User's Manual

English
55
NOTE:
• Youcanmaketheunitsearchagainforastationsignalatanytime.Todoso,press
the RCC button (6), the “ ”symbolstartstoashagain.Youcanalsodeactivatethe
automatic search with the RCC button. To do so, keep the RCC button pressed until
the “ ” symbol is no longer displayed.
• Thesignalcanbereceivedwithoutproblemswithinaradiusofca.2000kmaround
Frankfurt / Main, but interference may occur, depending on local conditions. This
may occur especially in buildings containing a high percentage of metal, as well as in
proximitytoTVsets,PCs,mobilephonesetc.whichareswitchedon!Ifthereception
cannot be automatically adjusted after 10 minutes in spite of the alignment of the
integrated antenna, the reception in the respective location is too weak. In this case,
set the time manually or change location.
Manual
The time cannot be set manually whilst the unit is searching for a radio signal.
• HoldtheMODEbutton(9)presseduntiltheyearindication(YR)onthedisplayashes.
• UsingtheUP(8)undDOWN(7)buttons,youcannowsettheyear(YR),month(MONTH),
day (DATE), the language for the weekday (DAY), time zone (ZONE), hours and min-
utes in turn. For the weekday language you can choose from the following languages:
GE = German, EN = English, IT = Italian, FR = French, NE = Dutch, SP = Spanish,
DE = Danish.
• Ineachcase,conrmtheinputwiththeMODEbutton.Thecurrentindicationtobeset
ashesonthedisplay.
NOTE:
• Theinputisstoredautomaticallywithinapproximately30secondswhennobuttonis
pressed.
• Settingoftheweekdayisdoneautomatically.
Change time display format
Press the UP button (8) to switch between 12 hour and 24 hour display.
NOTE:
If 12 hour is selected, the following will appear: AM = morning, PM = afternoon