HC412001GB USER MANUAL EN User Manual Hob
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................5 3. INSTALLATION............................................................................................................7 4. PRODUCT DESCRIPTION.........................................................................................11 5. DAILY USE..
ENGLISH 3 usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
www.aeg.com • • • • • • • • • • CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. If the glass ceramic surface / glass surface is cracked, switch off the appliance and unplug it from the mains.
ENGLISH 5 for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents. 2. SAFETY INSTRUCTIONS This appliance is suitable for the following markets: IT 2.1 Installation WARNING! Only a qualified person must install this appliance. WARNING! Risk of injury or damage to the appliance. • Remove all the packaging. • Do not install or use a damaged appliance. • Follow the installation instructions supplied with the appliance.
www.aeg.com • • • • access to the mains plug after the installation. If the mains socket is loose, do not connect the mains plug. Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles.
ENGLISH • Make sure the flame does not go out when you quickly turn the knob from the maximum to the minimum position. • Use only the accessories supplied with the appliance. • Do not install a flame diffuser on the burner. • The use of a gas cooking appliance results in the production of heat and moisture. Provide good ventilation in the room where the appliance is installed.
www.aeg.com 3.2 Gas Connection WARNING! The following instructions about installation, maintenance and ventilation must be carried out by qualified personnel in compliance with the regulation in force (UNI-CIG 7129 - 7131). Make sure that the kitchen is well ventilated: keep natural ventilation holes open (at least 100 cm²) or install a mechanical extractor hood. Choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in force.
ENGLISH 4. With a thin screwdriver, adjust the bypass screw position (A). 9 clamps which are on the side of the cabinet. A A 5. If you change: • from natural gas G20 20 mbar to liquid gas, fully tighten the bypass screw in. • from liquid gas to natural gas G20 20 mbar, undo the bypass screw approximately 1/4 of a turn. WARNING! Make sure the flame does not go out when you quickly turn the knob from the maximum position to the minimum position. 3.
www.aeg.com 7. 3. min. 100 mm min. 650 mm 40-50 mm 490 mm 55 mm 30 mm 340 mm 4. CAUTION! Install the appliance only on a worktop with flat surface. 3.8 Installation of more than one hob Supplied accessories: connection bar, sealing stripe. Use only a special heatresistant silicone. 5.
ENGLISH 11 3.9 Installing hob under the hood If you install the hob under a hood, please see the installation instructions of the hood for the minimum distance between the appliances. 3.10 Possibilities for insertion 6. Insert next hob into the worktop cutout. Make sure that the front edges of the hobs are on the same level. The panel installed below the hob must be easy to remove and let an easy access in case a technical assistance intervention is necessary. Kitchen unit with door A.
www.aeg.com 5. DAILY USE WARNING! Refer to Safety chapters. If after some tries the burner does not light, check if the crown and its cap are in correct positions. 5.1 Burner overview A B C D A. B. C. D. Burner cap Burner crown Ignition candle Thermocouple 5.2 Ignition of the burner Always light the burner before you put on the cookware. WARNING! Be very careful when you use open fire in the kitchen environment. The manufacturer declines any responsibility in case of the flame misuse. 1.
ENGLISH 13 WARNING! Always turn the flame down or switch it off before you remove the pans from the burner. 6. HINTS AND TIPS CAUTION! Make sure that the pots are placed centrally on the burner in order to get the maximum stability and a lower gas consumption. WARNING! Refer to Safety chapters. 6.1 Cookware CAUTION! Do not use cast iron pans, clay or earthenware pots, grill or toaster plates. WARNING! Do not put the same pan on two burners.
www.aeg.com 7.2 Pan supports The pan supports are not resistant to washing in a dishwasher. They must be washed by hand. Do not lift the pan supports at an angle, as this will put strain on the metal pins. This can cause damage to the pins and cause them to break. 1. Remove the pan supports to easily clean the hob. Be very careful when you replace the pan supports to prevent the hob top from damage. 2.
ENGLISH cleaning, wipe the hob dry with a soft cloth. • To clean the enamelled parts, caps and crowns, wash them with warm soapy water and dry them carefully before you put them back on. 7.5 Cleaning the spark plug This feature is obtained through a ceramic ignition candle with a metal 15 electrode. Keep these components well clean to prevent difficult lighting and check that the burner crown holes are not obstructed. 7.
www.aeg.com 8.3 Labels supplied with the accessories bag Stick the adhesive labels as indicated below: A B MOD. MOD. PROD.NO. PROD.NO. SER.NO SER.NO DATA DATA C MOD. PROD.NO. SER.NO. 0049 TYPE IP20 03 IT MADE IN ITALY A. Stick it on Guarantee Card and send this part (if applicable). B. Stick it on Guarantee Card and keep this part (if applicable). C. Stick it on instruction booklet. 9. TECHNICAL DATA 9.1 Hob dimensions Width 360 mm Depth 520 mm 9.
ENGLISH 17 9.3 Other technical data TOTAL POWER: Gas original: G20 (2H) 20 mbar 3,95 kW Gas replacement: G30 (3+) 28-30 mbar 276 g/h G31 (3+) 37 mbar 271 g/h Electric supply: 220-240 V ~ 50/60 Hz Appliance category: II2H3+ Gas connection: G 1/2" Appliance class: 3 9.4 Gas burners for NATURAL GAS G20 20 mbar BURNER NORMAL POWER kW MINIMUM POWER kW INJECTOR MARK Rapid 2,95 0,75 119o Auxiliary 1,0 0,33 70 9.
www.aeg.com 10.2 Energy saving • • • • • • • Before use, make sure that the burners and pan supports are assembled correctly. Use cookware with diameters applicable to the size of burners. Center the pot on the burner. When you heat up water, use only the amount you need. If it is possible, always put the lids on the cookware. When the liquid starts to boil, turn down the flame to barely simmer the liquid. If it is possible, use a pressure cooker. Refer to its user manual. 11.
ENGLISH 19
867345387-C-442018 www.aeg.