • Soak cookware with burnt-on food before washing it in the appliance. • Put hollow items (cups, glasses and pans) with the opening facing downwards.
ENGLISH 17 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the upper spray arm We recommend to clean the upper spray arm regularly to prevent soil from clogging the holes. 5.
www.aeg.com 11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning 3. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. 4. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place. 12.
ENGLISH WARNING! Repairs not properly done may result in serious risk to the safety of the user. Any repairs must be performed by qualified personnel. 19 With some problems, the display shows an alarm code. The majority of problems that can occur can be solved without the need to contact an Authorised Service Centre. Problem and alarm code Possible solution You cannot activate the appliance. • Make sure that the mains plug is connected to the mains socket.
www.aeg.com Problem and alarm code Possible solution The appliance door is difficult to close. • The appliance is not levelled. Loosen or tighten the adjustable feet (if applicable). • Parts of the tableware are protruding from the baskets. Rattling/knocking sounds from inside the appliance. • The tableware is not properly arranged in the baskets. Refer to basket loading leaflet. • Make sure that the spray arms can rotate freely. The appliance trips the circuit-beaker.
ENGLISH 21 Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry and set AirDry . • The programme does not have a drying phase or has a drying phase with low temperature. • The rinse aid dispenser is empty. • The quality of the rinse aid can be the cause. • The quality of the multi-tablets can be the cause. Try a different brand or activate the rinse aid dispenser and use rinse aid and multi-tablets together.
www.aeg.com Voltage (V) 200 - 240 Frequency (Hz) 50 / 60 Wattage (W) 1550-2200 bar (minimum and maximum) 0.5 - 8 kPa (minimum and maximum) 50 - 800 Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 14 Electrical connection 1) Water supply pressure 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption. 14.
ENGLISH 23 For best washing performance it is recommended to connect the appliance to a cold water supply. 2. To adjust the front height of the appliance, turn the 2 front feet counterclockwise. 3. To adjust the rear height of the appliance, turn the middle screw counterclockwise. 14.2 Adjusting the level of the appliance A correct adjustment of the level of the appliance allows the door to close and seal correctly.
www.aeg.com 14.4 Water drain hose The highest point of the drain hose must be no more than 600 mm from the floor and must have a continuous fall to the plumbing connection. The drain hose can be lengthened using additional lengths and connectors. These must be purchased from Electrolux Spare Parts. The extension length must not exceed 2 metres. The drain hose must be free of obstructions. Remove the sink plug when the appliance drains the water to prevent that the water goes back into the appliance.
ENGLISH 4. Repair or replace warranty: During the Warranty Period, Electrolux or its ASC will, at no extra charge if your Appliance is readily accessible for service, without special equipment and subject to these terms and conditions, repair or replace any parts which it considers to be defective. Electrolux may, in its absolute discretion, choose whether the remedy offered for a valid warranty claim is repair or replacement. Electrolux or its ASC may use refurbished parts to repair your Appliance.
www.aeg.com 10. New Zealand: For Appliances and services provided by Electrolux in New Zealand, the Appliances come with a guarantee by Electrolux pursuant to the provisions of the Consumer Guarantees Act, the Sale of Goods Act and the Fair Trading Act. Where the Appliance was purchased in New Zealand for commercial purposes the Consumer Guarantee Act does not apply. 11.
ENGLISH 27
117868970-A-332018 www.aeg.