User manual

A B
1. Connect the green and yellow (earth)
wire to the terminal which is marked
with the letter 'E', or the earth
symbol
, or coloured green and
yellow.
2. Connect the blue (neutral) wire to the
terminal which is marked with the
letter 'N' or coloured blue.
3. Connect the brown (live) wire to the
terminal which is marked with the
letter 'L'. It must always be
connected to the network phase.
There must be no cut or stray strands
of wire present. The cord clamp must
be correctly attached to the outer
sheath.
8.8 Assembly
1.
2.
3.
40-50 mm
55 mm
30 mm
min. 650 mm
490 mm
340 mm
min. 100 mm
4.
5.
6.
B
A
A) supplied seal
B) assembled bracket
www.aeg.com
16