Specifications

79
Error Messages Section 8-6
53 E NO RESPONSE WRONG
CHAR .............................No response message
54 E
TIMEOUT NO RESPONSE . . . .Timeout - no response mes-
sage
55 E
TIMEOUT BLOCKZEIT .........Timeout - block time period has
been exceeded
56 E
TIMEOUT QUIT RESPONSE . .Timeout - no acknowledge sig-
nal
57 E
ABBRUCH SPS................EOT -PLC abort
Code 2
Subcode
58 E
RECEIVE COUNT..............Number of received data is in-
correct
Possible errors:
- Check if in the mask where the error occurs a variable with odd
number of bytes will be read by a word or double-word address.
See module manual
Code 3
Subcode
1 The requested module is not available
16 Module is not accessible
35 The access to this address field is not allowed
36 The address field is secured by a user
37 Timer must not be written to
38 Module number to high
39 Module not available
40 Module is to small
147 Flag area overrun (CL200 only)
Possible errors:
- Flag area defined out of range of MB0 to MB191