User's Manual

English
57
Turning off the Alarm
Press the ALM SET button (3) to stop the alarm.
Automatic Alarm Interval
Theautomaticallysetalarmfunctioncanbeshutoffforapproximately5minuteswiththe
SNZ
LIGHTbutton(1).SNZ1orSNZ2ashesonthedisplay.
Deactivate the Alarm Function
1. Press the ALM SET button (3) once. AL1 appears on the display.
2. Then press the UP button to deactivate the first alarm time. The “
” symbol goes out
on the display.
3. Press the ALM SET button again. AL2 appears on the display.
4. Press the UP button to deactivate the second alarm time. The “ ” symbol goes out on
the display.
5. Press the ALM SET button to return to the time display.
Projection
NOTE: Important!
• Thedisplaycanonlybeseeninadarkenedroom.
• Theoptimumdistancefortheprojectionis3-5meters.
With this unit, you can project the time onto a wall or the ceiling.
• PresstheSNZ
LIGHTbutton(1)toswitchonthefunctionforapprox.5seconds.
• Projector(10)projectsthecurrenttemperatureandprojector(5)thetime.
• Topreventtheprojectionsfromoverlapping,rotatetheprojectorsinthedesireddirec-
tion.
Cleaning
CAUTION:
Do not dip the appliance in water.
• Removetheplugbeforecleaning.
• Cleantheappliancewithaslightlyhumidclothwithoutanyadditives.