Specifications

101
Error Messages Section 11-6
AEG - Specific Error Messages:
Code 1 Error from the data transmission-layer
Subcode
50 E
NO POLL QUIT ...............No acknowledge signal upon
polling
51 E
NO TELE QUIT................No acknowledge signal upon or-
der-message
52 E
NO TELE POLL QUITT .......No acknowledge signal upon
tele-polling
54 E
POLL TIMEOUT................Timeout - no response upon
polling
55 E
TELE TIMEOUT................Timeout - no response mes-
sage
56 E
NO RESP QUIT QUIT ........Timeout - no response upon re-
sponse-acknowledge signal
Code 3 Error from the PLC
Subcode
05 Wrong type of operand
06 Valid area exceeded