Specifications

49
Initialization of Module K43 of EBERLE PLS514 Section 5-12
5.12 Initialization of Module K43 of EBERLE PLS514
For communication with the module K43 of an EBERLE PLS 514 the following
parameters must be set:
For TTY-Interfacing:
Baud rate: 9600
Parity: even
Data bits: 8
Stop bits: 1
Handshake: no handshake
Coordination flag: none
Spec. PLC-communication: none
DB: 0
DW: 0
Block check: Yes
CPU-number within the PLC: 0
Floating point numbers in IEEE-Format: no
For RS232-Interfacing:
Baud rate: 9600
Parity: even
Data bits: 8
Stop bits: 1
Handshake: hardware
Coordination flag: none
Spec. PLC-communication: none
DB: 0
DW: 0
Block check: Yes
CPU-number within the PLC: 0
Floating point numbers in IEEE-Format: no
For timer, BCD numbers and counter always double words (32 bit) must be used,
e.g. DW0.
The initialization of the module K43 is done with the values containing in the file
INI.IL. The values containing in this file must be set as follows.