User manual

signal is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously and until
the indicators
, , and
start to flash and the display is blank.
2. Press
• The indicators , and go
off.
• The indicator
continues to
flash.
• The display shows the current
setting: = Acoustic signal off.
3. Press
to change the setting.
= Acoustic signal on.
4. Press the on/off button to confirm
the setting.
7. OPTIONS
Desired options must be
activated every time before
you start a programme
(except for Multitab).
It is not possible to activate
or deactivate options while a
programme is running.
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions. They can also
contain other cleaning or rinsing agents.
This option deactivates the release of
salt. The salt indicator does not come on.
This option also deactivates the release
of rinse aid but only when the rinse aid
dispenser is deactivated, (rinse aid
indicator does not come on). If the rinse
aid dispenser is activated, rinse aid is
released even with the option Multitab
activated.
With the use of this option the
programme duration is prolonged to
increase the cleaning and drying results
with the use of multi-tablets.
You do not need to activate the option
Multitab every time you start a
programme. Once you have activated
the option it will remain active.
How to activate Multitab
Press .
The related indicator comes on.
7.2 TimeSaver
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
The total programme duration decreases
by approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
How to activate TimeSaver
Press , the related indicator comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
7.3 ExtraHygiene
This option provides better hygiene
results by keeping the temperature at 70
°C for at least 10 minutes during the last
rinsing phase.
The ExtraHygiene option combined with
the programme PREWASH , allows to
clean thoroughly and to sanitize the
inside of the appliance.
The duration of the programme
PREWASH will increase when used
with the ExtraHygiene option. The
ENGLISH
11