GS60BI221 DE Benutzerinformation FR Notice d'utilisation IT Istruzioni per l’uso EN User manual 2 18 34 50
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMME . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie die mitgelieferte Anleitung sorgfältig vor der Montage und dem ersten Gebrauch des Geräts durch. Der Hersteller ist nicht dafür verantwortlich, wenn eine fehlerhafte Montage oder Verwendung Verletzungen und Schäden verursacht. Bewahren Sie die Anleitung zusammen mit dem Gerät für den zukünftigen Gebrauch auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Erstickungs- und Verletzungsgefahr oder Gefahr einer dauerhaften Behinderung.
www.aeg.com • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Wenden Sie sich zum Austausch des beschädigten Netzkabels an den Kundendienst oder einen Elektriker. • Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist. • Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät vom Stromnetz trennen möchten. Ziehen Sie dazu immer direkt am Netzstecker. 1.
DEUTSCH 2. GERÄTEBESCHREIBUNG 1 2 3 12 11 9 10 8 7 4 6 5 1 Oberer Sprüharm 7 Wasserhärtestufen-Wähler 2 Mittlerer Sprüharm 8 Klarspülmittel-Dosierer 3 Unterer Sprüharm 4 Filter 9 Waschmittelschublade 10 Besteckkorb 5 Typenschild 11 Unterkorb 6 Salzbehälter 12 Oberkorb 3.
www.aeg.com 1 Taste Ein/Aus 6 Taste Delay 2 Programmübersicht 3 Taste Program 7 Taste Start 4 Programm-Kontrolllampen 9 Taste Option 8 Kontrolllampen 5 Display Kontrolllampen Beschreibung Kontrolllampe „Multitab“. Kontrolllampe „ÖKO PLUS“. Kontrolllampe „Hauptspülgang“. Kontrolllampe „Klarspülphase“. Kontrolllampe „Trocknungsphase“. Kontrolllampe „Programmende“. Kontrolllampe „Klarspülmittel“. Diese Kontrolllampe erlischt während des Programmbetriebs. Kontrolllampe „Salz“.
DEUTSCH Programm 4) Verschmutzungsgrad Beladung Programmphasen Optionen Leicht verschmutzt Geschirr und Besteck Hauptspülgang 55 °C Spülgänge Normal verschmutzt Geschirr und Besteck Vorspülen ÖKO PLUS Hauptspülgang 50 °C Spülgänge Trocknen 1) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben. Es stellt dann automatisch die Wassertemperatur und -menge, den Energieverbrauch und die Programmdauer ein.
www.aeg.com 5.2 ÖKO PLUS Diese Funktion senkt die Temperatur in der Trocknungsphase. Der Energieverbrauch wird um 25 % gesenkt. Das Geschirr kann am Ende des Programms noch feucht sein. 5.3 Einschalten der Optionen • Schalten Sie die Optionen vor dem Programmstart ein oder aus. Sie können die Funktionen nicht ein- oder ausschalten, wenn ein Programm angelaufen ist.
DEUTSCH 9 WasserenthärterEinstellung Wasserhärte Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol/l Clarke Wasserhärtegrade Manuell Elektronisch 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.
www.aeg.com 6.2 Füllen des Salzbehälters 1. 2. 3. 4. 5. Drehen Sie den Deckel gegen den Uhrzeigersinn und öffnen Sie den Salzbehälter. Füllen Sie 1 Liter Wasser in den Salzbehälter (nur beim ersten Mal). Füllen Sie den Salzbehälter mit Geschirrspülsalz. Entfernen Sie das Salz, das sich um die Öffnung des Salzbehälters herum angesammelt hat. Drehen Sie den Deckel im Uhrzeigersinn, um den Salzbehälter zu schließen. VORSICHT! Beim Befüllen des Salzbehälters können Wasser und Salz austreten.
DEUTSCH • Leuchtet die Kontrolllampe „Klarspülmittel“, füllen Sie den Klarspülmittel-Dosierer. 3. Beladen Sie die Körbe. 11 4. Füllen Sie Reinigungsmittel ein. 5. Stellen Sie je nach Beladung und Verschmutzungsgrad das passende Programm ein. 7.1 Verwendung des Reinigungsmittels A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Einstellen und Starten eines Programms Einstellmodus Das Gerät muss sich für einige Einstellungen im Einstellmodus befinden.
www.aeg.com • Die Phasenkontrolllampen des eingestellten Programms erlöschen. • Nach Ablauf der Zeitvorwahl startet das Programm. – Die Anzeige des laufenden Programmabschnitts leuchtet auf. Öffnen der Tür während des Betriebs Wenn Sie die Tür öffnen, stoppt das Gerät. Wenn Sie die Tür wieder schließen, läuft das Gerät ab dem Zeitpunkt der Unterbrechung weiter.
DEUTSCH • Entfernen Sie Speisereste vom Geschirr. • Um eingebrannte Essensreste leicht zu beseitigen, weichen Sie diese ein, bevor Sie das Kochgeschirr in das Gerät stellen. • Ordnen Sie hohle Gefäße (z. B. Tassen, Gläser, Pfannen) mit der Öffnung nach unten ein. • Stellen Sie sicher, dass Geschirr und Besteck nicht aneinander haften. Mischen Sie Löffel mit anderem Besteck. • Achten Sie darauf, dass Gläser einander nicht berühren. • Ordnen Sie kleine Gegenstände in den Besteckkorb ein.
www.aeg.com 9.1 Reinigen der Filter C 1. Drehen Sie den Filter (A) nach links und nehmen Sie ihn heraus. 2. Um den Filter (A) auseinanderzubauen, ziehen Sie (A1) und (A2) auseinander. Nehmen Sie den Filter (B) heraus. Reinigen Sie die Filter mit Wasser. Setzen Sie den Filter (B) wieder in der ursprünglichen Position ein. Vergewissern Sie sich, dass er korrekt unter den beiden Führungen (C) sitzt. C A B A1 3. 4. 5. A2 6. Bauen Sie den Filter (A) zusammen und setzen Sie ihn in Filter (B) ein.
DEUTSCH können, bevor Sie den Kundendienst rufen. Bei manchen Störungen zeigt das Display einen Alarmcode an: • - Es läuft kein Wasser in das Gerät. • - Das Gerät pumpt das Wasser nicht ab. Problem • - Die Aquasafe-Einrichtung ist ausgelöst. WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen. Mögliche Ursache Mögliche Abhilfe Das Programm star- Der Netzstecker steckt tet nicht. nicht richtig in der Steckdose. Stecken Sie den Netzstecker richtig in die Steckdose.
www.aeg.com Tritt das Problem erneut auf, wenden Sie sich an den Kundendienst. Wenn das Display andere Alarmcodes anzeigt, wenden Sie sich an den Kundendienst. 10.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend. Weiße Streifen oder blau schimmernder Belag auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu hoch. Stellen Sie den Dosierwähler für Klarspülmittel niedriger ein. • Die Reinigungsmittelmenge ist zu hoch.
DEUTSCH 17 max. 60 °C Wasserversorgung 1) Kalt- oder Warmwasser2) Fassungsvermögen Gedecke Leistungsaufnahme Unausgeschaltet 0.10 W Ausgeschaltet 0.10 W 12 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B. Solaranlagen oder Windkraft) aufbereiten, können Sie durch den Anschluss des Geräts an die Heißwasserversorgung Energie sparen. 12.
www.aeg.com SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. CONSIGNES DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BANDEAU DE COMMANDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FRANÇAIS 1. 19 CONSIGNES DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT Risque d'asphyxie, de blessure ou d'invalidité permanente.
www.aeg.com Contactez le service après-vente ou un électricien pour remplacer le câble d'alimentation s'il est endommagé. • Ne connectez la fiche d'alimentation à la prise de courant qu'à la fin de l'installation. Assurez-vous que la prise de courant est accessible une fois l'appareil installé. • Ne tirez pas sur le câble électrique pour débrancher l'appareil. Tirez toujours sur la prise. 1.
FRANÇAIS 2. DESCRIPTION DE L'APPAREIL 1 2 3 12 11 9 10 8 7 4 6 5 1 Bras d'aspersion supérieur 7 Sélecteur de dureté de l'eau 2 Bras d'aspersion intermédiaire 8 Distributeur de liquide de rinçage 3 Bras d'aspersion inférieur 4 Filtres 9 Distributeur de produit de lavage 10 Panier à couverts 5 Plaque signalétique 11 Panier inférieur 6 Réservoir de sel régénérant 12 Panier supérieur 3.
www.aeg.com 1 Touche Marche/Arrêt 6 Touche Delay 2 Guide des programmes 3 Touche Program 7 Touche Start 4 Voyants des programmes 9 Touche Option 8 Voyants 5 Écran Voyants Description Voyant « Tout en 1 ». Voyant ÖKO PLUS. Voyant de phase de lavage. Voyant de phase de rinçage. Voyant de phase de séchage. Voyant de fin. Voyant du réservoir de liquide de rinçage. Ce voyant est éteint pendant le déroulement du programme. Voyant du réservoir de sel régénérant.
FRANÇAIS Programme 4) Type de charge Phases du programme Légèrement sale Vaisselle et couverts Lavage à 55 °C Rinçages Normalement sale Vaisselle et couverts Prélavage Lavage à 50 °C Rinçages Séchage 23 Options ÖKO PLUS 1) L'appareil détecte le degré de salissure et la quantité de vaisselle dans les paniers. Il règle automatiquement la température ainsi que le volume d'eau, la consommation d'énergie et la durée du programme.
www.aeg.com 5.2 ÖKO PLUS Cette fonction diminue la température pendant la phase de séchage. La consommation d'énergie diminue ainsi de 25 %. Il se peut que la vaisselle soit encore mouillée à la fin du programme. 5.3 Activation des options • Activez ou désactivez les options avant de démarrer un programme. Vous ne pouvez pas activer ni désactiver les options pendant le déroulement d'un programme.
FRANÇAIS 25 Réglage de l'adoucisseur d'eau Dureté de l'eau Degrés allemands (°dH) Degrés français (°tH) mmol/l Degrés Clarke Manuel Électronique 43 - 50 76 - 90 7.6 - 9.0 53 - 63 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.
www.aeg.com 6.2 Remplissage du réservoir de sel régénérant 1. 2. 3. 4. 5. Tournez le couvercle vers la gauche et ouvrez le réservoir de sel régénérant. Mettez 1 litre d'eau dans le réservoir de sel régénérant (uniquement la première fois). Remplissez le réservoir avec du sel régénérant. Enlevez le sel qui se trouve autour de l'ouverture du réservoir de sel régénérant. Tournez le couvercle vers la droite pour fermer le réservoir de sel régénérant.
FRANÇAIS • Si le voyant du réservoir de sel régénérant est allumé, remplissez le réservoir. • Si le voyant du liquide de rinçage est allumé, remplissez le distributeur de liquide de rinçage. 27 3. Chargez les paniers. 4. Ajoutez du produit de lavage. 5. Réglez et lancez le programme adapté au type de vaisselle et au degré de salissure. 7.1 Utilisation du produit de lavage A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.
www.aeg.com • Le délai clignote sur l'affichage. • Le voyant correspondant au départ différé s'allume. 3. Appuyez sur Start. Le décompte démarre. • L'affichage indique le décompte du départ différé par intervalles d'une heure. • Les voyants des phases correspondant au programme sélectionné s'éteignent. • Lorsque le décompte est terminé, le programme démarre. – Le voyant correspondant à la phase en cours s'allume.
FRANÇAIS 8.2 Chargement des paniers Reportez-vous à la brochure fournie pour consulter des exemples de charge des paniers. • Utilisez uniquement cet appareil pour laver des articles qui peuvent passer au lave-vaisselle. • Ne mettez pas dans le lave-vaisselle des articles en bois, en corne, en aluminium, en étain et en cuivre. • Ne placez pas dans l'appareil des objets pouvant absorber l'eau (éponges, chiffons de nettoyage). • Enlevez les restes d'aliments sur les articles.
www.aeg.com 9. ENTRETIEN ET NETTOYAGE AVERTISSEMENT Avant toute opération d'entretien, éteignez l'appareil et débranchez la prise secteur. Les filtres sales et les bras d'aspersion obstrués diminuent les résultats de lavage. Contrôlez-les régulièrement et nettoyez-les si nécessaire. 9.1 Nettoyage des filtres C 1. Tournez le filtre (A) vers la gauche et sortez-le. 2. Pour démonter le filtre (A), détachez (A1) et (A2). Retirez le filtre (B). Lavez les filtres à l'eau courante.
FRANÇAIS 31 10. EN CAS D'ANOMALIE DE FONCTIONNEMENT L'appareil ne démarre pas ou s'arrête en cours de programme. Veuillez vous reporter aux informations suivantes avant de contacter le service après-vente pour résoudre un problème. Pour certaines anomalies, l'écran affiche un code d’alarme : • - L'appareil n'est pas approvisionné en eau. • • - L'appareil ne se vidange pas. - Le système de sécurité anti-débordement s'est déclenché. AVERTISSEMENT Éteignez l'appareil avant de procéder aux vérifications.
www.aeg.com 10.1 Si les résultats de lavage et de séchage ne sont pas satisfaisants Traînées blanchâtres ou pellicules bleuâtres sur les verres et la vaisselle • La quantité de liquide de rinçage libérée est trop importante. Placez le sélecteur de dosage du liquide de rinçage sur le niveau le plus faible. • La quantité de produit de lavage est excessive. Taches et traces de gouttes d'eau séchées sur les verres et la vaisselle • La quantité de liquide de rinçage libérée n'est pas suffisante.
FRANÇAIS 33 Pression de l'arrivée d'eau Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 ) Arrivée d'eau 1) Eau froide ou eau chaude2) Capacité Couverts Consommation électrique Mode « Veille » 0.10 W Mode « Arrêt » 0.10 W max. 60 °C 12 1) Raccordez le tuyau d'arrivée d'eau à un robinet fileté (3/4 pouce).
www.aeg.com INDICE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. ISTRUZIONI DI SICUREZZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIZIONE DEL PRODOTTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PANNELLO DEI COMANDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ITALIANO 1. 35 ISTRUZIONI DI SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. Il produttore non è responsabile se un'installazione ed un uso non corretto dell'apparecchiatura provocano lesioni e danni. Tenere sempre le istruzioni a portata di mano in caso di necessità durante l'utilizzo. 1.1 Sicurezza dei bambini e delle persone vulnerabili AVVERTENZA! Rischio di soffocamento, lesioni o invalidità permanente.
www.aeg.com qualificato per sostituire un cavo danneggiato. • Inserire la spina di alimentazione nella presa solo al termine dell'installazione. Verificare che la spina di alimentazione rimanga accessibile dopo l'installazione. • Non tirare il cavo di alimentazione per scollegare l’apparecchiatura. Tirare solo la spina. 1.
ITALIANO 2. DESCRIZIONE DEL PRODOTTO 1 2 3 12 11 9 10 8 7 4 6 5 1 Mulinello sul cielo vasca 7 Selettore della durezza dell'acqua 2 Mulinello superiore 8 Contenitore del brillantante 3 Mulinello inferiore 4 Filtri 9 Contenitore del detersivo 10 Cestello posate 5 Targhetta dati 11 Cestello inferiore 6 Contenitore del sale 12 Cestello superiore 3.
www.aeg.com 1 Tasto on/off 6 Tasto Delay 2 Guida programma 3 Tasto Program 7 Tasto Start 4 Spie del programma 9 Tasto Option 8 Spie 5 Display Spie Descrizione Spia della funzione Multitab. SpiaÖKO PLUS . Spia fasi di lavaggio. Spia fase di risciacquo. Spia della fase di asciugatura. Spia di fine. Spia del brillantante. La spia è spenta durante l'esecuzione del programma. Spia del sale. La spia è spenta durante l'esecuzione del programma. Spia della partenza ritardata. Spia porta.
ITALIANO Programma 4) Grado di sporco Tipo di carico Fasi del programma Opzioni Sporco normale Stoviglie e posate Prelavaggio Lavaggio 50°C Risciacqui Asciugatura ÖKO PLUS 39 1) L'apparecchiatura rileva il grado di sporco e la quantità di stoviglie presenti nei cestelli. Regola automaticamente la temperatura e la quantità dell'acqua, il consumo di elettricità e la durata del programma. 2) Questo programma prevede una fase di risciacquo ad alta temperatura per garantire migliori risultati igienici.
www.aeg.com 5.3 Attivazione delle opzioni • Attivare o disattivare le opzioni prima di avviare un programma. Non è possibile attivare o disattivare le opzioni quando un programma è in corso. Premere il tasto Option ÖKO PLUS 1 volta on off 2 volte off on 3 volte on on 4 volte off off utilizzare il detersivo, il brillantante e il sale per lavastoviglie separatamente, eseguire le seguenti operazioni: 1. Disattivare la funzione Multitab. 2.
ITALIANO 41 Regolazione del decalcificatore dell'acqua Durezza dell'acqua Tedesco gradi (°dH) Francese gradi (°fH) mmol/l Gradi Clarke Manuale Elettronica 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Impostazione di fabbrica. 2) Non utilizzare il sale a questo livello. Il decalcificatore dell’acqua deve essere regolato manualmente ed elettronicamente.
www.aeg.com 6.2 Riempire il contenitore del sale 1. 2. 3. 4. 5. Ruotare il tappo in senso antiorario e aprire il contenitore del sale. Versare 1 litro d’acqua nel contenitore del sale (solo la prima volta). Riempire il contenitore del sale. Togliere l'eventuale sale rimasto attorno all'apertura del contenitore. Riavvitare il tappo in senso orario per chiudere il contenitore del sale. ATTENZIONE Acqua e sale potrebbero fuoriuscire dal contenitore del sale durante il riempimento. Rischio di corrosione.
ITALIANO 4. Aggiungere il detersivo. 43 5. Impostare ed avviare il programma corretto per il tipo di carico ed il grado di sporco. 7.1 Utilizzo del detersivo A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Impostazione ed avvio di un programma Modalità impostazione L’apparecchiatura deve essere in modalità impostazione per poter avviare alcune operazioni. L’apparecchiatura è in modalità impostazione quando, dopo l'accensione: • Tutte le spie del programma si accendono.
www.aeg.com • Appena è completato il conto alla rovescia, il programma si avvia. – La spia della fase in corso si accende. Verificare che vi sia del detersivo nell'apposito contenitore prima di avviare un nuovo programma. Al termine del programma Apertura della porta quando l’apparecchiatura è in funzione Se la porta viene aperta, l’apparecchiatura si arresta. Quando si chiude nuovamente la porta, l'apparecchiatura riprende dal punto in cui era stata interrotta.
ITALIANO • Per rimuovere senza fatica tracce di bruciato, lasciare pentole e recipienti a bagno nell'acqua prima di introdurli nell'apparecchiatura. • Disporre gli utensili cavi (tazze, bicchieri e padelle) con l’apertura rivolta verso il basso. • Assicurarsi che le posate e i piatti non aderiscano tra loro. Mescolare i cucchiai con le altre posate. • Verificare che i bicchieri non si tocchino l’un l’altro. • Disporre gli oggetti piccoli nel cestello portaposate.
www.aeg.com 9.1 Pulizia dei filtri C 1. Ruotare il filtro (A) in senso antiorario e rimuoverlo. 2. Per smontare il filtro (A), estrarre (A1) e (A2). Rimuovere il filtro (B). Sciacquare i filtri con acqua. Ricollocare il filtro (B) nella posizione iniziale. Verificare che sia montato correttamente sotto le due guide (C). C A B A1 3. 4. 5. A2 6. Montare il filtro (A) e posizionarlo all'interno del filtro (B). Ruotarlo in senso orario finché non si blocca in posizione.
ITALIANO per tentare di trovare una soluzione al problema. Il display visualizza un codice allarme in alcuni casi: • - L'apparecchiatura non carica l'acqua. • - L'apparecchiatura non scarica l'acqua. Problema • 47 - Il dispositivo antiallagamento è attivo. Causa possibile Il programma non si La spina non è inserita nelavvia. la presa di alimentazione. La porta dell'apparecchiatura è aperta. AVVERTENZA! Spegnere l'apparecchiatura prima di eseguire i controlli.
www.aeg.com 10.1 Se i risultati di lavaggio e di asciugatura non sono soddisfacenti Attivazione del contenitore del brillantante con la funzione Multitab attivata Su bicchieri e stoviglie rimangono delle striature biancastre o striature bluastre • La quantità di brillantante erogata è eccessiva. Impostare il selettore del brillantante nella posizione inferiore. • È stata utilizzata una dose eccessiva di detersivo. 1. Premere il tasto on/off per accendere l’apparecchiatura. 2.
ITALIANO Pressione dell’acqua di Min./max. (bar/MPa) alimentazione 49 (0.5 / 0.05 ) / (8 / 0.8 ) Collegamento dell'acqua 1) Acqua fredda o calda2) max. 60°C Capacità Coperti Assorbimento elettrico Modalità left-on 0.10 W Modalità Off 0.10 W 12 1) Collegare il tubo di carico dell'acqua a un rubinetto con filettatura 3/4". 2) Consigliamo il collegamento all'acqua calda se prodotta mediante utilizzo di fonti di energia alternativa (per es.
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 51 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. • The first time you use the appliance, make sure that there is no leakage. • The water inlet hose has a safety valve and a sheath with an inner mains cable. 1.
www.aeg.com 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments. WARNING! Risk of injury. • Do not change the specification of this appliance. • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position.
ENGLISH 2. PRODUCT DESCRIPTION 1 2 3 12 11 9 10 8 7 4 6 5 1 Top spray arm 7 Water hardness dial 2 Upper spray arm 8 Rinse aid dispenser 3 Lower spray arm 4 Filters 9 Detergent dispenser 10 Cutlery basket 5 Rating plate 11 Lower basket 6 Salt container 12 Upper basket 3.
www.aeg.com 1 On/off button 6 Delay button 2 Programme guide 3 Program button 7 Start button 4 Programme indicators 9 Option button 8 Indicators 5 Display Indicators Description Multitab indicator. ÖKO PLUS indicator. Washing phase indicator. Rinsing phase indicator. Drying phase indicator. End indicator. Rinse aid indicator. This indicator is off while the programme operates. Salt indicator. This indicator is off while the programme operates. Delay indicator. Door indicator.
ENGLISH Programme 4) Degree of soil Type of load Programme phases Options Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry ÖKO PLUS 55 1) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the programme duration. 2) This programme has a high temperature rinsing phase for better hygiene results.
www.aeg.com cannot activate or deactivate the options while a programme operates. Press Option button ÖKO PLUS 1 time on off 2 times off on 3 times on on 4 times off off 2. Adjust the water softener to the highest level. 3. Make sure that the salt container and the rinse aid dispenser are full. 4. Start the shortest programme with a rinsing phase, without detergent and without dishes. 5. Adjust the water softener to the water hardness in your area. 6.
ENGLISH 57 Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Electronic 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Factory position. 2) Do not use salt at this level. You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. 2.
www.aeg.com 6.2 Filling the salt container 1. 2. 3. 4. 5. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out from the salt container when you fill it. Risk of corrosion.
ENGLISH 59 7.1 Using the detergent A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Setting and starting a programme Setting mode The appliance must be in setting mode to accept some operations. The appliance is in setting mode when, after the activation: • All the programme indicators come on. • The display shows two horizontal status bars. If the control panel shows other conditions, press and hold Delay and Start at the same time until the appliance is in setting mode.
www.aeg.com Cancelling the delay start while the countdown operates Press Delay again and again until: • The display shows the programme duration. • The phase indicators come on. • The programme starts. Cancelling the programme Press and hold Delay and Start at the same time until: • All the programme indicators come on. • The display shows 2 horizontal status bars. Make sure that there is detergent in the detergent dispenser before you start a new programme. 1.
ENGLISH • Make sure that the spray arms can move freely before you start a programme. 8.3 Using salt, rinse aid and detergent • Only use salt, rinse aid and detergent for dishwasher. Other products can cause damage to the appliance. • The rinse aid helps, during the last rinsing phase, to dry the dishes without streaks and stains. • Combi detergent tablets contain detergent, rinse aid and other added agents. Be sure that these tablets are applicable to the water hardness in your area.
www.aeg.com 2. A1 3. 4. 5. A2 6. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C). Assemble the filter (A) and put it into position in filter (B). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance. 9.2 Cleaning the spray arms Do not remove the spray arms.
ENGLISH Problem The appliance does not fill with water. Possible cause Possible solution You did not press Start. Press Start. The fuse in the fuse box is damaged. Replace the fuse. The delay start is set. Cancel the delay start or wait for the end of the countdown. The water tap is closed. Open the water tap. The water pressure is too low. Contact your local water authority. 63 The water tap is clogged or Clean the water tap. there is limescale on it.
www.aeg.com 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3. Press and hold Delay and Start at the same time until the indicators (A), (B) and (C) flash. 4. Press Option . • The indicators (A) and (C) go off. • The indicator (B) continues to flash. • The display shows the setting of the rinse aid dispenser. Off On 5. Press Option to change the setting. 6. Deactivate the appliance to confirm. 7. Adjust the released quantity of rinse aid. 8.
ENGLISH 65
www.aeg.
ENGLISH 67
117924481-A-212012 www.aeg.