Specifications

91
Data Types Section 10-5
10.4.3 DIP Switches
The following interface settings must be defined:
RS422 / RS485 as forward channel, to which the terminal is connect-
ed (if available)
Data length 7 bits
19200 Baud
Parity check, activated
Even parity
1 stop bit
Check sum, activated
Write access, permitted
Resistance for Termination Transmit-line, activated (if available)
Resistance for Termination Receive-line, activated (if available)
The functions of the DIP switches vary with the respective AJ71C24 model. There-
fore, please consult the manual of the respective communications processor type
for information on the specific functions of the switches.
10.5 Data Types
Bit operands with access in bit or word-mode
X Inputs hexadecimal input
Y Outputs hexadecimal input
M Flags decimal input
L Latch flags decimal input
S Step flags decimal input
B Link flags hexadecimal input
F Error flags decimal input
TS Timer contact decimal input
TC Timer coil decimal input
CS Counter contact decimal input
CC Counter coil decimal input
Word operands with access in word or double word-mode
TN Timer actual value decimal input
CN Counter actual value decimal input
D Data register decimal input
W Link register hexadecimal input