GI644K USER MANUAL FR Notice d'utilisation Table de cuisson
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................2 2. CONSIGNES DE SÉCURITÉ........................................................................................5 3. DESCRIPTION DE L'APPAREIL...................................................................................7 4. UTILISATION QUOTIDIENNE.................................................................................... 9 5. CONSEILS................
FRANÇAIS 3 utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • • sur une table de cuisson car cela pourrait provoquer un incendie. N'essayez JAMAIS d'éteindre un feu avec de l'eau. Éteignez l'appareil puis couvrez les flammes, par exemple avec un couvercle ou une couverture ignifuge. ATTENTION : Toute cuisson doit être surveillée. Une cuisson courte doit être surveillée en permanence. AVERTISSEMENT : Risque d'incendie ! N'entreposez rien sur les surfaces de cuisson.
FRANÇAIS 5 2. CONSIGNES DE SÉCURITÉ 2.1 Installation AVERTISSEMENT! L'appareil doit être installé uniquement par un professionnel qualifié. AVERTISSEMENT! Risque de blessure corporelle ou de dommages matériels. • Retirez l'intégralité de l'emballage. • N'installez pas et ne branchez pas un appareil endommagé. • Suivez scrupuleusement les instructions d'installation fournies avec l'appareil. • Respectez l'espacement minimal requis par rapport aux autres appareils et éléments.
www.aeg.com • Si la prise de courant est lâche, ne branchez pas la fiche d'alimentation secteur. • Ne tirez jamais sur le câble d'alimentation pour débrancher l'appareil. Tirez toujours sur la fiche. • N'utilisez que des systèmes d'isolation appropriés : des coupecircuits, des fusibles (les fusibles à visser doivent être retirés du support), un disjoncteur différentiel et des contacteurs. • L'installation électrique doit être équipée d'un dispositif d'isolement à coupure omnipolaire.
FRANÇAIS Soulevez toujours ces objets lorsque vous devez les déplacer sur la surface de cuisson. • Cet appareil est exclusivement destiné à un usage culinaire. Ne l'utilisez pas pour des usages autres que celui pour lequel il a été conçu, à des fins de chauffage par exemple. 2.4 Entretien et nettoyage • Nettoyez régulièrement l'appareil afin de maintenir le revêtement en bon état. • Éteignez l'appareil et laissez-le refroidir avant de le nettoyer.
www.aeg.com 3.2 Description du bandeau de commande 1 2 3 4 5 12 6 7 11 10 8 9 Les touches sensitives permettent de faire fonctionner l'appareil. Les affichages, les voyants et les signaux sonores indiquent les fonctions activées. TouFonction che sensitive Commentaire 1 MARCHE/ARRÊT 2 Verrouillage / Dispositif de Pour verrouiller ou déverrouiller le bandeau sécurité enfants de commande. 3 STOP+GO Pour activer et désactiver la fonction.
FRANÇAIS 9 3.3 Indicateurs de niveau de cuisson Affichage Description La zone de cuisson est désactivée. La zone de cuisson est activée. - La fonction STOP+GO est activée. La fonction Démarrage automatique de la cuisson est activée. Fonction Booster est activée. + chiffre Une anomalie de fonctionnement s'est produite. / OptiHeat Control (Voyant de chaleur résiduelle à trois niveaux) : continuer la cuisson / maintien au chaud / chaleur résiduelle.
www.aeg.com • la table de cuisson surchauffe (par ex. lorsqu'un récipient chauffe à vide). Laissez refroidir la zone de cuisson avant de réutiliser la table de cuisson. • vous avez utilisé un récipient inadapté. Le symbole s'allume et la zone de cuisson se désactive automatiquement au bout de 2 minutes. • vous ne désactivez pas la zone de cuisson ou ne modifiez pas le niveau de cuisson. Au bout de quelques instants, s'allume et la table de cuisson s'éteint.
FRANÇAIS 11 4.7 Fonction Booster Pour désactiver la fonction : Cette fonction vous permet d'augmenter la puissance des zones de cuisson à induction. La fonction peut être activée pour la zone de cuisson à induction uniquement pour une durée limitée. Lorsque cette durée est écoulée, la zone de cuisson à induction revient automatiquement au niveau de cuisson le plus élevé. sélectionnez la zone de cuisson avec Reportez-vous au chapitre « Caractéristiques techniques ».
www.aeg.com minuteur pour régler la durée. Lorsque la durée s'est écoulée, un signal sonore retentit et 00 clignote. Pour arrêter le signal sonore : appuyez sur . Cette fonction est sans effet sur le fonctionnement des zones de cuisson. 4.9 STOP+GO Cette fonction sélectionne le niveau de cuisson le plus bas pour toutes les zones de cuisson activées. 4.11 Dispositif de sécurité enfants Cette fonction permet d'éviter une utilisation involontaire de la table de cuisson.
FRANÇAIS • • • • vous appuyez sur Minuterie se termine Minuteur dégressif se termine vous posez un objet sur le bandeau de commande. fonctionner manuellement le ventilateur de la table de cuisson. Sur la plupart des hottes, le système de commande à distance est désactivé par défaut. Activez-le avant d'utiliser cette fonction. Pour plus d'informations, reportez-vous au manuel d'utilisation de la hotte. 4.
www.aeg.com Éclaira- Faire Faire frige auto- bouillir1) re2) matique Mode H6 On Vitesse Vitesse du venti- du ventilateur 2 lateur 3 1) La table de cuisson détecte le processus Activation manuelle de la vitesse du ventilateur Vous pouvez également activer la fonction manuellement. Pour ce faire, appuyez sur la touche lorsque la table de cuisson est allumée. Cela désactive le fonctionnement automatique de la fonction et vous permet de modifier manuellement la vitesse du ventilateur.
FRANÇAIS 15 5. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 5.1 Ustensiles de cuisson Sur les zones de cuisson à induction, un champ électromagnétique puissant chauffe les récipients très rapidement. Utilisez des récipients adaptés aux zones de cuisson à induction. Matériaux des récipients • adaptés : fonte, acier, acier émaillé, acier inoxydable, fond multicouche (homologué par le fabricant). • inadaptés : aluminium, cuivre, laiton, verre, céramique, porcelaine.
www.aeg.com Niveau de cuisson Utilisation : Durée (min) Conseils Conservez les aliments cuits au au bechaud. soin Placez un couvercle sur le récipient. 1-3 Sauce hollandaise, faire fondre : beurre, chocolat, gélatine. 5 - 25 Mélangez de temps en temps. 1-3 Solidifier : omelettes, œufs cocotte. 10 - 40 Couvrez pendant la cuisson. 3-5 Faire mijoter des plats à base de riz et de laitage, réchauffer des plats cuisinés. 25 - 50 Ajoutez au moins deux fois plus d'eau que de riz.
FRANÇAIS 17 Hottes de cuisinière dotées de la fonction Hob²Hood Pour trouver la gamme complète des hottes qui sont dotées de cette fonction, consultez notre site web destiné aux consommateurs. Les hottes AEG qui sont dotées de cette fonction doivent avoir le symbole . Il peut arriver que d'autres appareils contrôlés à distance bloquent le signal. Pour éviter cela, ne faites pas fonctionner la commande à distance des autres appareils et la table de cuisson en même temps. 6.
www.aeg.com 7. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 7.1 En cas d'anomalie de fonctionnement Anomalie Cause possible Solution Vous ne pouvez pas mettre en fonctionnement la table de cuisson. La table de cuisson n'est pas connectée à une source d'alimentation électrique ou le branchement est incorrect. Vérifiez que la table de cuisson est correctement branchée à une source d'alimentation électrique.
FRANÇAIS 19 Anomalie Cause possible Solution La fonction Hob²Hood ne fonctionne pas. Vous avez couvert le bandeau de commande. Retirez l'objet du bandeau de commande. La fonction de démarrage automatique de la cuisson ne fonctionne pas. La zone est chaude. Laissez la zone refroidir suffisamment. Le niveau de cuisson le plus élevé est réglé. Le niveau de cuisson maximum offre la même puissance que la fonction. Le niveau de cuisson oscille entre deux niveaux.
www.aeg.com Anomalie s'affiche. Cause possible Solution Une erreur s'est produite dans la table de cuisson car un récipient a chauffé à vide. La fonction Arrêt automatique et la protection anti-surchauffe des zones sont activées. Éteignez la table de cuisson. Enlevez le récipient chaud. Au bout d'environ 30 secondes, remettez la zone en fonctionnement. Si le récipient était bien le problème, le message d'erreur disparaît. Le voyant de chaleur résiduelle peut rester allumé.
FRANÇAIS 8.4 Montage min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
www.aeg.com min. 12 mm min. 2 mm 8.5 Enceinte de protection Si vous utilisez une enceinte de protection (accessoire supplémentaire), l'espace de circulation d'air de 2 mm et le fond de protection installé directement sous la table de cuisson ne sont plus nécessaires. L'enceinte de protection n'est pas disponible dans tous les pays. Veuillez contacter votre revendeur local. Vous ne pouvez pas utiliser l'enceinte de protection si vous installez la table de cuisson au-dessus d'un four. 9.
FRANÇAIS 23 9.2 Caractéristiques des zones de cuisson Zone de cuisson Puissance noFonction Boosminale (réglage ter [W] de chaleur maximum) [W] Fonction Boos- Diamètre de ter durée maxi- l'ustensile de male [min] cuisson [mm] Avant gauche 2300 3200 10 125 - 210 Arrière gauche 2300 3200 10 125 - 210 Avant droite 1400 2500 4 125 - 145 Arrière droite 1800 2800 10 145 - 180 La puissance des zones de cuisson peut être légèrement différente des données indiquées par la table.
www.aeg.com • Si vous faites chauffer de l'eau, ne faites chauffer que la quantité dont vous avez réellement besoin. • Si possible, couvrez toujours les récipients de cuisson avec un couvercle pendant la cuisson. • Activez toujours la zone de cuisson après avoir posé le récipient dessus. • Placez les plus petits récipients sur les plus petites zones de cuisson. • Posez directement le récipient au centre de la zone de cuisson.
FRANÇAIS 25
www.aeg.
FRANÇAIS 27
867332696-A-382016 www.aeg.