Specifications

115
Error Messages Section 13-6
13.6 Error Messages
Code 1 E SLAVE NOT READY .........Slave not ready
2E
PROTOKOL ...................Sequence of the packets
3E
FRAME .......................Character frame error
4E
TIMEOUT .....................Timeout error
5E
CRC BCC ....................CRC error
6E
PARITY .......................Parity error
7E
SEND ABORT ................Abort send process
8E
REC ABORT .................Abort receive process
9E
BUF SIZE ....................Insufficient cyclic buffer
10 E
NO DEFINE ..................No cyclic data defined
12 E
DEFINE .......................Cyclic data already defined
15 E
NO PROTOCOL ..............Selected protocol is not sup-
ported
16 E
OVERRUN ....................Receive buffer overrun
17 E
NAK...........................NAK from the PLC
40 E
SYS ADDRESS...............Undefined system variable
SUCOM1 Specific Error Messages
Code 50 E
QUITTUNG COMM ...........No acknowledge signal during
the connection setup
51 E
QUITTUNG DATA ............No acknowledge signal has
been received after sending an
information block
52 E
NO DATA.....................No data upon request
Error in the Data Section
Code 53 E
RECEIVE COUNT ............Number of bytes received does
not correspond to the number of
bytes requested
54 E
NOT READY .................No STX upon receipt of data
block