HC412001GB USER MANUAL PL Instrukcja obsługi Płyta grzejna
www.aeg.com SPIS TREŚCI 1. INFORMACJE DOTYCZĄCE BEZPIECZEŃSTWA..............................................2 2. WSKAZÓWKI DOTYCZĄCE BEZPIECZEŃSTWA...............................................5 3. INSTALACJA........................................................................................................ 8 4. OPIS URZĄDZENIA............................................................................................13 5. CODZIENNA EKSPLOATACJA......................................................
POLSKI 3 za obrażenia ciała ani szkody spowodowane nieprawidłową instalacją lub eksploatacją urządzenia. Należy zachować instrukcję obsługi w bezpiecznym i łatwo dostępnym miejscu do wykorzystania w przyszłości. 1.
www.aeg.com • • • • • • • • • • temperatury. Należy zachować ostrożność, aby uniknąć kontaktu z elementami grzejnymi. Nie sterować urządzeniem za pomocą zewnętrznego programatora czasowego ani niezależnego układu zdalnego sterowania. OSTRZEŻENIE: Pozostawienie bez nadzoru potraw zawierających tłuszcz lub olej na włączonej płycie grzejnej może być przyczyną pożaru. NIE gasić pożaru wodą – należy wyłączyć urządzenie, a następnie przykryć płomień pokrywą lub kocem gaśniczym.
POLSKI • • • 5 producent, autoryzowany serwis lub inna wykwalifikowana osoba. Jeśli urządzenie podłączono bezpośrednio do źródła zasilania, należy zastosować wyłącznik z rozłączaniem pełnobiegunowym i izolacją styków. Należy zapewnić pełne rozłączenie zgodnie z wymaganiami kategorii III ochrony przeciwprzepięciowej. Nie dotyczy to przewodu uziemienia.
www.aeg.com • umożliwić prawidłowy obieg powietrza. Spód urządzenia może się mocno nagrzewać. Pod urządzeniem należy zamontować niepalną płytę, uniemożliwiającą dostęp do urządzenia od spodu. 2.2 Podłączenie do sieci elektrycznej OSTRZEŻENIE! Zagrożenie pożarem i porażeniem prądem elektrycznym. • • • • • • • • • • • • Wszystkie połączenia elektryczne powinien wykonać wykwalifikowany elektryk. Urządzenie musi być uziemione.
POLSKI podłączyć zgodnie z aktualnie obowiązującymi przepisami dotyczącymi instalacji. Zwrócić uwagę na wymagania dotyczące odpowiedniej wentylacji. 2.4 Eksploatacja OSTRZEŻENIE! Zagrożenie odniesieniem obrażeń, oparzeniem i porażeniem prądem. • • • • • • • • • • Przed pierwszym użyciem urządzenia należy usunąć z niego wszystkie elementy opakowania, etykiety i folię ochronną (jeśli dotyczy). Z urządzenia należy korzystać w warunkach domowych. Nie zmieniać parametrów technicznych urządzenia.
www.aeg.com • kwaśnym, takimi jak ocet, sok cytrynowy czy środki do usuwania kamienia. Mogłoby to spowodować jej zmatowienie. Odbarwienie emalii lub stali nierdzewnej nie ma wpływu na działanie urządzenia. 2.5 Konserwacja i czyszczenie OSTRZEŻENIE! Nie demontować przycisków, pokręteł ani uszczelek z panelu sterowania. Woda może dostać się do wnętrza urządzenia, powodując uszkodzenia. • • • • • Aby zapobiec uszkodzeniu powierzchni urządzenia, należy regularnie ją czyścić.
POLSKI 3.2 Podłączenie do instalacji gazowej OSTRZEŻENIE! Poniższe instrukcje dotyczące instalacji, podłączenia i konserwacji są przeznaczone dla wykwalifikowanych osób, które muszą się do nich stosować zgodnie z obowiązującymi normami oraz miejscowymi przepisami. Należy zastosować połączenia sztywne lub elastyczny wąż ze stali nierdzewnej, zgodnie z obowiązującymi przepisami.
www.aeg.com rodzaju gazu (patrz: tabela w rozdziale „Dane techniczne”). 4. Zmontować części, wykonując tą samą procedurę w odwrotnej kolejności. 5. Wymienić tabliczkę znamionową (znajdującą się obok króćca przyłączeniowego gazu) na odpowiednią dla nowego rodzaju gazu. Tabliczka znajduje się w torebce dołączonej do urządzenia. Jeśli ciśnienie dostarczanego gazu jest zmienne lub inne niż wymagane, należy zainstalować odpowiedni reduktor ciśnienia na rurze doprowadzającej gaz. 3.
POLSKI • • • • Należy zadbać o to, aby po zakończeniu instalacji urządzenia wtyczka przewodu zasilającego była łatwo dostępna. Odłączając urządzenie, nie należy ciągnąć za przewód zasilający. Należy zawsze ciągnąć za wtyczkę sieciową. Podłączenie urządzenia do zasilania za pomocą przedłużacza, adaptera lub rozgałęźnika stwarza zagrożenie pożarem. Upewnić się, że parametry uziemienia odpowiadają normom oraz przepisom. Nie dopuszczać do nagrzania przewodu zasilającego do temperatury wyższej niż 90°C.
www.aeg.com Wycięcie w blacie roboczym 5. Odległość minimum 50 mm od ściany Głębokość 490 mm Szerokość suma szerokości wszystkich instalowanych płyt grzejnych minus 20 mm Przykład: 580 mm A B 7. A) dołączona uszczelka B) zamontowany uchwyt + 360 mm - 20 mm = 920 mm 490 mm 6. 520 mm 12 Montaż 1. Obliczyć prawidłowe wymiary wycięcia. 2. Przygotować wycięcie w blacie roboczym. 3. Położyć każdą płytę grzejną na miękkim podłożu (np. na kocu) spodem do góry. 4.
POLSKI 13 A. Wyjmowana przegroda B. Przestrzeń na podłączenia 7. Wyczyścić szklane powierzchnie. 3.11 Możliwości zabudowy Szafka kuchenna z piekarnikiem Podłączenie do sieci elektrycznej płyty kuchennej i piekarnika należy wykonać osobno ze względów bezpieczeństwa oraz w celu umożliwienia łatwego wyjęcia piekarnika z szafki. Przegroda zamontowana pod płytą grzejną musi dać się łatwo wyjąć i umożliwić swobodny dostęp w razie wymaganej interwencji.
www.aeg.com Symbol Opis minimalny dopływ gazu 5. CODZIENNA EKSPLOATACJA zegara, do położenia maksymalnego OSTRZEŻENIE! Patrz rozdział dotyczący bezpieczeństwa. dopływu gazu ( ). 2. Przytrzymać wciśnięte pokrętło sterujące do 10 sekund. Umożliwi to rozgrzanie się termopary. W przeciwnym razie nastąpi przerwanie dopływu gazu. 3. Wyregulować wielkość płomienia po jego ustabilizowaniu się. 5.1 Widok palnika A B C D A. B. C. D. Pokrywka palnika Głowica palnika Elektroda zapłonowa Termopara 5.
POLSKI Jeśli palnik przypadkowo zgaśnie, należy obrócić pokrętło do położenia wyłączenia i odczekać co najmniej 1 minutę przed ponowną próbą zapalenia płomienia. Iskrownik może uruchomić się automatycznie po włączeniu dopływu gazu, zakończeniu instalacji lub przerwie w dostawie prądu. Jest to normalne zjawisko. Płyta grzejna jest wyposażona w zawory stopniowe. Dzięki nim regulacja płomienia jest bardziej precyzyjna. 5.
www.aeg.com 7. KONSERWACJA I CZYSZCZENIE OSTRZEŻENIE! Patrz rozdział dotyczący bezpieczeństwa. 7.1 Informacje ogólne • • • • Czyścić płytę grzejną po każdym użyciu. Zawsze używać naczyń z czystym dnem. Zarysowania lub ciemne plamy na powierzchni nie mają wpływu na działanie płyty grzejnej. Stosować odpowiednie środki przeznaczone do czyszczenia powierzchni płyty grzejnej.
POLSKI • • 17 Usunąć, gdy płyta grzejna wystarczająco ostygnie: ślady osadu kamienia i wody, plamy tłuszczu, metaliczne odbarwienia. Przetrzeć płytę grzejną wilgotną szmatką z dodatkiem delikatnego detergentu. Po wyczyszczeniu wytrzeć płytę grzejną do sucha miękką szmatką. Emaliowane części, pokrywki i głowice palników należy myć ciepłą wodą z dodatkiem płynu do mycia naczyń, a następnie dokładnie osuszyć przed ponownym założeniem. 7.
www.aeg.com Problem Prawdopodobna przyczy‐ na Środek zaradczy Zadziałał bezpiecznik. Sprawdzić, czy przyczyną nieprawidłowego działania jest bezpiecznik. Jeżeli nad‐ al będzie dochodzić do wy‐ zwalania bezpiecznika, nale‐ ży skontaktować się z wy‐ kwalifikowanym elektrykiem. Pokrywa i głowica palnika nie są prawidłowo ułożone. Prawidłowo ułożyć pokrywę i głowicę palnika. Płomień gaśnie natychmiast po zapaleniu. Termopara nie rozgrzała się wystarczająco.
POLSKI 8.3 Naklejki znajdujące się w torebce z akcesoriami Naklejki należy przykleić w następujących miejscach: A B MOD. MOD. PROD.NO. PROD.NO. SER.NO SER.NO DATA DATA C MOD. PROD.NO. SER.NO. 0049 TYPE IP20 03 IT MADE IN ITALY A. Na karcie gwarancyjnej i odesłać tę część (jeśli dotyczy). B. Na karcie gwarancyjnej i zachować tę część (jeśli dotyczy). C. Na instrukcji obsługi. 9. DANE TECHNICZNE 9.1 Wymiary płyty grzejnej Szerokość 360 mm Głębokość 520 mm 9.
www.aeg.com Podłączenie do R 1/2" instalacji gazo‐ wej: Klasa urządze‐ nia: 3 9.3 Średnice obejścia PALNIK Ø OBEJŚCIA 1/100 mm Duży palnik 45 Mały palnik 26 9.4 Palniki do GAZU ZIEMNEGO G20 20 mbar PALNIK MOC ZNAMIONO‐ WA kW MOC MINIMALNA kW OZNACZENIE DY‐ SZY Duży palnik 2,95 0,75 119o Mały palnik 1,0 0,33 70 9.
POLSKI 21 10. EFEKTYWNOŚĆ ENERGETYCZNA 10.1 Informacje o produkcie zgodnie z normą UE 66/2014 Oznaczenie modelu HC412001GB Typ płyty grzejnej Płyta grzejna do zabudowy Liczba palników gazowych 2 Sprawność energetyczna na palnik Środkowy tylny – duży (EE gas burner) Środkowy przedni – mały 56.7% Sprawność energetyczna płyty ga‐ zowej (EE gas hob) 56.
www.aeg.
POLSKI 23
867345383-B-462018 www.aeg.