Specifications

64
Error Messages Section 6-6
6.6 Error Messages
Code 1 E SLAVE NOT READY ..........Slave not ready or incorrect
CPU-ID
2E
PROTOKOL ....................Sequence of the packets
3E
FRAME .........................Character frame error
4E
TIMEOUT.......................Timeout error
5E
CRC BCC......................CRC error
6E
PARITY.........................Parity error
7E
SEND ABORT .................Abort send process
8E
REC ABORT ...................Abort receive process
9E
BUF SIZE......................Insufficient cyclic buffer
10 E
NO DEFINE....................No cyclic data defined
12 E
DEFINE ........................Cyclic data already defined
15 E
NO PROTOCOL ...............Selected protocol is not sup-
ported
16 E
OVERRUN......................Receive buffer overrun
17 E
NAK............................NAK from the PLC
40 E
SYS ADDRESS ................Undefined system variable
SUCOM1 Specific Error Messages
50 E
QUITTUNG COMM.............No acknowledge signal during
the communications setup
51 E
QUITTUNG DATA..............No acknowledge signal has
been received after sending an
information block
52 E
NO DATA ......................No data upon request
Errors in the Data Section
53 E
RECEIVE COUNT..............Number of bytes received does
not correspond to the number of
bytes requested
Possible errors:
- A variable with odd number of bytes is read from a word or double word address
within the mask, were the error appears.