GS60BV222 DE Benutzerinformation FR Notice d'utilisation IT Istruzioni per l’uso EN User manual 2 19 36 52
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PROGRAMME . . . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Es besteht Erstickungsgefahr, Risiko von Verletzungen oder permanenten Behinderungen.
www.aeg.com Ummantelung mit einem innenliegenden Netzkabel. • • • WARNUNG! Gefährliche Spannung. • Ziehen Sie sofort den Netzstecker aus der Steckdose, wenn der Wasserzulaufschlauch beschädigt ist. Wenden Sie sich für den Austausch des Wasserzulaufschlauchs an den Kundendienst. 1.3 Gebrauch • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
DEUTSCH 5 2. GERÄTEBESCHREIBUNG 1 2 3 12 11 10 9 8 1 Oberer Sprüharm 2 Mittlerer Sprüharm 3 Unterer Sprüharm 4 Filter 5 Typenschild 6 Salzbehälter 7 Wasserhärtestufen-Wähler 8 Klarspülmittel-Dosierer 9 Waschmittelschublade 10 Besteckkorb 11 Unterkorb 12 Oberkorb 2.1 Beam-on-Floor Der Beam-on-Floor ist ein Lichtstrahl, der unterhalb der Gerätetür auf den Boden projiziert wird.
www.aeg.com 3. BEDIENFELD 2 1 3 4 5 6 7 8 1 Taste „Ein/Aus“ 6 TimeSaver-Taste 2 Display 3 Delay-Taste 7 Multitab-Taste 4 Program-Taste 9 Kontrolllampen 9 8 RESET-Taste 5 ExtraHygiene-Taste Kontrolllam- Beschreibung pen Anzeige „Salz“. Sie erlischt während des Programmbetriebs. Anzeige „Klarspülmittel“. Sie erlischt während des Programmbetriebs. Anzeige „Programmende“. 4.
DEUTSCH Programm Verschmutzungsgrad Beladung Programmphasen 5 Normal verschmutzt Geschirr und Besteck Vorspülen ExtraHygiene Hauptspülgang 50 °C TimeSaver Spülgänge Trocknen 5) Optionen 1) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben. Es stellt dann automatisch die Wassertemperatur und -menge, den Energieverbrauch und die Programmdauer ein. 2) Dieses Programm enthält eine Spülphase mit hoher Temperatur, um hygienischere Spülergebnisse zu liefern.
www.aeg.com Informationen für Prüfinstitute Möchten Sie Informationen zum Leistungstest erhalten, schicken Sie eine E-Mail an: info.test@dishwasher-production.com Notieren Sie die Produktnummer (PNC), die Sie auf dem Typenschild finden. 5. OPTIONEN Schalten Sie die Optionen vor dem Programmstart ein oder aus. Sie können die Optionen nicht ein- oder ausschalten, wenn ein Programm angelaufen ist.
DEUTSCH 5.4 Signaltöne Die Signaltöne ertönen im Fall einer Gerätestörung, bei Einstellung der Wasserenthärterstufe und am Programmende. Standardmäßig sind diese Signaltöne eingeschaltet, es ist jedoch möglich, sie auszuschalten. Ausschalten der akustischen Signale 1. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. Stellen Sie sicher, dass sich das Gerät im Einstellmodus befindet, siehe Abschnitt „Einstellen und Starten eines Programms“. 2.
www.aeg.com Wasserenthärtereinstellung Wasserhärte Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol/l Clarke Wasserhärtegrade Manuell Elektronisch 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Werkseinstellung. 2) Verwenden Sie kein Salz bei diesen Werten.
DEUTSCH 11 6.2 Füllen des Salzbehälters 1. 2. 3. 4. 5. Drehen Sie den Deckel gegen den Uhrzeigersinn und öffnen Sie den Salzbehälter. Füllen Sie 1 Liter Wasser in den Salzbehälter (nur beim ersten Mal). Füllen Sie den Salzbehälter mit Geschirrspülsalz. Entfernen Sie das Salz, das sich um die Öffnung des Salzbehälters herum angesammelt hat. Drehen Sie den Deckel im Uhrzeigersinn, um den Salzbehälter zu schließen. VORSICHT! Beim Befüllen des Salzbehälters können Wasser und Salz austreten.
www.aeg.com • Leuchtet die Kontrolllampe „Klarspülmittel“, füllen Sie den Klarspülmittel-Dosierer. 3. Beladen Sie die Körbe. 4. Füllen Sie Reinigungsmittel ein. • Wenn Sie die Kombi-Reinigungstabletten verwenden, schalten Sie die Option Multitab ein. 5. Stellen Sie je nach Beladung und Verschmutzungsgrad das passende Programm ein. 7.1 Verwendung des Reinigungsmittels A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.
DEUTSCH dem Zeitpunkt der Unterbrechung weiter. Abbrechen einer eingestellten Zeitvorwahl während des Countdowns Wenn Sie die Zeitvorwahl abbrechen, wird auch das Programm abgebrochen. 1. Drücken Sie „RESET“. Im Display werden zwei horizontale Balken angezeigt. 2. Wählen Sie das Programm neu. Beenden des Programms 1. Drücken Sie „RESET“. Im Display werden zwei horizontale Balken angezeigt. Bevor Sie ein neues Programm starten, stellen Sie sicher, dass der Reinigungsmittelbehälter gefüllt ist. 13 1.
www.aeg.com menge. Siehe hierzu die Angaben auf der Reinigungsmittelverpackung. 8.3 Beladen der Körbe Beispiele für die Beladung der Körbe finden Sie in der mitgelieferten Broschüre. • Spülen Sie im Gerät nur spülmaschinenfestes Geschirr. • Spülen Sie im Gerät keine Geschirrteile aus Holz, Horn, Aluminium, Zinn oder Kupfer. • Spülen Sie in diesem Gerät keine Gegenstände, die Wasser aufnehmen können (Schwämme, Geschirrtücher, usw.). • Entfernen Sie Speisereste vom Geschirr.
DEUTSCH 15 9.1 Reinigen der Filter C 1. Drehen Sie den Filter (A) nach links und nehmen Sie ihn heraus. 2. Um den Filter (A) auseinanderzubauen, ziehen Sie (A1) und (A2) auseinander. Nehmen Sie den Filter (B) heraus. Reinigen Sie die Filter mit Wasser. Prüfen Sie, bevor Sie den Filter (B) wieder einsetzen, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. C A B A1 3. 4. 5. A2 6. 7.
www.aeg.com können, bevor Sie den Kundendienst rufen. Bei manchen Störungen zeigt das Display einen Alarmcode an: • - Es läuft kein Wasser in das Gerät. • - Das Gerät pumpt das Wasser nicht ab. • - Die Aquasafe-Einrichtung ist ausgelöst. WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen. Problem Mögliche Abhilfe Das Gerät lässt sich nicht einschalten. Überprüfen Sie, ob der Netzstecker in die Netzsteckdose eingesteckt ist.
DEUTSCH • Die Reinigungsmittelmenge ist zu hoch. Wasserflecken und andere Flecken auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu niedrig. Stellen Sie den Dosierwähler für Klarspülmittel höher ein. • Die Ursache kann in der Qualität des Reinigungsmittels liegen. Das Geschirr ist noch nass. • Das Programm enthält keine Trocknungsphase oder eine Trocknungsphase mit niedriger Temperatur. • Der Klarspülmittel-Dosierer ist leer. • Die Ursache kann in der Qualität des Klarspülmittels liegen.
www.aeg.com 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B. Solaranlagen oder Windkraft) aufbereiten, können Sie durch den Anschluss des Geräts an die Heißwasserversorgung Energie sparen. 12. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern.
FRANÇAIS 19 SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BANDEAU DE COMMANDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. INSTRUCTIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT Risque d'asphyxie, de blessure ou d'invalidité permanente.
FRANÇAIS AVERTISSEMENT Tension dangereuse. • Si le tuyau d'arrivée d'eau est endommagé, débranchez immédiatement la fiche de la prise secteur. Contactez le service après-vente pour remplacer le tuyau d'arrivée d'eau. 1.
www.aeg.com 2. DESCRIPTION DE L'APPAREIL 1 2 3 12 11 10 9 8 1 Bras d'aspersion supérieur 2 Bras d'aspersion intermédiaire 3 Bras d'aspersion inférieur 4 Filtres 5 Plaque signalétique 6 Réservoir de sel régénérant 7 Sélecteur de dureté de l'eau 8 Distributeur de liquide de rinçage 9 Distributeur de produit de lavage 10 Panier à couverts 11 Panier inférieur 12 Panier supérieur 2.1 Beam-on-Floor Le faisceau Beam-on-Floor est une lumière projetée sur le sol, sous la porte de l'appareil.
FRANÇAIS 3. BANDEAU DE COMMANDE 2 1 3 4 5 6 7 8 9 1 Touche Marche/Arrêt 6 TimeSaver Touche 2 Affichage 3 Delay Touche 7 Multitab Touche 4 Program Touche 9 Voyants 8 RESET Touche 5 ExtraHygiene Touche Voyants Description Voyant du réservoir de sel régénérant. Ce voyant est toujours éteint pendant le déroulement du programme. Voyant du réservoir de liquide de rinçage. Ce voyant est toujours éteint pendant le déroulement du programme. Voyant de fin. 4.
www.aeg.com Programme Degré de salissure Type de vaisselle Phases du programme Options 5 Normalement sale Vaisselle et couverts Prélavage Lavage à 50 °C Rinçages Séchage ExtraHygiene TimeSaver 5) 1) L'appareil détecte le degré de salissure et la quantité de vaisselle dans les paniers. Il règle automatiquement la température ainsi que le volume d'eau, la consommation d'énergie et la durée du programme.
FRANÇAIS 25 Informations pour les instituts de test Pour toute information relative aux performances de test, envoyez un courrier électronique à l'adresse : info.test@dishwasher-production.com Notez le numéro du produit (PNC) situé sur la plaque signalétique. 5. OPTIONS Activez ou désactivez les options avant de démarrer un programme. Vous ne pouvez pas activer ni désactiver les options pendant le déroulement d'un programme.
www.aeg.com 5.4 Signaux sonores Les signaux sonores retentissent en cas de dysfonctionnement de l'appareil, lors de l'ajustement du niveau de l'adoucisseur d'eau et à la fin du programme. Par défaut, les signaux sonores sont activés, mais il est possible de les désactiver. Comment désactiver les signaux sonores 1. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil. Assurez-vous que l'appareil est en mode Programmation ; reportez-vous au chapitre « Réglage et départ d'un programme ». 2.
FRANÇAIS 27 Réglage de l'adoucisseur d'eau Dureté de l'eau Degrés allemands (°dH) Degrés français (°fH) mmol/l Degrés Clarke Manuel Électronique 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Réglage d'usine. 2) N'utilisez pas de sel à ce niveau. L'adoucisseur d'eau doit être réglé manuellement et électroniquement.
www.aeg.com 6.2 Remplissage du réservoir de sel régénérant 1. 2. 3. 4. 5. Tournez le couvercle vers la gauche et ouvrez le réservoir de sel régénérant. Mettez 1 litre d'eau dans le réservoir de sel régénérant (uniquement la première fois). Remplissez le réservoir avec du sel régénérant. Enlevez le sel qui se trouve autour de l'ouverture du réservoir de sel régénérant. Tournez le couvercle vers la droite pour fermer le réservoir de sel régénérant.
FRANÇAIS • Si le voyant du réservoir de sel régénérant est allumé, remplissez le réservoir. • Si le voyant du liquide de rinçage est allumé, remplissez le distributeur de liquide de rinçage. 3. Chargez les paniers. 29 4. Ajoutez du produit de lavage. • Si vous utilisez des pastilles de détergent multifonctions, activez l'option Multitab. 5. Réglez et lancez le programme adapté au type de vaisselle et au degré de salissure. 7.1 Utilisation du produit de lavage A 1. B 2. 30 3.
www.aeg.com Annulation du départ différé au cours du décompte En annulant le départ différé, vous annulez également le programme. 1. Appuyez sur la touche RESET. Deux lignes horizontales s'affichent. 2. Sélectionnez à nouveau le programme. Annulation du programme 1. Appuyez sur la touche RESET. Deux lignes horizontales s'affichent. Assurez-vous que le distributeur de produit de lavage n'est pas vide avant de démarrer un nouveau programme de lavage.
FRANÇAIS 8.3 Chargement des paniers Reportez-vous à la brochure fournie pour consulter des exemples de charge des paniers. • Utilisez uniquement cet appareil pour laver des articles qui peuvent passer au lave-vaisselle. • Ne mettez pas dans le lave-vaisselle des articles en bois, en corne, en aluminium, en étain et en cuivre. • Ne placez pas dans l'appareil des objets pouvant absorber l'eau (éponges, chiffons de nettoyage). • Enlevez les restes d'aliments sur les articles.
www.aeg.com 2. 3. 4. 5. A1 A2 6. 7. Pour démonter le filtre (A), détachez (A1) et (A2). Retirez le filtre (B). Lavez les filtres à l'eau courante. Avant de remettre le filtre (B) en place, assurez-vous qu'il ne reste aucun résidu alimentaire ni salissure à l'intérieur ou autour du bord du collecteur d'eau. Assurez-vous que le filtre (B) est correctement positionné, sous les 2 guides (C). Assemblez le filtre (A) et remettez-le en place dans le filtre (B). Tournez-le vers la droite jusqu'à la butée.
FRANÇAIS Problème 33 Solution possible Si vous avez sélectionné un départ différé, annulez-le ou attendez la fin du décompte. L'appareil ne se remplit pas d'eau. Assurez-vous que le robinet d'eau est ouvert. Assurez-vous que la pression de l'arrivée d'eau n'est pas trop basse. Pour obtenir cette information, contactez votre compagnie des eaux. Assurez-vous que le robinet d'eau n'est pas obstrué. Assurez-vous que le filtre du tuyau d'arrivée d'eau n'est pas obstrué.
www.aeg.com 10.2 Comment activer le distributeur de liquide de rinçage Le distributeur de liquide de rinçage ne peut être activé que lorsque l'option Multitab est activée. 1. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil. Assurez-vous que l'appareil est en mode Programmation ; reportez-vous au chapitre « Réglage et départ d'un programme ». 2. Appuyez simultanément sur les touches Program et ExtraHygiene jusqu'à ce que les voyants Delay, Program et ExtraHygiene se mettent à clignoter. 3.
FRANÇAIS 35 12. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Recyclez les matériaux portant le symbole . Déposez les emballages dans les conteneurs prévus à cet effet. Contribuez à la protection de l'environnement et à votre sécurité, recyclez vos produits électriques et électroniques. Ne jetez pas les appareils portant le symbole avec les ordures ménagères. Emmenez un tel produit dans votre centre local de recyclage ou contactez vos services municipaux.
www.aeg.com INDICE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. ISTRUZIONI DI SICUREZZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIZIONE DEL PRODOTTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PANNELLO DEI COMANDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ITALIANO 1. 37 ISTRUZIONI DI SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. Il produttore non è responsabile se un'installazione ed un uso non corretto dell'apparecchiatura provocano lesioni e danni. Tenere sempre le istruzioni a portata di mano in caso di necessità durante l'utilizzo. 1.1 Sicurezza dei bambini e delle persone vulnerabili AVVERTENZA! Rischio di soffocamento, lesioni o invalidità permanente.
www.aeg.com AVVERTENZA! Pericolo di tensione. • Se il tubo di carico è danneggiato, scollegare immediatamente la spina dalla presa elettrica. Contattare il Centro di Assistenza per sostituire il tubo di carico dell’acqua. 1.3 Utilizzo • L'apparecchiatura è destinata all'uso domestico e applicazioni simili, come: – Cucine di negozi, uffici e altri ambienti di lavoro – Fattorie – Clienti di hotel, motel e altri ambienti residenziali – Bed and breakfast.
ITALIANO 39 2. DESCRIZIONE DEL PRODOTTO 1 2 3 12 11 10 9 8 1 Mulinello sul cielo vasca 2 Mulinello superiore 3 Mulinello inferiore 4 Filtri 5 Targhetta dati 6 Contenitore del sale 7 Selettore della durezza dell'acqua 8 Contenitore del brillantante 9 Contenitore del detersivo 10 Cestello posate 11 Cestello inferiore 12 Cestello superiore 2.1 Beam-on-Floor Il Beam-on-Floor è un fascio di luce proiettato sul pavimento al di sotto della porta dell'apparecchiatura.
www.aeg.com 3. PANNELLO DEI COMANDI 2 1 3 4 5 6 7 8 1 Tasto on/off 6 TastoTimeSaver 2 Display 3 TastoDelay 7 TastoMultitab 4 TastoProgram 9 Spie 9 8 TastoRESET 5 TastoExtraHygiene Spie Descrizione Spia del sale. La spia è spenta durante l'esecuzione del programma. Spia del brillantante. La spia è spenta durante l'esecuzione del programma. Spia di fine. 4.
ITALIANO 41 1) L'apparecchiatura rileva il grado di sporco e la quantità di stoviglie presenti nei cestelli. Regola automaticamente la temperatura e la quantità dell'acqua, il consumo di elettricità e la durata del programma. 2) Questo programma prevede una fase di risciacquo ad alta temperatura per garantire migliori risultati igienici. Durante la fase di risciacquo, la temperatura viene mantenuta a 70°C per almeno 10 minuti. 3) Questo è il programma di lavaggio più silenzioso.
www.aeg.com 5. OPZIONI Attivare o disattivare le opzioni prima di avviare un programma. Non è possibile attivare o disattivare le opzioni quando un programma è in corso. Questa opzione disattiva l'erogazione di brillantante e sale. Le rispettive spie sono disattivate. La durata del programma può aumentare. Se sono state impostate una o più opzioni, assicurarsi che le rispettive spie siano accese prima di avviare il programma. Come attivare l'opzione Multitab 1.
ITALIANO • La spia ExtraHygiene continua a lampeggiare. • Il display mostra l'impostazione corrente. 43 4. Premere ExtraHygiene per cambiare l'impostazione. 5. Premere il tasto On/Off per spegnere l’apparecchiatura e confermare l'impostazione. Segnali acustici attivi. Segnali acustici non attivi. 6. PREPARAZIONE AL PRIMO UTILIZZO 1. Accertarsi che il livello del decalcificatore dell'acqua preimpostato dalla fabbrica sia conforme alla durezza dell'acqua locale.
www.aeg.com Impostazione manuale Ruotare il selettore della durezza dell'acqua nella posizione 1 o 2. Impostazione elettronica 1. Premere il tasto On/Off per accendere l’apparecchiatura. Verificare che l'apparecchiatura sia in modalità impostazione, fare riferimento al capitolo 'Impostazione ed avvio di un programma". 2. Tenere premuti Program e ExtraHygiene contemporaneamente finché le spie Delay, Program , e ExtraHygiene lampeggiano. 3. Premere Delay. • Le spie Program e ExtraHygiene si spengono.
ITALIANO 45 6.3 Riempire il contenitore del brillantante 1. B A M AX 4 3 2 1 + - C D Premere il pulsante di sgancio (D) per aprire il coperchio (C). 2. Riempire il contenitore del brillantante (A) non oltre il segno di “max.”. 3. Rimuovere l'eventuale brillantante fuoriuscito con un panno assorbente, per evitare che si formi troppa schiuma. 4. Chiudere il coperchio. Assicurarsi che il pulsante di sgancio si blocchi in posizione.
www.aeg.com 7.2 Impostazione ed avvio di un programma Modalità impostazione Per alcune impostazioni, è necessario che l'apparecchiatura sia in modalità impostazione. Premere il tasto On/Off per accendere l’apparecchiatura. L'apparecchiatura si trova in modalità impostazione quando il display mostra 2 barre di stato orizzontali. Se il pannello dei comandi non mostra questa condizione, premere RESET. Avvio del programma senza partenza ritardata 1. Aprire il rubinetto dell’acqua. 2.
ITALIANO Importante • Lasciare raffreddare i piatti prima di estrarli dalla lavastoviglie. e stoviglie calde possono essere più facilmente danneggiabili. 47 • Vuotare prima il cestello inferiore e quindi quello superiore. • Sulle pareti laterali e sulla porta della lavastoviglie può formarsi della condensa. Perché l'acciaio inox si raffredda più velocemente della ceramica 8. CONSIGLI E SUGGERIMENTI UTILI 8.
www.aeg.com • I filtri siano puliti e installati correttamente. • I fori sui mulinelli non siano ostruiti. • Le stoviglie siano riposte correttamente nei cestelli. • Il programma sia adatto al tipo di carico e al grado di sporco. • Si utilizzi la quantità corretta di detersivo e additivi. • Siano presenti il sale per lavastoviglie e il brillantante (a meno che non si utilizzino le pastiglie multifunzione). • Il tappo del contenitore del sale sia serrato. 9.
ITALIANO 9.2 Pulizia dei mulinelli Non rimuovere i mulinelli. Se i fori dei mulinelli sono ostruiti da residui di sporco, liberarli servendosi di un oggetto a punta fine. 49 Utilizzare solo detergenti neutri. Non usare prodotti abrasivi, spugnette abrasive o solventi. 9.3 Pulizia esterna Pulire l'apparecchiatura con un panno inumidito e morbido. 10. RISOLUZIONE DEI PROBLEMI L'apparecchiatura non si avvia o si blocca durante il funzionamento.
www.aeg.com Problema Possibile soluzione L'apparecchiatura non scarica l'acqua. Controllare che lo scarico del lavello non sia ostruito. Verficare che il tubo di scarico non sia attorcigliato o piegato. Il dispositivo antiallagamento è attivo. Chiudere il rubinetto dell’acqua e contattare il Centro di Assistenza. Una volta effettuati questi controlli, accendere l'apparecchiatura. Il programma riprende dal punto in cui era stato interrotto.
ITALIANO 51 11. DATI TECNICI Dimensioni Larghezza x Altezza x Profondità (mm) 596 / 818 - 898 / 550 Collegamento elettrico Fare riferimento alla targhetta dati. Tensione 220-240 V Frequenza 50 Hz Pressione dell’acqua di Min./max. (bar/MPa) alimentazione (0.5 / 0.05 ) / (8 / 0.8 ) Collegamento dell'acqua 1) Acqua fredda o calda2) max. 60°C Capacità Coperti Assorbimento elettrico Modalità left-on 0.10 W Modalità Off 0.
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 53 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com • If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments.
ENGLISH 55 2. PRODUCT DESCRIPTION 1 2 3 12 11 10 9 8 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Salt container 7 Water hardness dial 8 Rinse aid dispenser 9 Detergent dispenser 10 Cutlery basket 11 Lower basket 12 Upper basket 2.1 Beam-on-Floor The Beam-on-Floor is a light that shows on the floor below the appliance door. 7 6 5 4 • When the programme starts to operate, the red light comes on and stays on for all the duration of the programme.
www.aeg.com 3. CONTROL PANEL 2 1 3 4 5 6 7 8 9 1 On/off button 6 TimeSaver button 2 Display 3 Delay button 7 Multitab button 4 Program button 9 Indicators 8 RESET button 5 ExtraHygiene button Indicators Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. End indicator. 4.
ENGLISH 57 1) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the programme duration. 2) This programme has a high temperature rinsing phase for better hygiene results. During the rinsing phase, the temperature stays at 70 °C for at least 10 minutes. 3) This is the most silent washing programme. The pump works at a very low speed to decrease the level of noise.
www.aeg.com 5.1 ExtraHygiene With this option you have better hygiene results. During the rinsing phase, the temperature stays at 70 °C for at least 10 minutes. How to activate the ExtraHygiene option 1. Press ExtraHygiene. The related indicator comes on. In the display you can see the update of the programme duration. • If the option is not applicable to the programme, the related indicator flashes quickly 3 times and then goes off. 5.
ENGLISH 59 6. BEFORE FIRST USE 1. Make sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. Contact your local water authority to know the water hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a programme to remove them. Do not use detergent and do not load the baskets. 6.
www.aeg.com indicators of Delay, Program and ExtraHygiene start to flash. 3. Press Delay. • The indicators of Program and ExtraHygiene go off. • The indicator of Delay continues to flash. • The acoustic signals operate, e.g. five intermittent acoustic signals = level 5. • The display shows the current setting of the water softener, e.g. = level 5. 4. Press Delay again and again to change the setting. 5. Press the on/off button to deactivate the appliance and to confirm the setting. 6.
ENGLISH 61 7. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to ’Setting and starting a programme’. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. • If you use the combi detergent tablets, activate the Multitab option. 5.
www.aeg.com pliance continues from the point of interruption. Cancelling the delay start while the countdown operates When you cancel the delay start, also the programme is cancelled. 1. Press RESET. The display shows 2 horizontal status bars. 2. Set the programme again. Cancelling the programme 1. Press RESET. The display shows 2 horizontal status bars. Make sure that there is detergent in the detergent dispenser before you start a new programme. At the end of the programme 1.
ENGLISH • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the items. • To remove easily remaining burned food, soak pots and pans in water before you put them in the appliance. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery. • Make sure that glasses do not touch other glasses. • Put the small items in the cutlery basket.
www.aeg.com 2. 3. 4. 5. A1 A2 6. 7. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Before you put the filter (B) back, make sure that there are no residues of food or soil in or around the edge of the sump. Make sure that the filter (B) is correctly positioned under the 2 guides (C). Assemble the filter (A) and put it back in filter (B). Turn it clockwise until it locks.
ENGLISH 65 Problem Possible solution The programme does not start. Make sure that the appliance door is closed. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with water. Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clogged.
www.aeg.com • The display shows the current setting. Rinse aid dispenser off. Rinse aid dispenser on. 4. Press Program to change the setting. 5. Press the on/off button to deactivate the appliance and to confirm the setting. 6. Adjust the released quantity of rinse aid. 7. Fill the rinse aid dispenser. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth (mm) Electrical connection Refer to the rating plate.
ENGLISH 67
117910360-A-492012 www.aeg.