Specifications

122
Error Messages Section 14-6
14.6 Error Messages
Code 1
Subcode
1 E
SLAVE NOT READY .........Slave not ready
2E
PROTOKOL ...................Sequence of the packets
3E
FRAME .......................Protocol frame error
4E
TIMEOUT .....................Timeout error
5E
CRC BCC ....................CRC error
6E
PARITY .......................Parity error
7E
SEND ABORT ................Send process aborted
8E
REC ABORT .................Receive process aborted
9E
BUF SIZE ....................Insufficient cyclic buffer
10 E
NO DEFINE ..................No cyclic data defined
12 E
DEFINE .......................Cyclic data already defined
15 E
NO PROTOCOL ..............Selected protocol is not sup-
ported
16 E
OVERRUN ....................Receive buffer overrun
40 E
SYS ADDRESS...............Undefined system variable
50 E
RESPONSE TIMEOUT .......No response from PLC
Code 2
Subcode
58 E
RECEIVE COUNT ............Number of received data incor-
rect. Check if a variable with an
odd number of bytes is read
from a word or double-word ad-
dress in the mask in which the
error occurs.
Code 3 PLC error
Subcode
6 Data area error ...................Write-access to flag .= 290.
Address does not exist in PLC
7 Illegal write-access to timer and
counter...........................
Writing to timer and counter not
permitted.
10 Incorrect data coding in the proto-
col
Code 17
Subcode
00 BCC error on the PLC-end
01 Frame error on the PLC-end
02 Parity error on the PLC-end
03 Illegal command to PLC...........Write-access to highspeed
counter.
04 Procedure error on the PLC-end