GI844KS USER MANUAL FR Notice d'utilisation Table de cuisson
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................2 2. CONSIGNES DE SÉCURITÉ........................................................................................5 3. INSTALLATION............................................................................................................7 4. DESCRIPTION DE L'APPAREIL...................................................................................8 5.
FRANÇAIS 3 utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • • • AVERTISSEMENT : Il peut être dangereux de laisser chauffer de la graisse ou de l'huile sans surveillance sur une table de cuisson car cela pourrait provoquer un incendie. N'essayez JAMAIS d'éteindre un feu avec de l'eau. Éteignez l'appareil puis couvrez les flammes, par exemple avec un couvercle ou une couverture ignifuge. ATTENTION : Toute cuisson doit être surveillée. Une cuisson courte doit être surveillée en permanence.
FRANÇAIS 5 2. CONSIGNES DE SÉCURITÉ 2.1 Installation AVERTISSEMENT! L'appareil doit être installé uniquement par un professionnel qualifié. AVERTISSEMENT! Risque de blessure corporelle ou de dommages matériels. • Retirez l'intégralité de l'emballage. • N'installez pas et ne branchez pas un appareil endommagé. • Suivez scrupuleusement les instructions d'installation fournies avec l'appareil. • Respectez l'espacement minimal requis par rapport aux autres appareils et éléments.
www.aeg.com • Si la prise de courant est lâche, ne branchez pas la fiche d'alimentation secteur. • Ne tirez jamais sur le câble d'alimentation pour débrancher l'appareil. Tirez toujours sur la fiche. • N'utilisez que des systèmes d'isolation appropriés : des coupecircuits, des fusibles (les fusibles à visser doivent être retirés du support), un disjoncteur différentiel et des contacteurs. • L'installation électrique doit être équipée d'un dispositif d'isolement à coupure omnipolaire.
FRANÇAIS Soulevez toujours ces objets lorsque vous devez les déplacer sur la surface de cuisson. • Cet appareil est exclusivement destiné à un usage culinaire. Ne l'utilisez pas pour des usages autres que celui pour lequel il a été conçu, à des fins de chauffage par exemple. 2.4 Entretien et nettoyage • Nettoyez régulièrement l'appareil afin de maintenir le revêtement en bon état. • Éteignez l'appareil et laissez-le refroidir avant de le nettoyer.
www.aeg.com Si l'appareil est installé audessus d'un tiroir, la ventilation de la table de cuisson peut chauffer les éléments rangés dans le tiroir durant la cuisson. 516 766 75 25 335 46 550 490+1 min. 55 750+1 max R5 min. 1500 min. 28 min. min. 12 60 4. DESCRIPTION DE L'APPAREIL 4.1 Description de la table de cuisson 1 1 1 1 Zone de cuisson à induction 2 Bandeau de commande 1 2 4.
FRANÇAIS TouFonction che sensitive Commentaire 1 MARCHE/ARRÊT 2 Verrouillage / Dispositif de Pour verrouiller ou déverrouiller le bandeau sécurité enfants de commande. 3 Pause Pour activer et désactiver la fonction. 4 Bridge Pour activer et désactiver la fonction. - Indicateur du niveau de cuisson Pour indiquer le niveau de cuisson. - Voyants du minuteur des zones de cuisson Pour indiquer la zone à laquelle se réfère la durée sélectionnée.
www.aeg.com Écran d'affichage Description Verrouillage /Dispositif de sécurité enfants est activée. Le récipient est inapproprié ou trop petit, ou bien il n'y a pas de récipient sur la zone de cuisson. Arrêt automatique est activée. 4.4 OptiHeat Control (Voyant de chaleur résiduelle à trois niveaux) AVERTISSEMENT! Les zones de cuisson à induction génèrent la chaleur nécessaire directement sur le fond des récipients de cuisson. La vitrocéramique est chauffée par la chaleur des récipients.
FRANÇAIS Niveau de cuisson ,1-3 11 La table de cuisson s'éteint au bout de 6 heures 4-7 5 heures 8-9 4 heures 10 - 14 1,5 heure 5.3 Niveau de cuisson Pour régler ou modifier le niveau de cuisson : Appuyez sur le niveau de cuisson souhaité sur le bandeau de sélection, ou déplacez votre doigt sur le bandeau de sélection jusqu'à atteindre le niveau de cuisson souhaité. 5.5 Bridge La fonction s'active lorsque le récipient recouvre le centre des deux zones.
www.aeg.com 5.7 PowerBoost Pour désactiver la fonction : Cette fonction vous permet d'augmenter la puissance des zones de cuisson à induction. La fonction peut être activée pour la zone de cuisson à induction uniquement pour une durée limitée. Lorsque cette durée est écoulée, la zone de cuisson à induction revient automatiquement au niveau de cuisson le plus élevé. sélectionnez la zone de cuisson avec Reportez-vous au chapitre « Caractéristiques techniques ».
FRANÇAIS minuteur pour régler la durée. Lorsque la durée s'est écoulée, un signal sonore retentit et 00 clignote. Pour arrêter le signal sonore : appuyez sur . Cette fonction est sans effet sur le fonctionnement des zones de cuisson. 5.11 Dispositif de sécurité enfants Cette fonction permet d'éviter une utilisation involontaire de la table de cuisson. Pour activer la fonction : allumez la table de cuisson en appuyant sur . Ne sélectionnez pas de réglage de niveau de cuisson. Appuyez sur 5.
www.aeg.com • • • • vous appuyez sur Minuterie indépendante se termine Minuteur dégressif se termine vous posez un objet sur le bandeau de commande. manuellement, depuis la table de cuisson. Sur la plupart des hottes, le système de commande à distance est désactivé par défaut. Activez-le avant d'utiliser cette fonction. Pour plus d'informations, reportez-vous au manuel d'utilisation de la hotte. 5.
FRANÇAIS Éclaira- Faire Faire frige auto- bouillir1) re2) matique Mode H6 Activé Vitesse Vitesse du venti- du ventilateur 2 lateur 3 1) La table de cuisson détecte le processus d'ébullition et sélectionne la vitesse du ventilateur en fonction du mode automatique. 2) La table de cuisson détecte le processus de friture et sélectionne la vitesse du ventilateur en fonction du mode automatique. 3) Ce mode active le ventilateur et l'éclairage, sans tenir compte sur la température.
www.aeg.com 6. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 6.1 Récipients Sur les zones de cuisson à induction, un champ électromagnétique puissant chauffe les récipients très rapidement. Utilisez des récipients adaptés aux zones de cuisson à induction. Matériaux des récipients • adaptés : fonte, acier, acier émaillé, acier inoxydable, fond multicouche (homologué par le fabricant). • inadaptés : aluminium, cuivre, laiton, verre, céramique, porcelaine.
FRANÇAIS Niveau de cuisson Utilisation : Durée (min) 17 Conseils Conservez les aliments cuits au au bechaud. soin Placez un couvercle sur le récipient. 1-3 Sauce hollandaise, faire fondre : beurre, chocolat, gélatine. 5 - 25 Mélangez de temps en temps. 1-3 Solidifier : omelettes, œufs cocotte. 10 - 40 Couvrez pendant la cuisson. 3-5 Faire mijoter des plats à base de riz et de laitage, réchauffer des plats cuisinés.
www.aeg.com Hottes dotées de la fonction Hob²Hood Pour trouver la gamme complète des hottes dotées de cette fonction, consultez notre site web destiné aux consommateurs. Les hottes AEG qui sont dotées de cette fonction doivent porter le symbole . Les autres appareils télécommandés peuvent bloquer le signal. N'utilisez pas d'autre appareil télécommandé en même temps que la fonction de la table de cuisson. 7. ENTRETIEN ET NETTOYAGE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 7.
FRANÇAIS 19 8. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 8.1 En cas d'anomalie de fonctionnement Problème Cause probable Solution Vous ne pouvez pas allumer la table de cuisson ni la faire fonctionner. La table de cuisson n'est pas connectée à une source d'alimentation électrique ou le branchement est incorrect. Vérifiez que la table de cuisson est correctement branchée à une source d'alimentation électrique.
www.aeg.com Problème Cause probable Solution Hob²Hood ne fonctionne pas. Vous avez couvert le bandeau de commande. Retirez l'objet du bandeau de commande. Vous utilisez un très grand récipient qui bloque le signal. Utilisez un plus petit récipient, changez la zone de cuisson ou faites fonctionner la hotte manuellement. Démarrage automatique de La zone est chaude. la cuisson ne fonctionne pas. Laissez la zone de cuisson refroidir. Le niveau de cuisson le plus élevé est réglé.
FRANÇAIS Problème et un chiffre s'affichent. 21 Cause probable Solution Une erreur s'est produite dans la table de cuisson. Éteignez la table de cuisson et rallumez-la au bout de 30 secondes. Si s'affiche à nouveau, débranchez la table de cuisson de la prise électrique. Au bout de 30 secondes, rebranchez la table de cuisson. Si le problème persiste, contactez le service après-vente agréé. Un bip constant se déclenche. Le branchement électrique n'est pas adapté. 8.
www.aeg.com Zone de cuisson Puissance nominale (niveau de cuisson max.) [W] PowerBoost [W] PowerBoost Diamètre du rédurée maximale cipient [mm] [min] Arrière gauche 2300 3200 10 125 - 210 Avant centrale 1400 2500 4 125 - 145 Arrière droite 2300 3600 10 180 - 240 La puissance des zones de cuisson peut légèrement différer des données du tableau. Elle dépend de la matière et des dimensions du récipient.
FRANÇAIS • Activez toujours la zone de cuisson après avoir posé le récipient dessus. • Placez les plus petits récipients sur les plus petites zones de cuisson. • Posez directement le récipient au centre de la zone de cuisson. 23 • Vous pouvez utiliser la chaleur résiduelle pour conserver les aliments au chaud ou pour faire fondre. 11. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Recyclez les matériaux portant le électroniques. Ne jetez pas les appareils symbole .
867350000-A-362018 www.aeg.